unit U_TradeFinishClothInEdit;

interface

uses
  Windows, Messages, SysUtils, Variants, Classes, Graphics, Controls, Forms,
  Dialogs, cxStyles, cxCustomData, cxGraphics, cxFilter, cxData, cxDataStorage,
  cxEdit, DB, cxDBData, cxCalendar, cxDropDownEdit, ComCtrls, ToolWin,
  cxGridLevel, cxGridCustomTableView, cxGridTableView, cxGridDBTableView,
  cxClasses, cxControls, cxGridCustomView, cxGrid, cxGridCustomPopupMenu,
  cxGridPopupMenu, ADODB, DBClient, cxButtonEdit, cxTextEdit, StdCtrls, ExtCtrls,
  cxLookAndFeels, cxLookAndFeelPainters, cxNavigator, dxSkinsCore,
  dxSkinsDefaultPainters, dxDateRanges, dxBarBuiltInMenu, U_BaseInput,
  System.ImageList, Vcl.ImgList, cxCheckBox, cxPC;

type
  TfrmTradeFinishClothInEdit = class(TfrmBaseInput)
    cxGrid1: TcxGrid;
    Tv1: TcxGridDBTableView;
    v1Column2: TcxGridDBColumn;
    v1SPName: TcxGridDBColumn;
    v2Column6: TcxGridDBColumn;
    cxGrid1Level1: TcxGridLevel;
    ToolBar1: TToolBar;
    TBAdd: TToolButton;
    TBDel: TToolButton;
    TBSave: TToolButton;
    TBClose: TToolButton;
    v1Column4: TcxGridDBColumn;
    DS_1: TDataSource;
    CDS_Sub: TClientDataSet;
    ADOQueryCmd: TADOQuery;
    ADOQueryMain: TADOQuery;
    ADOQueryTemp: TADOQuery;
    GPM_1: TcxGridPopupMenu;
    v1Column12: TcxGridDBColumn;
    v1FactoryName: TcxGridDBColumn;
    v1Column6: TcxGridDBColumn;
    v1SPSpec: TcxGridDBColumn;
    v1QtyUnit: TcxGridDBColumn;
    v1Column5: TcxGridDBColumn;
    v1SPMF: TcxGridDBColumn;
    v1Column8: TcxGridDBColumn;
    v1Column9: TcxGridDBColumn;
    v1Column7: TcxGridDBColumn;
    Tv1Column3: TcxGridDBColumn;
    Tv1Column5: TcxGridDBColumn;
    Tv1Column1: TcxGridDBColumn;
    Tv1Column2: TcxGridDBColumn;
    Tv1Column4: TcxGridDBColumn;
    ToolButton1: TToolButton;
    Tv1Column6: TcxGridDBColumn;
    ToolButton2: TToolButton;
    Tv1Column7: TcxGridDBColumn;
    Tv1Column8: TcxGridDBColumn;
    Tv1Column9: TcxGridDBColumn;
    Tv1Column10: TcxGridDBColumn;
    Tv1Column11: TcxGridDBColumn;
    Tv1Column12: TcxGridDBColumn;
    Tv1Column13: TcxGridDBColumn;
    Tv1Column14: TcxGridDBColumn;
    Tv1Column15: TcxGridDBColumn;
    Tv1Column16: TcxGridDBColumn;
    ADO_3: TADOQuery;
    GPM_3: TcxGridPopupMenu;
    CDS_3: TClientDataSet;
    DS_3: TDataSource;
    DS_2: TDataSource;
    CDS_2: TClientDataSet;
    GPM_2: TcxGridPopupMenu;
    ADO_2: TADOQuery;
    cxPageControl1: TcxPageControl;
    cxTabSheet1: TcxTabSheet;
    Pnl_F2: TPanel;
    Label3: TLabel;
    Label1: TLabel;
    PurNo: TEdit;
    C_Name: TEdit;
    cxGrid2: TcxGrid;
    TV2: TcxGridDBTableView;
    cxGridDBColumn1: TcxGridDBColumn;
    cxGridDBColumn2: TcxGridDBColumn;
    cxGridDBColumn4: TcxGridDBColumn;
    cxGridDBColumn5: TcxGridDBColumn;
    cxGridDBColumn6: TcxGridDBColumn;
    cxGridDBColumn7: TcxGridDBColumn;
    cxGridDBColumn8: TcxGridDBColumn;
    VC_SCSCode: TcxGridDBColumn;
    cxGridDBColumn9: TcxGridDBColumn;
    cxGridDBColumn10: TcxGridDBColumn;
    cxGridDBColumn11: TcxGridDBColumn;
    cxGridDBColumn12: TcxGridDBColumn;
    cxGridDBColumn13: TcxGridDBColumn;
    cxGridDBColumn14: TcxGridDBColumn;
    cxGridDBColumn15: TcxGridDBColumn;
    cxGridDBColumn16: TcxGridDBColumn;
    v1PRTOrderQty: TcxGridDBColumn;
    v1OrderUnit: TcxGridDBColumn;
    cxGridDBColumn17: TcxGridDBColumn;
    TV2Column1: TcxGridDBColumn;
    TV2Column2: TcxGridDBColumn;
    cxGridLevel1: TcxGridLevel;
    cxTabSheet2: TcxTabSheet;
    cxGrid3: TcxGrid;
    TV3: TcxGridDBTableView;
    cxGridDBColumn18: TcxGridDBColumn;
    cxGridDBColumn19: TcxGridDBColumn;
    v1OrderNo: TcxGridDBColumn;
    v1ConNo: TcxGridDBColumn;
    v1DeliveryDate: TcxGridDBColumn;
    cxGridDBColumn20: TcxGridDBColumn;
    cxGridDBColumn21: TcxGridDBColumn;
    cxGridDBColumn22: TcxGridDBColumn;
    v1OrdDefStr1: TcxGridDBColumn;
    v1MPRTCodeName: TcxGridDBColumn;
    v1MPRTSpec: TcxGridDBColumn;
    cxGridDBColumn23: TcxGridDBColumn;
    v1MPRTMF: TcxGridDBColumn;
    v1MPRTKZ: TcxGridDBColumn;
    v1PRTColor: TcxGridDBColumn;
    cxGridDBColumn24: TcxGridDBColumn;
    cxGridDBColumn25: TcxGridDBColumn;
    cxGridDBColumn26: TcxGridDBColumn;
    cxGridDBColumn27: TcxGridDBColumn;
    cxGridDBColumn28: TcxGridDBColumn;
    v1Column3: TcxGridDBColumn;
    cxGridDBColumn29: TcxGridDBColumn;
    cxGridDBColumn30: TcxGridDBColumn;
    cxGridDBColumn31: TcxGridDBColumn;
    cxGridLevel2: TcxGridLevel;
    Pnl_F3: TPanel;
    Label2: TLabel;
    Label4: TLabel;
    Edit1: TEdit;
    Edit2: TEdit;
    ToolButton3: TToolButton;
    procedure FormClose(Sender: TObject; var Action: TCloseAction);
    procedure TBAddClick(Sender: TObject);
    procedure TBCloseClick(Sender: TObject);
    procedure FormShow(Sender: TObject);
    procedure TBDelClick(Sender: TObject);
    procedure TBSaveClick(Sender: TObject);
    procedure v1Column14PropertiesButtonClick(Sender: TObject; AButtonIndex: Integer);
    procedure v2Column1PropertiesButtonClick(Sender: TObject; AButtonIndex: Integer);
    procedure v1Column5PropertiesButtonClick(Sender: TObject; AButtonIndex: Integer);
    procedure v1Column8PropertiesButtonClick(Sender: TObject; AButtonIndex: Integer);
    procedure Tv1Column1PropertiesButtonClick(Sender: TObject; AButtonIndex: Integer);
    procedure Tv1Column4PropertiesButtonClick(Sender: TObject; AButtonIndex: Integer);
    procedure ToolButton1Click(Sender: TObject);
    procedure ButtonEdit(Sender: TObject; AButtonIndex: Integer);
    procedure PurNoKeyPress(Sender: TObject; var Key: Char);
    procedure TV2DblClick(Sender: TObject);
    procedure TV3DblClick(Sender: TObject);
    procedure ToolButton2Click(Sender: TObject);
    procedure ToolButton3Click(Sender: TObject);
    procedure cxPageControl1Change(Sender: TObject);
  private
    { Private declarations }
    function SaveData(MSaveType: string): Boolean;
    procedure InitReceipt();
    function CheckData(): Boolean;
  public
    { Public declarations }
    FBCId, canshu3, FSTKName, FKHName: string;
  end;

var
  frmTradeFinishClothInEdit: TfrmTradeFinishClothInEdit;

implementation

uses
  U_DataLink, U_RTFun, U_ZDYHelp, U_CompanySel, U_TradePlanSel, U_ClothInfoSel,
  U_PurchaseContractSel;

{$R *.dfm}

function TfrmTradeFinishClothInEdit.CheckData(): Boolean;
var
  mvalue, FReal: double;
begin
  try
    if CDS_Sub.IsEmpty then
      raise Exception.Create('明细不能为空！');

    if CDS_Sub.Locate('IOTime', null, []) = True then
      raise Exception.Create('入库时间不能为空！');

    if CDS_Sub.Locate('IOType', null, []) = True then
      raise Exception.Create('入库类型不能为空！');

    if CDS_Sub.Locate('FromCoName', null, []) = True then
      raise Exception.Create('来自单位不能为空！');

    if CDS_Sub.Locate('C_Name', null, []) = True then
      raise Exception.Create('品名不能为空！');

    if CDS_Sub.Locate('Piece', null, []) = True then
      raise Exception.Create('匹数不能为空！');

    if CDS_Sub.Locate('Qty', null, []) = True then
      raise Exception.Create('数量不能为空！');

    if CDS_Sub.Locate('QtyUnit', null, []) = True then
      raise Exception.Create('数量单位不能为空！');

    Result := True;
  except
    Result := false;
    application.MessageBox(PChar(Exception(ExceptObject).Message), '提示信息', 0);
  end;
end;

procedure TfrmTradeFinishClothInEdit.cxPageControl1Change(Sender: TObject);
begin
  InitReceipt();
end;

procedure TfrmTradeFinishClothInEdit.InitReceipt();
var
  FWSql: string;
begin

  case cxPageControl1.ActivePageIndex of
    0:
      begin
        FWSql := SGetHintFilters(Pnl_F2, 1, 2);
        if FWSql <> '' then
          FWSql := ' and ' + FWSql;

        with ADO_2 do
        begin
          Close;
          sql.Clear;
          sql.Add('select * ');
          sql.Add(' ,DHPS= (select SUM(X.Piece) from BS_Cloth_IO X where X.IOFlag=''入库'' and  X.FromPurSId=B.PurSId ) ');
          sql.Add(' ,DHQty=(select SUM(X.Qty) from BS_Cloth_IO X where X.IOFlag=''入库'' and  X.FromPurSId=B.PurSId ) ');
          sql.add('from Pur_ClothPlan_Main A inner join Pur_ClothPlan_Sub B on A.PurMId=B.PurMId  where isnull(A.status,''0'')=''9'' ');

          if Trim(FWSql) <> '' then
            sql.Add(FWSql);
          Open;
        end;
        SCreateCDS(ADO_2, CDS_2);
        SInitCDSData(ADO_2, CDS_2);

      end;
    1:
      begin
        FWSql := SGetHintFilters(Pnl_F3, 1, 2);
        if FWSql <> '' then
          FWSql := ' and ' + FWSql;

        with ADO_3 do
        begin
          Close;
          sql.Clear;
          sql.Add('select A.*    ');
          sql.Add(',SumPiece=(select Sum(X.Piece) from BS_Cloth_IO X where X.IOFlag=''入库'' and X.fromSubID=A.SubID and isnull(X.STKNAME,'''')=' + Quotedstr(Trim(FSTKNAME)) + ')');
          sql.Add(',SumQty=(select Sum(X.Qty) from BS_Cloth_IO X where X.IOFlag=''入库'' and X.fromSubID=A.SubID and isnull(X.STKNAME,'''')=' + Quotedstr(Trim(FSTKNAME)) + ')');
          sql.Add('from V_Trade_Plan_Fty A ');
          sql.add('where Status=''9'' ');
          if Trim(FWSql) <> '' then
            sql.Add(FWSql);
          Open;
        end;

        SCreateCDS(ADO_3, CDS_3);
        SInitCDSData(ADO_3, CDS_3);
      end;
  end;

end;

procedure TfrmTradeFinishClothInEdit.FormClose(Sender: TObject; var Action: TCloseAction);
begin
  inherited;
  Action := caFree;
end;

procedure TfrmTradeFinishClothInEdit.TBAddClick(Sender: TObject);
begin
  if CDS_Sub.IsEmpty = False then
  begin
    CopyAddRowCDS(CDS_Sub);
    with CDS_Sub do
    begin
      Edit;
      FieldByName('BCIOID').Value := null;
      FieldByName('StkCoNo').Value := '本厂仓库';
      FieldByName('StkCoName').Value := '本厂仓库';
      post;
    end;
  end
  else
  begin
    with CDS_Sub do
    begin
      Append;
      FieldByName('IOTime').Value := Trim(FormatDateTime('yyyy-MM-dd', Now));
      FieldByName('StkCoNo').Value := '本厂仓库';
      FieldByName('StkCoName').Value := '本厂仓库';
      FieldByName('QtyUnit').Value := 'KG';
      Post;
    end;
  end;

end;

function TfrmTradeFinishClothInEdit.SaveData(MSaveType: string): Boolean;
var
  Maxno, MBCIOID: string;
begin
  try
    ADOQueryCmd.Connection.BeginTrans;
    CDS_Sub.DisableControls;
    with CDS_Sub do
    begin
      First;
      while not eof do
      begin
        with ADOQueryTemp do
        begin
          Close;
          sql.Clear;
          sql.Add('select * from BS_Cloth_IO where BCIOID=''' + Trim(CDS_Sub.fieldbyname('BCIOID').AsString) + '''');
          open;
        end;
        MBCIOID := Trim(ADOQueryTemp.fieldbyname('BCIOID').AsString);
        if Trim(MBCIOID) = '' then
        begin
          if not GetLSNo(ADOQueryCmd, Maxno, 'MR', 'BS_Cloth_IO', 4, 1) then
            raise Exception.Create('取染色坯布入库编号失败！');
        end
        else
        begin
          Maxno := Trim(MBCIOID);
        end;
        with ADOQueryCmd do
        begin
          Close;
          sql.Clear;
          sql.Add('select * from BS_Cloth_IO where BCIOID=''' + Trim(Maxno) + '''');
          Open;
        end;
        with ADOQueryCmd do
        begin
          if Trim(MBCIOID) = '' then
          begin
            Append;
            FieldByName('Fillid').Value := Trim(Dcode);
            FieldByName('Filler').Value := Trim(DName);
          end
          else
          begin
            Edit;
            FieldByName('Editid').Value := Trim(Dcode);
            FieldByName('Editer').Value := Trim(DName);
            FieldByName('EditTime').Value := SGetServerDate(ADOQueryTemp);
          end;
          RTSetSaveDataCDS(ADOQueryCmd, Tv1, CDS_Sub, 'BS_Cloth_IO', 0);
          FieldByName('FromCoNo').Value := CDS_Sub.fieldbyname('FromCoNo').Value;
          FieldByName('StkCoNo').Value := CDS_Sub.fieldbyname('StkCoNo').Value;

          FieldByName('FromMainId').Value := CDS_Sub.fieldbyname('FromMainId').Value;
          FieldByName('FromSubId').Value := CDS_Sub.fieldbyname('FromSubId').Value;
          FieldByName('FromPurMId').Value := CDS_Sub.fieldbyname('FromPurMId').Value;
          FieldByName('FromPurSId').Value := CDS_Sub.fieldbyname('FromPurSId').Value;

          FieldByName('FromTPNID').Value := CDS_Sub.fieldbyname('FromTPNID').Value;
          FieldByName('BCIOID').Value := Trim(Maxno);
          FieldByName('STKID').Value := Trim(Maxno);
          FieldByName('STKName').Value := FSTKName;
          FieldByName('IOFlag').Value := '入库';
          FieldByName('IOQtyFlag').Value := 1;
          Post;
        end;
        with ADOQueryCmd do
        begin
          Close;
          sql.Clear;
          sql.Add('Update BS_Cloth_IO Set StkPiece=(select Sum(isnull(Piece,0)*IOQtyFlag) from BS_Cloth_IO A where A.STKID=BS_Cloth_IO.BCIOID )');
          sql.Add(',StkQty=(select Sum(isnull(Qty,0)*IOQtyFlag) from BS_Cloth_IO A where A.STKID=BS_Cloth_IO.BCIOID )');
          sql.Add(' where BCIOID=''' + Trim(Maxno) + '''');
          ExecSQL;
        end;
        with ADOQueryTemp do
        begin
          Close;
          sql.Clear;
          sql.Add('select stkQty,StkPiece from BS_Cloth_IO where BCIOID=''' + Trim(Maxno) + '''');
          Open;
        end;
        if ADOQueryTemp.FieldByName('stkQty').Value < 0 then
          raise Exception.Create('入库数量小于出库数量不能保存!');
        if ADOQueryTemp.FieldByName('StkPiece').Value < 0 then
          raise Exception.Create('入库匹数小于出库匹数不能保存!');
        with ADOQueryCmd do
        begin
          Close;
          sql.Clear;
          sql.Add('insert into Finance_Need_Up(UType,UDataId,UOperation,UOperator,UModule,UDetails)       ');
          sql.Add('values(''贸易待检布入库''    ');
          sql.Add(',' + quotedstr(Maxno));
          sql.Add(',''保存''   ');
          sql.Add(',' + quotedstr(DName));
          sql.Add(',' + quotedstr(trim(self.Caption)));
          sql.Add(',' + quotedstr(Maxno));
          sql.Add(')  ');
          ExecSQL;
        end;

        if (MSaveType = '检验出库') or (MSaveType = '直接发货') then
        begin
          with ADOQueryCmd do
          begin
            Close;
            Sql.Clear;
            Sql.Add('exec P_BS_Cloth_OutBYIn ');
            Sql.Add(' @BCIOID=' + quotedstr(Trim(Maxno)));
            Sql.Add(' ,@OutType=' + quotedstr(MSaveType));
            Open;
          end;
          if ADOQueryCmd.FieldByName('intReturn').AsInteger = -1 then
            raise Exception.Create(pchar(trim(ADOQueryCmd.FieldByName('ShowMsg').AsString)));
        end;

        Edit;
        FieldByName('BCIOID').Value := Trim(Maxno);
        Post;
        Next;
      end;
    end;

    CDS_Sub.EnableControls;
    ADOQueryCmd.Connection.CommitTrans;

    Result := True;
  except
    Result := False;
    ADOQueryCmd.Connection.RollbackTrans;
    application.MessageBox(PChar(Exception(ExceptObject).Message), '提示信息', 0);
  end;

end;

procedure TfrmTradeFinishClothInEdit.TBCloseClick(Sender: TObject);
begin

  Close;
end;

procedure TfrmTradeFinishClothInEdit.FormShow(Sender: TObject);
begin
  inherited;
  ReadCxGrid(FSTKName + '入库登记', Tv1, '贸易汇总仓库');
  InitReceipt();
  with ADOQueryTemp do
  begin
    Close;
    sql.Clear;
    sql.Add(' select A.* ');
    sql.Add(' from BS_Cloth_IO A');
    sql.Add(' where BCIOID=''' + Trim(FBCId) + '''');
    Open;
  end;
  SCreateCDS(ADOQueryTemp, CDS_Sub);
  SInitCDSData(ADOQueryTemp, CDS_Sub);
end;

procedure TfrmTradeFinishClothInEdit.PurNoKeyPress(Sender: TObject; var Key: Char);
begin
  if Key = #13 then
  begin
    InitReceipt();
  end;
end;

procedure TfrmTradeFinishClothInEdit.TBDelClick(Sender: TObject);
begin
  if CDS_Sub.IsEmpty then
    Exit;
  if Trim(CDS_Sub.fieldbyname('BCIOID').AsString) <> '' then
  begin
    if Application.MessageBox('确定要删除数据吗？', '提示', 32 + 4) <> IDYES then
      Exit;
    with ADOQueryTemp do
    begin
      Close;
      sql.Clear;
      sql.Add('exec P_Fin_Flow_Judge ');
      Sql.Add(' @FFIDS=' + quotedstr(Trim(CDS_Sub.fieldbyname('BCIOID').AsString)));
      Sql.Add(',@DCode=' + quotedstr(Trim(DCode)));
      Sql.Add(',@DName=' + quotedstr(Trim(DName)));
      Open;
    end;
    if ADOQueryTemp.FieldByName('intReturn').AsInteger = -1 then
    begin
      Application.MessageBox(PChar(ADOQueryTemp.fieldbyname('ShowMsg').AsString), '提示', 0);
      exit;
    end;
    try
      ADOQueryCmd.Connection.BeginTrans;
      with ADOQueryCmd do
      begin
        Close;
        Sql.Clear;
        sql.Add('insert into Finance_Need_Up(UType,UDataId,UOperation,UOperator,UModule,UDetails)       ');
        sql.Add('values(''贸易待检布入库''    ');
        sql.Add(',' + quotedstr(Trim(CDS_Sub.fieldbyname('BCIOID').AsString)));
        sql.Add(',''删除''   ');
        sql.Add(',' + quotedstr(DName));
        sql.Add(',' + quotedstr(trim(self.Caption)));
        sql.Add(',' + quotedstr(Trim(CDS_Sub.fieldbyname('BCIOID').AsString)));
        sql.Add(')  ');

        Sql.Add('exec P_BS_Cloth_In_Del ');
        Sql.Add(' @BCIOIDS=' + quotedstr(Trim(CDS_Sub.fieldbyname('BCIOID').AsString)));
        Sql.Add(',@DCode=' + quotedstr(Trim(DCode)));
        Sql.Add(',@DName=' + quotedstr(Trim(DName)));
        Open;
      end;
      if ADOQueryCmd.FieldByName('intReturn').AsInteger = -1 then
        raise Exception.Create(pchar(trim(ADOQueryCmd.FieldByName('ShowMsg').AsString)));
      ADOQueryCmd.Connection.CommitTrans;
      CDS_Sub.Delete;
    except
      ADOQueryCmd.Connection.RollbackTrans;
      application.MessageBox(PChar(Exception(ExceptObject).Message), '提示信息', 0);
    end;
  end
  else
  begin
    CDS_Sub.Delete;
  end;

end;

procedure TfrmTradeFinishClothInEdit.TBSaveClick(Sender: TObject);
begin

  if CheckData() = false then
    exit;

  if SaveData('保存') then
  begin
    Application.MessageBox('保存成功!', '提示', 0);
    //ModalResult:=1;
    Exit;
  end;
end;

procedure TfrmTradeFinishClothInEdit.ToolButton1Click(Sender: TObject);
begin
  WriteCxGrid(FSTKName + '入库登记', Tv1, '贸易汇总仓库');
end;

procedure TfrmTradeFinishClothInEdit.ToolButton2Click(Sender: TObject);
begin
  if CheckData() = false then
    exit;

  if SaveData('检验出库') then
  begin
    Application.MessageBox('保存成功!', '提示', 0);
    //ModalResult:=1;
    Exit;
  end;
end;

procedure TfrmTradeFinishClothInEdit.ToolButton3Click(Sender: TObject);
begin
  if CheckData() = false then
    exit;

  if SaveData('直接发货') then
  begin
    Application.MessageBox('保存成功!', '提示', 0);
    //ModalResult:=1;
    Exit;
  end;
end;

procedure TfrmTradeFinishClothInEdit.Tv1Column1PropertiesButtonClick(Sender: TObject; AButtonIndex: Integer);
begin
  try
    frmCompanySel := TfrmCompanySel.Create(Application);
    with frmCompanySel do
    begin
      FCoType := '供应商';
      if ShowModal = 1 then
      begin
        with Self.CDS_Sub do
        begin
          Edit;
          FieldByName('StkCoNo').Value := Trim(CDS_1.fieldbyname('CoCode').AsString);
          FieldByName('StkCoName').Value := Trim(CDS_1.fieldbyname('CoAbbrName').AsString);
        end;
      end;
    end;
  finally
    frmCompanySel.Free;
  end;

end;

procedure TfrmTradeFinishClothInEdit.Tv1Column4PropertiesButtonClick(Sender: TObject; AButtonIndex: Integer);
begin
  try
    frmTradePlanSel := TfrmTradePlanSel.Create(Application);
    with frmTradePlanSel do
    begin
      if ShowModal = 1 then
      begin
        with Self.CDS_Sub do
        begin
          Edit;
          FieldByName('FromCoNo').Value := Trim(frmTradePlanSel.CDS_1.fieldbyname('FtyNo').AsString);
          FieldByName('FromCoName').Value := Trim(frmTradePlanSel.CDS_1.fieldbyname('FtyName').AsString);
          FieldByName('FromOrdNo').Value := Trim(frmTradePlanSel.CDS_1.fieldbyname('OrderNo').AsString);
          FieldByName('FromMainId').Value := Trim(frmTradePlanSel.CDS_1.fieldbyname('MainId').AsString);
          FieldByName('FromSubId').Value := Trim(frmTradePlanSel.CDS_1.fieldbyname('SubId').AsString);
          FieldByName('C_Code').Value := Trim(frmTradePlanSel.CDS_1.fieldbyname('C_Code').AsString);
          FieldByName('C_Name').Value := Trim(frmTradePlanSel.CDS_1.fieldbyname('C_Name').AsString);
          FieldByName('C_Spec').Value := Trim(frmTradePlanSel.CDS_1.fieldbyname('C_Spec').AsString);
          FieldByName('C_Composition').Value := Trim(frmTradePlanSel.CDS_1.fieldbyname('C_Composition').AsString);
          FieldByName('C_Width').Value := Trim(frmTradePlanSel.CDS_1.fieldbyname('C_Width').AsString);
          FieldByName('C_GramWeight').Value := Trim(frmTradePlanSel.CDS_1.fieldbyname('C_GramWeight').AsString);
          FieldByName('C_Color').Value := Trim(frmTradePlanSel.CDS_1.fieldbyname('C_Color').AsString);
          FieldByName('C_ColorNo').Value := Trim(frmTradePlanSel.CDS_1.fieldbyname('C_ColorNo').AsString);
          FieldByName('C_Pattern').Value := Trim(frmTradePlanSel.CDS_1.fieldbyname('C_Pattern').AsString);
        end;
      end;
    end;
  finally
    frmTradePlanSel.Free;
  end;
end;

procedure TfrmTradeFinishClothInEdit.TV2DblClick(Sender: TObject);
var
  MMaxno: string;
  CurRow: Integer;
begin
  CurRow := Tv2.Controller.FocusedRowIndex;
  with CDS_2 do
  begin
    Edit;
    Fieldbyname('SSel').Value := 1;
    Post;
  end;
  with CDS_2 do
  begin
    DisableControls;
    First;
    while not eof do
    begin
      if CDS_2.fieldbyname('SSel').AsBoolean then
      begin
        with Self.CDS_Sub do
        begin
          append;
          FieldByName('IOTime').Value := Trim(FormatDateTime('yyyy-MM-dd', Now));
          FieldByName('BCIOID').Value := null;
          FieldByName('IOType').Value := '加工入库';
          FieldByName('StkCoNo').Value := '本厂仓库';
          FieldByName('StkCoName').Value := '本厂仓库';
          FieldByName('FromCoNo').Value := Trim(CDS_2.fieldbyname('Sellno').AsString);
          FieldByName('FromCoName').Value := Trim(CDS_2.fieldbyname('Sellname').AsString);
          FieldByName('FromPurNo').Value := Trim(CDS_2.fieldbyname('PurNo').AsString);
          FieldByName('FromPurMId').Value := Trim(CDS_2.fieldbyname('PurMId').AsString);
          FieldByName('FromPurSId').Value := Trim(CDS_2.fieldbyname('PurSId').AsString);
          FieldByName('C_Code').Value := Trim(CDS_2.fieldbyname('C_Code').AsString);
          FieldByName('C_Name').Value := Trim(CDS_2.fieldbyname('C_Name').AsString);
          FieldByName('C_Spec').Value := Trim(CDS_2.fieldbyname('C_Spec').AsString);
          FieldByName('C_Composition').Value := Trim(CDS_2.fieldbyname('C_Composition').AsString);
          FieldByName('C_Width').Value := Trim(CDS_2.fieldbyname('C_Width').AsString);
          FieldByName('C_GramWeight').Value := Trim(CDS_2.fieldbyname('C_GramWeight').AsString);
          FieldByName('C_Color').Value := Trim(CDS_2.fieldbyname('C_Color').AsString);
          FieldByName('C_ColorNo').Value := Trim(CDS_2.fieldbyname('C_ColorNo').AsString);
          FieldByName('C_Pattern').Value := Trim(CDS_2.fieldbyname('C_Pattern').AsString);
          FieldByName('C_StyleNo').Value := Trim(CDS_2.fieldbyname('C_StyleNo').AsString);
          FieldByName('QtyUnit').Value := Trim(CDS_2.fieldbyname('QtyUnit').AsString);
        end;
      end;
      with CDS_2 do
      begin
        Edit;
        Fieldbyname('SSel').Value := 0;
        Post;
      end;
      Next;
    end;
    EnableControls;
  end;
  Tv2.Controller.FocusedRowIndex := CurRow;
end;

procedure TfrmTradeFinishClothInEdit.TV3DblClick(Sender: TObject);
var
  MMaxno: string;
  CurRow: Integer;
begin
  CurRow := Tv3.Controller.FocusedRowIndex;
  with CDS_3 do
  begin
    Edit;
    Fieldbyname('SSel').Value := 1;
    Post;
  end;
  with CDS_3 do
  begin
    DisableControls;
    First;
    while not eof do
    begin
      if CDS_3.fieldbyname('SSel').AsBoolean then
      begin
        with Self.CDS_Sub do
        begin
          append;
          FieldByName('IOTime').Value := Trim(FormatDateTime('yyyy-MM-dd', Now));
          FieldByName('BCIOID').Value := null;
          FieldByName('IOType').Value := '加工入库';
          FieldByName('StkCoNo').Value := '本厂仓库';
          FieldByName('StkCoName').Value := '本厂仓库';
          FieldByName('FromCoNo').Value := Trim(CDS_3.fieldbyname('FtyNo').AsString);
          FieldByName('FromCoName').Value := Trim(CDS_3.fieldbyname('FtyName').AsString);
          FieldByName('FromOrdNo').Value := Trim(CDS_3.fieldbyname('OrderNo').AsString);
          FieldByName('FromMainId').Value := Trim(CDS_3.fieldbyname('MainId').AsString);
          FieldByName('FromSubId').Value := Trim(CDS_3.fieldbyname('SubId').AsString);
          FieldByName('C_Code').Value := Trim(CDS_3.fieldbyname('C_Code').AsString);
          FieldByName('C_Name').Value := Trim(CDS_3.fieldbyname('C_Name').AsString);
          FieldByName('C_Spec').Value := Trim(CDS_3.fieldbyname('C_Spec').AsString);
          FieldByName('C_Composition').Value := Trim(CDS_3.fieldbyname('C_Composition').AsString);
          FieldByName('C_Width').Value := Trim(CDS_3.fieldbyname('C_Width').AsString);
          FieldByName('C_GramWeight').Value := Trim(CDS_3.fieldbyname('C_GramWeight').AsString);
          FieldByName('C_Color').Value := Trim(CDS_3.fieldbyname('C_Color').AsString);
          FieldByName('C_ColorNo').Value := Trim(CDS_3.fieldbyname('C_ColorNo').AsString);
          FieldByName('C_Pattern').Value := Trim(CDS_3.fieldbyname('C_Pattern').AsString);
          FieldByName('C_StyleNo').Value := Trim(CDS_3.fieldbyname('C_StyleNo').AsString);
          FieldByName('QtyUnit').Value := Trim(CDS_3.fieldbyname('OrdUnit').AsString);
        end;
      end;
      with CDS_3 do
      begin
        Edit;
        Fieldbyname('SSel').Value := 0;
        Post;
      end;
      Next;
    end;
    EnableControls;
  end;
  Tv3.Controller.FocusedRowIndex := CurRow;
end;

procedure TfrmTradeFinishClothInEdit.ButtonEdit(Sender: TObject; AButtonIndex: Integer);
begin
  try
    frmClothInfoSel := TfrmClothInfoSel.Create(Application);
    with frmClothInfoSel do
    begin
      if ShowModal = 1 then
      begin
        with Self.CDS_Sub do
        begin
          Edit;
          FieldByName('C_Code').Value := trim(frmClothInfoSel.CDS_1.Fieldbyname('C_Code').AsString);
          FieldByName('C_Name').Value := trim(frmClothInfoSel.CDS_1.Fieldbyname('C_Name').AsString);
          FieldByName('C_Spec').Value := trim(frmClothInfoSel.CDS_1.Fieldbyname('C_Spec').AsString);
          FieldByName('C_Composition').Value := trim(frmClothInfoSel.CDS_1.Fieldbyname('C_Composition').AsString);
          FieldByName('C_Width').Value := trim(frmClothInfoSel.CDS_1.Fieldbyname('C_Width').AsString);
          FieldByName('C_GramWeight').Value := trim(frmClothInfoSel.CDS_1.Fieldbyname('C_GramWeight').AsString);

          Fieldbyname('C_ColorNo').value := trim(frmClothInfoSel.CDS_1.Fieldbyname('C_ColorNo').AsString);
          Fieldbyname('C_Color').value := trim(frmClothInfoSel.CDS_1.Fieldbyname('C_Color').AsString);
          Fieldbyname('C_Pattern').value := trim(frmClothInfoSel.CDS_1.Fieldbyname('C_Pattern').AsString);
        end;

      end;
    end;
  finally
    frmClothInfoSel.Free;
  end;

end;

procedure TfrmTradeFinishClothInEdit.v1Column14PropertiesButtonClick(Sender: TObject; AButtonIndex: Integer);
begin

  try
    frmCompanySel := TfrmCompanySel.Create(Application);
    with frmCompanySel do
    begin
      FCoType := '供应商';
      if ShowModal = 1 then
      begin
        with Self.CDS_Sub do
        begin
          Edit;
          FieldByName('FromCoNo').Value := Trim(CDS_1.fieldbyname('CoCode').AsString);
          FieldByName('FromCoName').Value := Trim(CDS_1.fieldbyname('CoAbbrName').AsString);

          FieldByName('SalesER').Value := Trim(CDS_1.fieldbyname('SalesER').AsString);
        end;
      end;
    end;
  finally
    frmCompanySel.Free;
  end;

end;

procedure TfrmTradeFinishClothInEdit.v2Column1PropertiesButtonClick(Sender: TObject; AButtonIndex: Integer);
begin
  try
    frmZDYHelp := TfrmZDYHelp.Create(Application);
    with frmZDYHelp do
    begin
      flag := 'JWLYCLName';
      flagname := '品名';
      MainType := FSTKName;
      if ShowModal = 1 then
      begin
        with Self.CDS_Sub do
        begin
          Edit;
          FieldByName('C_Name').Value := Trim(frmZDYHelp.ClientDataSet1.fieldbyname('ZdyName').AsString);
        end;
      end;
    end;
  finally
    frmZDYHelp.Free;
  end;

end;

procedure TfrmTradeFinishClothInEdit.v1Column5PropertiesButtonClick(Sender: TObject; AButtonIndex: Integer);
begin
  try
    frmZDYHelp := TfrmZDYHelp.Create(Application);
    with frmZDYHelp do
    begin
      flag := 'StkPosition';
      flagname := '库位';
      MainType := FSTKName;
      if ShowModal = 1 then
      begin
        with Self.CDS_Sub do
        begin
          Edit;
          FieldByName('StkPosition').Value := Trim(frmZDYHelp.ClientDataSet1.fieldbyname('ZdyName').AsString);
        end;
      end;
    end;
  finally
    frmZDYHelp.Free;
  end;
end;

procedure TfrmTradeFinishClothInEdit.v1Column8PropertiesButtonClick(Sender: TObject; AButtonIndex: Integer);
begin
  try
    frmZDYHelp := TfrmZDYHelp.Create(Application);
    with frmZDYHelp do
    begin
      flag := 'C_Spec';
      flagname := '规格';
      MainType := FSTKName;
      if ShowModal = 1 then
      begin
        with Self.CDS_Sub do
        begin
          Edit;
          FieldByName('C_Spec').Value := Trim(frmZDYHelp.ClientDataSet1.fieldbyname('ZdyName').AsString);
        end;
      end;
    end;
  finally
    frmZDYHelp.Free;
  end;
end;

end.