unit U_TatMachInsp; interface uses Windows, Messages, SysUtils, StrUtils, Variants, Classes, Graphics, Controls, Forms, Dialogs, StdCtrls, cxStyles, cxCustomData, cxGraphics, cxFilter, cxData, cxDataStorage, cxEdit, DB, cxDBData, cxCalendar, cxGridLevel, cxGridCustomTableView, cxGridTableView, cxGridDBTableView, cxClasses, cxControls, cxGridCustomView, cxGrid, RM_Common, RM_Class, RM_GridReport, RM_System, RM_Dataset, ADODB, DBClient, cxGridCustomPopupMenu, cxGridPopupMenu, ExtCtrls, ComCtrls, ToolWin, cxTextEdit, Buttons, cxSplitter, cxCheckBox, MovePanel, cxLookAndFeels, cxLookAndFeelPainters, cxNavigator, Menus, U_BaseList, dxSkinsCore, dxSkinsDefaultPainters, dxDateRanges, dxBarBuiltInMenu, cxContainer, cxImage, cxDBEdit, IdBaseComponent, IdComponent, IdTCPConnection, IdTCPClient, IdExplicitTLSClientServerBase, ShellAPI, IdFTP, FireDAC.Stan.StorageXML, cxPC, XMLDoc, XMLIntf, DateUtils, cxMaskEdit, cxButtonEdit; type TfrmTatMachInsp = class(TfrmBaseList) cxStyleRepository1: TcxStyleRepository; cxStyle1: TcxStyle; cxStyle2: TcxStyle; GPM_1: TcxGridPopupMenu; ADOQueryMain: TADOQuery; ADOCmd: TADOQuery; RMDB_1: TRMDBDataSet; DS_2: TDataSource; CDS_2: TClientDataSet; ADOQueryPrint: TADOQuery; GPM_2: TcxGridPopupMenu; ADOQueryMainDSC: TADOQuery; Panel7: TPanel; AOrdDefNote1: TRichEdit; RM1: TRMGridReport; ADOTmp: TADOQuery; ScrollBox1: TScrollBox; SpeedButton13: TSpeedButton; SpeedButton14: TSpeedButton; SpeedButton15: TSpeedButton; SpeedButton16: TSpeedButton; SpeedButton17: TSpeedButton; SpeedButton18: TSpeedButton; SpeedButton21: TSpeedButton; SpeedButton22: TSpeedButton; SpeedButton23: TSpeedButton; SpeedButton24: TSpeedButton; SpeedButton25: TSpeedButton; SpeedButton26: TSpeedButton; SpeedButton29: TSpeedButton; SpeedButton30: TSpeedButton; SpeedButton31: TSpeedButton; SpeedButton32: TSpeedButton; SpeedButton33: TSpeedButton; SpeedButton34: TSpeedButton; SpeedButton37: TSpeedButton; SpeedButton38: TSpeedButton; SpeedButton39: TSpeedButton; SpeedButton40: TSpeedButton; SpeedButton41: TSpeedButton; SpeedButton42: TSpeedButton; SpeedButton45: TSpeedButton; SpeedButton46: TSpeedButton; SpeedButton47: TSpeedButton; SpeedButton48: TSpeedButton; SpeedButton50: TSpeedButton; SpeedButton51: TSpeedButton; SpeedButton54: TSpeedButton; SpeedButton55: TSpeedButton; SpeedButton56: TSpeedButton; SpeedButton57: TSpeedButton; SpeedButton58: TSpeedButton; SpeedButton59: TSpeedButton; SpeedButton62: TSpeedButton; SpeedButton63: TSpeedButton; SpeedButton64: TSpeedButton; SpeedButton65: TSpeedButton; SpeedButton66: TSpeedButton; SpeedButton67: TSpeedButton; SpeedButton70: TSpeedButton; SpeedButton71: TSpeedButton; SpeedButton72: TSpeedButton; SpeedButton73: TSpeedButton; SpeedButton74: TSpeedButton; SpeedButton75: TSpeedButton; SpeedButton19: TSpeedButton; SpeedButton20: TSpeedButton; SpeedButton27: TSpeedButton; SpeedButton28: TSpeedButton; SpeedButton35: TSpeedButton; SpeedButton36: TSpeedButton; SpeedButton43: TSpeedButton; SpeedButton44: TSpeedButton; SpeedButton52: TSpeedButton; SpeedButton53: TSpeedButton; SpeedButton60: TSpeedButton; SpeedButton61: TSpeedButton; SpeedButton68: TSpeedButton; SpeedButton69: TSpeedButton; SpeedButton76: TSpeedButton; SpeedButton77: TSpeedButton; SpeedButton78: TSpeedButton; SpeedButton79: TSpeedButton; SpeedButton80: TSpeedButton; SpeedButton81: TSpeedButton; SpeedButton82: TSpeedButton; SpeedButton83: TSpeedButton; CDS_3: TClientDataSet; DS_3: TDataSource; ADOQueryImage: TADOQuery; DataSource2: TDataSource; IdFTP1: TIdFTP; Panel4: TPanel; cxGrid3: TcxGrid; Tv3: TcxGridDBTableView; cxGridDBColumn1: TcxGridDBColumn; v3Column1: TcxGridDBColumn; v3Column4: TcxGridDBColumn; v3Column5: TcxGridDBColumn; cxGridLevel2: TcxGridLevel; Panel3: TPanel; SpeedButton1: TSpeedButton; SpeedButton2: TSpeedButton; SpeedButton3: TSpeedButton; SpeedButton4: TSpeedButton; SpeedButton5: TSpeedButton; SpeedButton6: TSpeedButton; SpeedButton7: TSpeedButton; SpeedButton8: TSpeedButton; SpeedButton9: TSpeedButton; SpeedButton10: TSpeedButton; SpeedButton11: TSpeedButton; SpeedButton12: TSpeedButton; Tv3Column1: TcxGridDBColumn; MovePanel1: TMovePanel; Label17: TLabel; Label18: TLabel; lblLenUnit1: TLabel; CIFBeg: TEdit; Button1: TButton; Button4: TButton; CIFEnd: TEdit; CIFQty: TEdit; RadioGroup1: TRadioGroup; Button2: TButton; Tv3Column3: TcxGridDBColumn; Tv3Column4: TcxGridDBColumn; cxStyle4: TcxStyle; cxPageControl1: TcxPageControl; cxTabSheet1: TcxTabSheet; 查看: TcxTabSheet; cxGrid2: TcxGrid; Tv2: TcxGridDBTableView; tv2CDType: TcxGridDBColumn; tv2CDWZ: TcxGridDBColumn; v2Column2: TcxGridDBColumn; Tv2CDQty: TcxGridDBColumn; Tv2CDReason: TcxGridDBColumn; v2Column1: TcxGridDBColumn; v2Column3: TcxGridDBColumn; v2Column4: TcxGridDBColumn; cxGridLevel1: TcxGridLevel; cxGrid1: TcxGrid; TV1: TcxGridDBTableView; cxGridDBColumn2: TcxGridDBColumn; cxGridDBColumn3: TcxGridDBColumn; cxGridDBColumn4: TcxGridDBColumn; cxGridDBColumn5: TcxGridDBColumn; cxGridDBColumn6: TcxGridDBColumn; cxGridDBColumn7: TcxGridDBColumn; cxGridDBColumn8: TcxGridDBColumn; cxGridDBColumn9: TcxGridDBColumn; cxGridLevel3: TcxGridLevel; DS_1: TDataSource; CDS_1: TClientDataSet; lblCIFName: TLabel; Label2: TLabel; Label8: TLabel; CIFNumber: TEdit; Panel9: TPanel; Panel2: TPanel; lblLenUnit: TLabel; Label5: TLabel; InputLen: TEdit; BTPrint: TButton; Button6: TButton; Button8: TButton; ToolBar2: TToolBar; ToolButton3: TToolButton; ToolButton5: TToolButton; ToolButton6: TToolButton; GPM_3: TcxGridPopupMenu; Panel6: TPanel; Label35: TLabel; Label16: TLabel; Label26: TLabel; edtChen: TEdit; edtMaBiao: TEdit; ComboBox1: TComboBox; Edit6: TEdit; Label6: TLabel; Panel10: TPanel; Label14: TLabel; Label23: TLabel; Label24: TLabel; Label25: TLabel; Label1: TLabel; PCId: TEdit; Loom: TEdit; Repairer: TEdit; CodeName: TEdit; edtScan: TEdit; Button3: TButton; ToolButton4: TToolButton; ToolButton7: TToolButton; ToolButton8: TToolButton; Label7: TLabel; edtMBDW: TEdit; Label9: TLabel; MinLen: TEdit; Label15: TLabel; MinWeight: TEdit; MaxLen: TEdit; MaxWeight: TEdit; Label19: TLabel; MPlace: TEdit; Label20: TLabel; Label21: TLabel; YPlace: TEdit; Label27: TLabel; KgPlace: TEdit; Label28: TLabel; Label33: TLabel; Label13: TLabel; BatchNo: TEdit; Label22: TLabel; Grade: TComboBox; Label10: TLabel; C_ColorDepth: TComboBox; Label12: TLabel; Label34: TLabel; Label49: TLabel; WorkShift: TComboBox; SCPerson: TcxButtonEdit; JBSCPerson: TcxButtonEdit; Label36: TLabel; OutPutQty1: TEdit; Label38: TLabel; OutPutQty2: TEdit; Label4: TLabel; Label11: TLabel; InputWeight: TEdit; Tare: TEdit; Label3: TLabel; lblRuleConversion: TLabel; Coefficient: TEdit; procedure FormDestroy(Sender: TObject); procedure FormClose(Sender: TObject; var Action: TCloseAction); procedure FormShow(Sender: TObject); procedure BTPrintClick(Sender: TObject); procedure SpeedButton1Click(Sender: TObject); procedure SpeedButton12Click(Sender: TObject); procedure SpeedButton13Click(Sender: TObject); procedure Button1Click(Sender: TObject); procedure edtScanKeyPress(Sender: TObject; var Key: Char); procedure CIFBegClick(Sender: TObject); procedure CIFEndChange(Sender: TObject); procedure Edit6Click(Sender: TObject); procedure MJstr3KeyPress(Sender: TObject; var Key: Char); procedure Button2Click(Sender: TObject); procedure edtScanClick(Sender: TObject); procedure NetWeightKeyPress(Sender: TObject; var Key: Char); procedure FormCreate(Sender: TObject); procedure Button4Click(Sender: TObject); procedure edtChenClick(Sender: TObject); procedure Button6Click(Sender: TObject); procedure Button8Click(Sender: TObject); procedure Tv3MouseDown(Sender: TObject; Button: TMouseButton; Shift: TShiftState; X, Y: Integer); procedure edtYJClick(Sender: TObject); procedure Pic_Image1DblClick(Sender: TObject); procedure Tv3CustomDrawCell(Sender: TcxCustomGridTableView; ACanvas: TcxCanvas; AViewInfo: TcxGridTableDataCellViewInfo; var ADone: Boolean); procedure lblLenUnitClick(Sender: TObject); procedure ToolButton3Click(Sender: TObject); procedure ToolButton6Click(Sender: TObject); procedure ToolButton5Click(Sender: TObject); procedure Button3Click(Sender: TObject); procedure ToolButton4Click(Sender: TObject); procedure ToolButton7Click(Sender: TObject); procedure ToolButton8Click(Sender: TObject); procedure ComboBox1Change(Sender: TObject); procedure MinLenExit(Sender: TObject); procedure cxButtonEdit1PropertiesButtonClick(Sender: TObject; AButtonIndex: Integer); procedure JBSCPersonPropertiesButtonClick(Sender: TObject; AButtonIndex: Integer); private { Private declarations } FCIID, FOperationStatus, FCIFName, FWorkshop: string; FOrderNo, FMainId, FSubId, FPCId, FConNo, FConMId, FConSId: string; FLoom, FBatchNO, FLenUnit, FC_Code, FC_Name, FC_Spec, FC_Width, FC_GramWeight: string; FC_Color, FC_ColorNo, FC_StyleNo, FC_Pattern, FC_CustPattern, FC_ColorDepth: string; FFtyPCId, FGangNo: string; FPieceNo: Integer; IsCommopen: boolean; procedure SetINIFile(); //设置配置文件 procedure GetINIFile(); //设置长度单位 procedure SetUnit(MUnit: string); //设置长度单位 procedure SetDdetails(); //刷新详细信息 procedure InitCDPanel(); //刷新疵点选项 procedure InitCDGrid(MCIID: string); //刷新疵点登记信息 procedure InitCDGridCX(MCIID: string); //刷新疵点查询信息 procedure InitJYGrid(); //刷新检验信息 function CheckData(CKType: string): Boolean; //校验数据 function SaveData(): Boolean; //保存数据 procedure InitLCK(MPCId: string); //扫描流程卡 procedure InitJTM(MCIID: string); //扫描卷条码 procedure ClearGlobal(); //清除全局ID procedure PrtData(MCIID: string); //打印卷标签 procedure QuantityConversion(); //数量换算 procedure InitImage(YFTPName: string); //图片 procedure InitImageHX(HXSID: string); procedure LookImage(FileName: string); procedure OpenCom(DllName: string); //打开串口 procedure CloseCom(DllName: string); //关闭串口 procedure On1201(var Message: Tmessage); message 1201; //电子称 procedure On1301(var Message: Tmessage); message 1301; //码表 public fmanage: string; fFlileFlag: string; { Public declarations } end; var frmTatMachInsp: TfrmTatMachInsp; newh, newh1: hwnd; implementation uses U_DataLink, U_RTFun, U_ZDYHelp, U_iniParam, U_EmployeeSel; {$R *.dfm} procedure TfrmTatMachInsp.SetINIFile(); begin if edtChen.Text = '√' then IsDZCDYDll := '1' else IsDZCDYDll := '0'; if edtMaBiao.Text = '√' then IsMBDYDll := '1' else IsMBDYDll := '0'; if edtMBDW.Text = '√' then IsMBDYDllUnit := '1' else IsMBDYDllUnit := '0'; LabQty := ComboBox1.Text; FMinLen := MinLen.Text; FMaxLen := MaxLen.Text; FMinWeight := MinWeight.Text; FMaxWeight := MaxWeight.Text; FMPlace := MPlace.Text; FYPlace := YPlace.Text; FKgPlace := KgPlace.Text; WriteINIFile(); end; procedure TfrmTatMachInsp.GetINIFile(); begin if IsDZCDYDll = '1' then edtChen.Text := '√' else edtChen.Text := ''; if IsMBDYDll = '1' then edtMaBiao.Text := '√' else edtMaBiao.Text := ''; if IsMBDYDllUnit = '1' then edtMBDW.Text := '√' else edtMBDW.Text := ''; ComboBox1.ItemIndex := ComboBox1.Items.IndexOf(trim(LabQty)); MinLen.Text := FMinLen; MaxLen.Text := FMaxLen; MinWeight.Text := FMinWeight; MaxWeight.Text := FMaxWeight; MPlace.Text := FMPlace; YPlace.Text := FYPlace; KgPlace.Text := FKgPlace; end; procedure TfrmTatMachInsp.SetDdetails(); begin AOrdDefNote1.Text := ''; AOrdDefNote1.Text := AOrdDefNote1.Text + '卡号:' + FPCId + #13; AOrdDefNote1.Text := AOrdDefNote1.Text + '品名:' + FC_Name + #13; AOrdDefNote1.Text := AOrdDefNote1.Text + '颜色:' + FC_Color + #13; AOrdDefNote1.Text := AOrdDefNote1.Text + '色号:' + FC_ColorNo + #13; end; procedure TfrmTatMachInsp.SetUnit(MUnit: string); begin lblLenUnit.Caption := MUnit; lblLenUnit1.Caption := MUnit; end; procedure TfrmTatMachInsp.InitImage(YFTPName: string); begin // with ADOQueryImage do // begin // close; // sql.Clear; // sql.Add('select * from TC_File A'); // sql.Add('where isnull(WBID,'''')<>'''' and WBID=' + quotedstr(YFTPName)); //// showmessage(sql.text); // open; // end; end; procedure TfrmTatMachInsp.InitImageHX(HXSID: string); begin // with Qry_ImgHX do // begin // close; // sql.Clear; // sql.Add('select * from TC_File A'); // sql.Add('where isnull(WBID,'''')<>'''' and WBID=' + quotedstr(HXSID)); //// ShowMessage(SQL.Text); // open; // end; end; procedure TfrmTatMachInsp.QuantityConversion(); begin if lblRuleConversion.Caption = '米转公斤' then begin InputWeight.Text := floattostr(StrToFloatdef(trim(InputLen.Text), 0) * StrToFloatdef(trim(Coefficient.Text), 0)); end; if lblRuleConversion.Caption = '公斤转米' then begin InputLen.Text := floattostr(StrToFloatdef(trim(InputWeight.Text), 0) * StrToFloatdef(trim(Coefficient.Text), 0)); end; end; function TfrmTatMachInsp.CheckData(CKType: string): Boolean; var mvalue: Double; begin try if Trim(FPCId) = '' then raise Exception.Create('请扫描流程卡！'); if Trim(CKType) = '提交' then begin // if trim(FLenUnit) = 'M' then // if trim(lblLenUnit.Caption) <> 'M' then // raise Exception.Create('合同打卷单位为M,请输入米数！'); // if trim(FLenUnit) = 'Y' then // if trim(lblLenUnit.Caption) <> 'Y' then // raise Exception.Create('合同打卷单位为Y,请输入码数！'); if trim(lblLenUnit.Caption) = '' then raise Exception.Create('长度单位不能为空!'); if Trim(InputWeight.Text) <> '' then begin if TryStrToFloat(InputWeight.Text, mvalue) = False then raise Exception.Create('重量录入错误!'); if strtofloatdef(trim(InputWeight.Text), 0) < Strtofloatdef(MinWeight.Text, 0) then raise Exception.Create('重量不能小于' + MinWeight.Text + '!'); if strtofloatdef(trim(InputWeight.Text), 0) > Strtofloatdef(MaxWeight.Text, 0) then raise Exception.Create('重量不能大于' + MaxWeight.Text + '!'); end; if Trim(InputLen.Text) <> '' then begin if TryStrToFloat(InputLen.Text, mvalue) = False then raise Exception.Create('长度录入错误!'); if strtofloatdef(trim(InputLen.Text), 0) < Strtofloatdef(MinLen.Text, 0) then raise Exception.Create('长度不能小于' + MinLen.Text + '米!'); if strtofloatdef(trim(InputLen.Text), 0) > Strtofloatdef(MaxLen.Text, 0) then raise Exception.Create('长度不能大于' + MaxLen.Text + '米!'); end; if (strtofloatdef(trim(InputLen.Text), 0) = 0) and (strtofloatdef(trim(InputWeight.Text), 0) = 0) then raise Exception.Create('长度和重量不能都为0!!'); end; Result := True; except Result := false; application.MessageBox(PChar(Exception(ExceptObject).Message), '提示信息', 0); end; end; procedure TfrmTatMachInsp.ClearGlobal(); begin FOrderNo := ''; FConNo := ''; FConMId := ''; FConSId := ''; FMainId := ''; FSubId := ''; FPCId := ''; FC_CustPattern := ''; FC_ColorDepth := ''; FFtyPCId := ''; FGangNo := ''; FC_Code := ''; FC_Name := ''; FBatchNO := ''; FC_Spec := ''; FC_Color := ''; FC_ColorNo := ''; FC_StyleNo := ''; FC_Width := ''; FC_GramWeight := ''; FC_Pattern := ''; FCIID := ''; FWorkshop := ''; InputLen.Text := ''; Coefficient.Text := ''; AOrdDefNote1.Text := ''; Tare.Text := ''; InputWeight.Text := ''; FLenUnit := ''; FLoom := ''; end; procedure TfrmTatMachInsp.LookImage(FileName: string); var sFieldName: string; begin sFieldName := leftbstr(ExtractFilePath(Application.ExeName), 1) + ':\图片查看'; if not DirectoryExists(pchar(sFieldName)) then CreateDirectory(pchar(sFieldName), nil); sFieldName := sFieldName + '\' + trim(FileName); try IdFTP1.Host := ReadINIFileStr('SYSTEMSET.INI', 'SERVER', '服务器地址', '127.0.0.1'); IdFTP1.Username := 'three'; IdFTP1.Password := '641010'; IdFTP1.Connect(); except ; end; if IdFTP1.Connected then begin try IdFTP1.Get(fFlileFlag + '\' + Trim(FileName), sFieldName, true, false); except Application.MessageBox('客户图样文件不存在', '提示', MB_ICONWARNING); IdFTP1.Quit; Exit; end; end else begin Application.MessageBox('无法连接文件服务器', '提示', MB_ICONWARNING); IdFTP1.Quit; Exit; end; if IdFTP1.Connected then IdFTP1.Quit; ShellExecute(Handle, 'open', PChar(sFieldName), '', '', SW_SHOWNORMAL); end; procedure TfrmTatMachInsp.Pic_Image1DblClick(Sender: TObject); begin if TcxDBImage(Sender).Picture.Height = 0 then exit; LookImage(ADOQueryImage.fieldbyname(TcxDBImage(Sender).Hint).asstring); end; procedure TfrmTatMachInsp.InitLCK(MPCId: string); begin with ADOTmp do begin Close; sql.Clear; sql.Add('EXEC P_Tat_Insp_Get_PlanCard @PCID=''' + Trim(MPCId) + ''''); Open; end; if ADOTmp.IsEmpty = False then begin // if Trim(ADOTmp.fieldbyname('Status').AsString) <> '9' then // begin // application.MessageBox('流程卡不在已审核状态！', '提示信息', MB_ICONERROR); // ClearGlobal(); // end // else begin // InitImage(Trim(ADOTmp.fieldbyname('YFTPName').AsString)); // InitImageHX(Trim(ADOTmp.fieldbyname('HXSID').AsString)); // FLenUnit := Trim(ADOTmp.fieldbyname('LenUnit').AsString); // SetUnit(FLenUnit); FConNo := Trim(ADOTmp.fieldbyname('ConNo').AsString); FOrderNo := Trim(ADOTmp.fieldbyname('OrderNo').AsString); FMainId := Trim(ADOTmp.fieldbyname('MainId').AsString); FSubId := Trim(ADOTmp.fieldbyname('SubId').AsString); FPCId := Trim(ADOTmp.fieldbyname('PCId').AsString); // FC_ColorDepth := Trim(ADOTmp.fieldbyname('C_ColorDepth').AsString); FWorkshop := Trim(ADOTmp.fieldbyname('Workshop').AsString); FC_Code := Trim(ADOTmp.fieldbyname('C_Code').AsString); FC_Name := Trim(ADOTmp.fieldbyname('C_Name').AsString); FC_Spec := Trim(ADOTmp.fieldbyname('C_Spec').AsString); FC_Color := Trim(ADOTmp.fieldbyname('C_Color').AsString); FC_ColorNo := Trim(ADOTmp.fieldbyname('C_ColorNo').AsString); FC_Width := Trim(ADOTmp.fieldbyname('C_Width').AsString); FC_GramWeight := Trim(ADOTmp.fieldbyname('C_GramWeight').AsString); FC_Pattern := Trim(ADOTmp.fieldbyname('C_Pattern').AsString); FLoom := Trim(ADOTmp.fieldbyname('Loom').AsString); FBatchNO := Trim(ADOTmp.fieldbyname('BatchNO').AsString); // PieceNo.Text := Trim(ADOTmp.fieldbyname('maxRoll').AsString); Coefficient.Text := '0'; CodeName.Text := FC_Name; BatchNO.Text := FBatchNO; Loom.Text := FLoom; PCId.Text := FPCId; Repairer.Text := Trim(ADOTmp.fieldbyname('Repairer').AsString); SetDdetails(); InputLen.SetFocus; CIFBegClick(InputLen); end; end else begin application.MessageBox('流程卡不存在！', '提示信息', MB_ICONERROR); ClearGlobal(); end; InitJYGrid(); InitCDGrid(FCIID); edtScan.Text := ''; end; procedure TfrmTatMachInsp.JBSCPersonPropertiesButtonClick(Sender: TObject; AButtonIndex: Integer); begin try frmEmployeeSel := TfrmEmployeeSel.Create(self); with frmEmployeeSel do begin FPost := '挡车工'; if ShowModal = 1 then begin JBSCPerson.Text := frmEmployeeSel.FRName; JBSCPerson.Hint := frmEmployeeSel.FRCode; end; end; finally frmEmployeeSel.Free; end; end; procedure TfrmTatMachInsp.InitJTM(MCIID: string); begin with ADOTmp do begin Close; sql.Clear; sql.Add('select * from Tat_Cloth_IO where StkId=''' + Trim(MCIID) + ''' and IOFlag=''入库'''); Open; end; if not ADOTmp.IsEmpty then begin Application.MessageBox('已产生入库数据不能操作!', '提示', 0); Exit; end; with ADOTmp do begin Close; sql.Clear; sql.Add('select * from Tat_Cloth_IO where StkId=''' + Trim(MCIID) + ''' and IOFlag=''出库'''); Open; end; if not ADOTmp.IsEmpty then begin Application.MessageBox('已产生出库数据不能操作!', '提示', 0); Exit; end; with ADOTmp do begin Close; sql.Clear; sql.Add('select * from Tat_Cloth_Inspect where CIID=''' + Trim(MCIID) + ''''); Open; end; if not ADOTmp.IsEmpty then begin FOperationStatus := '卷条码'; FCIID := MCIID; InitCDGrid(MCIID); end; end; procedure TfrmTatMachInsp.CloseCom(DllName: string); type TMyFunc = function(sCommName: PAnsiChar): HWND; stdcall; var Tf1: TMyFunc; Tp1: TFarProc; Th1: Thandle; begin Th1 := LoadLibrary(Pchar(trim(DllName))); if Th1 > 0 then begin try Tp1 := GetProcAddress(Th1, 'CommClose'); if Tp1 <> nil then begin Tf1 := TMyFunc(Tp1); newh1 := Tf1('Comm1'); end else begin end; finally // FreeLibrary(Th1); end; end else begin application.MessageBox(Pchar('找不到 ' + trim(DllName) + ' 文件！'), '提示'); end; end; procedure TfrmTatMachInsp.ComboBox1Change(Sender: TObject); begin SetINIFile(); end; procedure TfrmTatMachInsp.OpenCom(DllName: string); type TMyFunc = function(fhandle: hwnd; sCommName: PAnsiChar; IntTime: integer; IsMessage: integer): HWND; stdcall; var Tf: TMyFunc; Tp: TFarProc; Th: Thandle; begin // closeCom(FComFile); Th := LoadLibrary(Pchar(trim(DllName))); if Th > 0 then begin try Tp := GetProcAddress(Th, 'CommOpen'); if Tp <> nil then begin Tf := TMyFunc(Tp); newh := Tf(self.Handle, 'Comm1', 500, 1); if newh < 1 then begin application.MessageBox(Pchar('打开串口失败！'), '提示'); end else IsCommOpen := true; end else begin IsCommOpen := false; end; finally // FreeLibrary(Th); end; end else begin IsCommOpen := false; application.MessageBox(Pchar('找不到 ' + trim(DllName) + ' 文件！'), '提示'); end; end; procedure TfrmTatMachInsp.FormDestroy(Sender: TObject); begin inherited; frmTatMachInsp := nil; end; procedure TfrmTatMachInsp.On1301(var Message: Tmessage); var i1, i2: integer; unitname: string; fdata: double; begin i1 := Message.WParam; i2 := Message.LParam; if (trim(edtMaBiao.Text) = '√') then begin InputLen.Text := format('%.2f', [i1 / 100000]); end; if (trim(edtMBDW.Text) = '√') then begin if i2 = 0 then begin SetUnit('M'); end else begin SetUnit('Y'); end; end; end; procedure TfrmTatMachInsp.On1201(var Message: Tmessage); var i1, i2: integer; unitname: string; fdata: double; begin i1 := Message.WParam; i2 := Message.LParam; if trim(edtChen.Text) = '√' then begin InputWeight.Text := format('%.2f', [i1 / 100000]); end; end; procedure TfrmTatMachInsp.FormClose(Sender: TObject; var Action: TCloseAction); begin inherited; if isCommopen then begin closeCom(DZCDYDllName); closeCom(MBDYDllName); end; Action := caFree; end; procedure TfrmTatMachInsp.InitCDGrid(MCIID: string); begin cxPageControl1.ActivePageIndex := 0; with ADOTmp do begin Close; SQL.Clear; sql.Add('select * from Tat_Cloth_Inspect_Flaw where CIID=' + quotedstr(Trim(MCIID))); Open; end; SCreateCDS(ADOTmp, CDS_2); SInitCDSData(ADOTmp, CDS_2); end; procedure TfrmTatMachInsp.InitCDGridCX(MCIID: string); begin cxPageControl1.ActivePageIndex := 1; with ADOTmp do begin Close; SQL.Clear; sql.Add('select * from Tat_Cloth_Inspect_Flaw where CIID=' + quotedstr(Trim(MCIID))); Open; end; SCreateCDS(ADOTmp, CDS_1); SInitCDSData(ADOTmp, CDS_1); end; procedure TfrmTatMachInsp.InitJYGrid(); var MNetWeight, MJYLen: double; begin with ADOQueryMain do begin Close; SQL.Clear; sql.Add('select A.*'); sql.Add('from Tat_Cloth_Inspect A where PCId=''' + Trim(FPCId) + ''''); // sql.Add('and convert(varchar(10),filltime,120)=convert(varchar(10),getdate(),120)'); sql.Add('order by filltime desc'); // ShowMessage(SQL.Text); Open; end; SCreateCDS(ADOQueryMain, CDS_3); SInitCDSData(ADOQueryMain, CDS_3); end; procedure TfrmTatMachInsp.FormShow(Sender: TObject); begin inherited; ReadCxGrid(trim(Self.Caption) + 'Tv1', Tv1, '贸易检验管理'); ReadCxGrid(trim(Self.Caption) + 'Tv2', Tv2, '贸易检验管理'); ReadCxGrid(trim(Self.Caption) + 'Tv3', Tv3, '贸易检验管理'); fFlileFlag := UserDataFlag + 'HX'; InitCDPanel(); InitCDGrid(FCIID); if IsINIFile() then ReadINIFile() else WriteINIFile; GetINIFile(); if trim(fmanage) <> '高权限' then begin if trim(DZCDYDllName) <> '' then OpenCom(DZCDYDllName); if trim(MBDYDllName) <> '' then OpenCom(MBDYDllName); edtScan.SetFocus; end; end; procedure TfrmTatMachInsp.InitCDPanel(); var AA: array[0..100] of string; i, j: Integer; begin with ADOTmp do begin Close; sql.Clear; sql.Add('select ZDYName from KH_Zdy where Type=''WFBCD''and MainType=''梭织'' order by ZDYNO '); Open; end; if ADOTmp.IsEmpty then begin Application.MessageBox('没有定义疵点！', '提示', 0); Exit; end; with ADOTmp do begin First; i := 0; while not Eof do begin AA[i] := Trim(fieldbyname('ZDYName').AsString); i := i + 1; Next; end; end; i := i - 1; if i > 69 then begin i := 69; end; for j := 0 to i do begin with ScrollBox1 do begin TSpeedButton(Controls[j]).Visible := True; TSpeedButton(Controls[j]).Hint := AA[j]; if Length(AA[j]) > 4 then begin TSpeedButton(Controls[j]).Caption := Copy(Trim(AA[j]), 1, 4) + #13 + Copy(Trim(AA[j]), 5, Length(AA[j]) - 4); end else TSpeedButton(Controls[j]).Caption := AA[j]; end; end; end; procedure TfrmTatMachInsp.Tv3CustomDrawCell(Sender: TcxCustomGridTableView; ACanvas: TcxCanvas; AViewInfo: TcxGridTableDataCellViewInfo; var ADone: Boolean); begin if AViewInfo.GridRecord.Values[TcxGridDBTableView(Sender).GetColumnByFieldName('Grade').Index] = '次品' then ACanvas.Brush.Color := clRed; end; procedure TfrmTatMachInsp.Tv3MouseDown(Sender: TObject; Button: TMouseButton; Shift: TShiftState; X, Y: Integer); begin if CDS_3.isEmpty then exit; InitCDGridCX(CDS_3.FieldByName('CIID').AsString); end; function TfrmTatMachInsp.SaveData(): Boolean; var maxno, MCIID, strsql: string; MInputLen, MMeter, MYardage: Double; MInputWeight, MGrossWeight, MNetWeight, MTare: Double; begin if FOperationStatus = '卷条码' then begin MCIID := FCIID; end else begin MCIID := ''; end; try ADOCmd.Connection.BeginTrans; ///保存主表 with ADOCmd do begin Close; sql.Clear; SQL.Add('select * from Tat_Cloth_Inspect where CIID=''' + Trim(MCIID) + ''''); Open; end; with ADOCmd do begin if Trim(MCIID) = '' then begin if not GetLSNo(ADOTmp, maxno, 'T' + Trim(SCXFlag), 'Tat_Cloth_Inspect', 4, 1) then raise Exception.Create('获取条码失败！'); Append; FieldByName('Filler').Value := Trim(DName); FieldByName('CIID').Value := Trim(maxno); end else begin maxno := Trim(MCIID); Edit; FieldByName('Editer').Value := Trim(DName); FieldByName('EditTime').Value := SGetServerDateTime(ADOTmp); end; ///////////////////////// 保存重量 ///////////////////////// MTare := StrToFloatdef(trim(Tare.Text), 0); MInputWeight := RoundFloat(StrToFloatdef(trim(InputWeight.Text), 0), StrTointdef(KgPlace.Text, 0)); MGrossWeight := MInputWeight + MTare; //毛重 MNetWeight := MInputWeight; //净重 FieldByName('InputWeight').Value := MInputWeight; FieldByName('GrossWeight').Value := MGrossWeight; FieldByName('NetWeight').Value := MNetWeight; FieldByName('Tare').Value := MTare; ///////////////////////// 保存重量 ///////////////////////// /// ///////////////////////// 保存长度 ///////////////////////// MInputLen := RoundFloat(StrToFloatdef(trim(InputLen.Text), 0), 2); if lblLenUnit.Caption = 'M' then begin MMeter := RoundFloat(StrToFloatdef(trim(InputLen.Text), 0), StrTointdef(MPlace.Text, 0)); MYardage := RoundFloat(MMeter / 0.9144, StrTointdef(YPlace.Text, 0)); end else begin MYardage := RoundFloat((StrToFloatdef(trim(InputLen.Text), 0)), StrTointdef(YPlace.Text, 0)); MMeter := RoundFloat(MYardage * 0.9144, StrTointdef(MPlace.Text, 0)); end; FieldByName('InputLen').Value := RoundFloat(StrToFloatdef(trim(InputLen.Text), 0), 2); FieldByName('Meter').Value := MMeter; FieldByName('Yardage').Value := MYardage; FieldByName('LenUnit').Value := TRIM(lblLenUnit.Caption); ///////////////////////// 保存长度 ///////////////////////// FieldByName('Coefficient').Value := StrToFloatdef(Coefficient.text, 0); FieldByName('Grade').Value := Grade.text; FieldByName('PieceNo').Value := 0; FieldByName('OrderNo').value := Trim(FOrderNo); FieldByName('MainId').value := Trim(FMainId); FieldByName('SubId').value := Trim(FSubId); FieldByName('ConNo').value := Trim(FConNo); FieldByName('ConMId').value := Trim(FConMId); FieldByName('ConSId').value := Trim(FConSId); FieldByName('Workshop').value := Trim(FWorkshop); FieldByName('CIIOFlag').Value := '未入库'; FieldByName('PCId').value := FPCId; FieldByName('C_Code').value := FC_Code; FieldByName('C_Name').value := FC_Name; FieldByName('BatchNO').value := FBatchNO; FieldByName('Loom').value := FLoom; FieldByName('C_Spec').value := FC_Spec; FieldByName('C_Color').value := FC_Color; FieldByName('C_ColorNo').value := FC_ColorNo; FieldByName('C_StyleNo').value := FC_StyleNo; FieldByName('C_Width').value := FC_Width; FieldByName('C_GramWeight').value := FC_GramWeight; FieldByName('C_Pattern').value := FC_Pattern; FieldByName('C_CustPattern').value := FC_CustPattern; FieldByName('C_ColorDepth').value := C_ColorDepth.Text; FieldByName('CIMachNo').Value := Trim(SCXFlag); Post; end; MCIID := Trim(maxno); //卷条码 FCIID := Trim(maxno); //保存挡车工信息 with ADOCmd do begin Close; sql.Clear; sql.Add('delete Tat_Cloth_knitter where CIID=' + quotedstr(maxno)); sql.Add('insert into Tat_Cloth_knitter(CIID,CKID,knittid,knitter,OutPutQty)'); sql.Add('values(' + quotedstr(maxno) + ',' + quotedstr(maxno + '1') + ',' + quotedstr(SCPerson.Hint) + ',' + quotedstr(SCPerson.Text) + ',' + quotedstr(IntToStr(StrtoIntdef(OutPutQty1.Text, 0))) + ')'); sql.Add('insert into Tat_Cloth_knitter(CIID,CKID,knittid,knitter,OutPutQty)'); sql.Add('values(' + quotedstr(maxno) + ',' + quotedstr(maxno + '2') + ',' + quotedstr(JBSCPerson.Hint) + ',' + quotedstr(JBSCPerson.Text) + ',' + quotedstr(IntToStr(StrtoIntdef(OutPutQty2.Text, 0))) + ')'); execsql; end; ////////////////// 保存疵点信息 ////////////////// with CDS_2 do begin First; while not Eof do begin if Trim(CDS_2.fieldbyname('CIFID').AsString) = '' then begin if not GetLSNo(ADOTmp, maxno, 'JC', 'Tat_Cloth_Inspect_Flaw', 5, 1) then raise Exception.Create('获取疵点失败！'); end else begin maxno := Trim(CDS_2.fieldbyname('CIFID').AsString); end; with ADOCmd do begin Close; SQL.Clear; sql.Add('select * from Tat_Cloth_Inspect_Flaw '); sql.Add(' where CIFID=''' + Trim(maxno) + ''''); Open; end; with ADOCmd do begin if Trim(CDS_2.fieldbyname('CIFID').AsString) = '' then Append else Edit; RTSetSaveDataCDS(ADOCmd, Tv2, CDS_2, 'Tat_Cloth_Inspect_Flaw', 0); FieldByName('CIID').Value := Trim(MCIID); FieldByName('CIFID').Value := Trim(maxno); Post; end; CDS_2.Edit; CDS_2.FieldByName('CIID').Value := Trim(MCIID); CDS_2.FieldByName('CIFID').Value := Trim(maxno); Next; end; end; ////////////////// 保存疵点信息 ////////////////// /// ////////////////// 更新卷号疵点信息 ////////////////// with ADOCmd do begin Close; sql.Clear; sql.Add('exec P_Tat_Insp_Up @CIID=''' + trim(MCIID) + ''''); if FOperationStatus = '布票' then sql.Add(',@InspType=' + QuotedStr('布票')) else sql.Add(',@InspType=' + QuotedStr('单卷修改')); execsql; end; ////////////////// 更新卷号疵点信息 ////////////////// ////////////////// 更新进度 ////////////////// with ADOCmd do begin Close; sql.Clear; sql.Add('insert into Tat_Need_Up(UType,UDataId) values(''机台检验'',' + quotedstr(maxno) + ') '); execsql; end; ////////////////// 更新进度 ////////////////// /// ADOCmd.Connection.CommitTrans; ////////////////// 出入库及库存 ////////////////// with ADOCmd do begin Close; sql.Clear; sql.Add('exec P_Tat_Insp_In_Stk @CIID=''' + trim(MCIID) + ''''); Open; end; if ADOCmd.FieldByName('intReturn').AsInteger = -1 then begin application.MessageBox(PChar(trim(ADOCmd.FieldByName('ShowMsg').AsString)), '提示信息', 0); Result := False; end else begin Result := True; end; ////////////////// 出入库及库存 ////////////////// Result := True; except ADOCmd.Connection.RollbackTrans; application.MessageBox(PChar(Exception(ExceptObject).Message), '提示信息', 0); Result := False; end; end; procedure TfrmTatMachInsp.BTPrintClick(Sender: TObject); var fPrintFile: string; mvalue: Double; i: Integer; begin edtScan.SetFocus; if CheckData('提交') = False then exit; if SaveData() then begin InputLen.Text := ''; InputWeight.Text := ''; if Trim(Edit6.Text) = '√' then begin PrtData(FCIID); end; end; InputLen.SetFocus; CIFBegClick(InputLen); FOperationStatus := '布票'; InitJYGrid(); InitCDGrid(''); FCIID := ''; SCPerson.Text := ''; JBSCPerson.Text := ''; OutPutQty1.Text := ''; OutPutQty2.Text := ''; end; procedure TfrmTatMachInsp.PrtData(MCIID: string); var fPrintFile, FLBName: string; begin with ADOQueryPrint do begin Close; SQL.Clear; sql.Add(' EXEC P_Tat_Insp_Prt_Lab '); SQL.Add(' @CIID=''' + Trim(MCIID) + ''''); Open; end; if ADOQueryPrint.IsEmpty then begin application.MessageBox('标签内容未找到！', '提示信息', MB_ICONERROR); exit; end; FLBName := Trim(ADOQueryPrint.fieldbyname('LBName').AsString); ExportFtErpFile(FLBName + '.rmf', ADOTmp); fPrintFile := ExtractFilePath(Application.ExeName) + 'Report\' + FLBName + '.rmf'; if FileExists(fPrintFile) then begin RM1.LoadFromFile(fPrintFile); RM1.DefaultCopies := strtointdef(trim(ComboBox1.Text), 1); RM1.PrintReport; end else begin Application.MessageBox(PChar('没有找' + fPrintFile), '提示', 0); end; end; procedure TfrmTatMachInsp.SpeedButton1Click(Sender: TObject); var fsj: string; begin fsj := Trim(TSpeedButton(Sender).Hint); if Trim(fsj) = '' then Exit; if TEdit(FindComponent(Trim(TSpeedButton(Sender).Hint))).Name = 'KuangHao' then Exit; fsj := Trim(TEdit(FindComponent(Trim(TSpeedButton(Sender).Hint))).Text); TEdit(FindComponent(Trim(TSpeedButton(Sender).Hint))).Text := fsj + Trim(TSpeedButton(Sender).Caption); TEdit(FindComponent(Trim(TSpeedButton(Sender).Hint))).SelectAll; end; procedure TfrmTatMachInsp.SpeedButton12Click(Sender: TObject); var fsj: string; begin fsj := Trim(TEdit(FindComponent(Trim(TSpeedButton(Sender).Hint))).Text); if Trim(fsj) = '' then Exit; TEdit(FindComponent(Trim(TSpeedButton(Sender).Hint))).Text := Copy(fsj, 1, Length(fsj) - 1); TEdit(FindComponent(Trim(TSpeedButton(Sender).Hint))).SelectAll; end; procedure TfrmTatMachInsp.SpeedButton13Click(Sender: TObject); var i: Integer; begin if CheckData('疵点') = False then exit; FCIFName := Trim(TSpeedButton(Sender).Hint); MovePanel1.Visible := True; lblCIFName.Caption := Trim(FCIFName); //显示数字键盘 CIFBeg.Text := InputLen.Text; with Panel3 do begin for i := 0 to ControlCount - 1 do begin if Controls[i] is TSpeedButton then begin TSpeedButton(Controls[i]).Hint := Trim(CIFBeg.Name); end; end; end; end; procedure TfrmTatMachInsp.cxButtonEdit1PropertiesButtonClick(Sender: TObject; AButtonIndex: Integer); begin try frmEmployeeSel := TfrmEmployeeSel.Create(self); with frmEmployeeSel do begin FPost := '挡车工'; if ShowModal = 1 then begin SCPerson.Text := frmEmployeeSel.FRName; SCPerson.Hint := frmEmployeeSel.FRCode; end; end; finally frmEmployeeSel.Free; end; end; procedure TfrmTatMachInsp.Button1Click(Sender: TObject); var mvalue: Double; begin if Trim(CIFBeg.Text) <> '' then begin if Trim(CIFEnd.Text) <> '' then begin if StrToFloat(CIFEnd.Text) < StrToFloat(CIFBeg.Text) then begin Application.MessageBox('疵点位置录入错误!', '提示', 0); Exit; end; end; end; if CIFQty.Text <> '' then begin if TryStrToFloat(CIFQty.Text, mvalue) = False then begin Application.MessageBox('非法数字!', '提示', 0); Exit; end; end; with CDS_2 do begin Append; if RadioGroup1.ItemIndex = 5 then FieldByName('CIFName').Value := '连续性' + Trim(FCIFName) else if RadioGroup1.ItemIndex = 4 then FieldByName('CIFName').Value := '整匹' + Trim(FCIFName) else FieldByName('CIFName').Value := Trim(FCIFName); FieldByName('CIFbeg').Value := Trim(CIFBeg.Text); FieldByName('CIFEnd').Value := Trim(CIFEnd.Text); FieldByName('CIFPoints').Value := 0; if RadioGroup1.ItemIndex > -1 then begin if RadioGroup1.ItemIndex < 3 then begin FieldByName('CIFPoints').Value := RadioGroup1.ItemIndex + 1; end else begin FieldByName('CIFPoints').Value := 4; end; end; FieldByName('CIFQty').Value := StrToFloatdef(trim(CIFQty.Text), 0); Post; end; CIFBeg.Text := ''; CIFEnd.Text := ''; CIFQty.Text := ''; MovePanel1.Visible := False; cxPageControl1.ActivePageIndex := 0; end; procedure TfrmTatMachInsp.edtScanKeyPress(Sender: TObject; var Key: Char); begin if Key = #13 then begin if trim(edtScan.Text) = '' then exit; if trim(edtScan.Text) = FPCId then exit; ClearGlobal(); FOperationStatus := '布票'; InitLCK(edtScan.Text); InitJYGrid(); InputLen.SetFocus; end; end; procedure TfrmTatMachInsp.CIFBegClick(Sender: TObject); var i: Integer; begin with Panel3 do begin for i := 0 to ControlCount - 1 do begin if Controls[i] is TSpeedButton then begin TSpeedButton(Controls[i]).Hint := Trim(TEdit(Sender).Name); end; end; end; end; procedure TfrmTatMachInsp.CIFEndChange(Sender: TObject); var mvalue: Double; begin if Trim(CIFBeg.Text) <> '' then begin if TryStrToFloat(CIFBeg.Text, mvalue) = False then begin Application.MessageBox('非法数字!', '提示', 0); Exit; end; end else begin Exit; end; if Trim(CIFEnd.Text) <> '' then begin if TryStrToFloat(CIFEnd.Text, mvalue) = False then begin Application.MessageBox('非法数字!', '提示', 0); Exit; end; end else begin Exit; end; CIFQty.Text := FloatToStr(StrToFloat(CIFEnd.Text) - StrToFloat(CIFBeg.Text)); end; procedure TfrmTatMachInsp.Edit6Click(Sender: TObject); begin if Trim(Edit6.Text) = '' then begin Edit6.Text := '√'; end else begin Edit6.Text := ''; end; end; procedure TfrmTatMachInsp.MinLenExit(Sender: TObject); begin SetINIFile(); end; procedure TfrmTatMachInsp.MJstr3KeyPress(Sender: TObject; var Key: Char); begin if Key = #13 then begin Key := #0; SelectNext(ActiveControl as TWinControl, True, True); end; end; procedure TfrmTatMachInsp.Button2Click(Sender: TObject); begin RadioGroup1.ItemIndex := -1; end; procedure TfrmTatMachInsp.Button3Click(Sender: TObject); begin if Panel6.Visible then Panel6.Visible := False else Panel6.Visible := True; end; procedure TfrmTatMachInsp.edtScanClick(Sender: TObject); var i: Integer; begin Panel3.Visible := True; with Panel3 do begin for i := 0 to ControlCount - 1 do begin if Controls[i] is TSpeedButton then begin TSpeedButton(Controls[i]).Hint := Trim(TEdit(Sender).Name); end; end; end; end; procedure TfrmTatMachInsp.NetWeightKeyPress(Sender: TObject; var Key: Char); begin if Key = #13 then begin BTPrint.Click; end; end; procedure TfrmTatMachInsp.FormCreate(Sender: TObject); begin inherited; IsCommopen := false; end; procedure TfrmTatMachInsp.lblLenUnitClick(Sender: TObject); begin // if Trim(lblLenUnit.Caption) = 'M' then // SetUnit('Y') // else // SetUnit('M'); end; procedure TfrmTatMachInsp.Button4Click(Sender: TObject); begin MovePanel1.Visible := false; end; procedure TfrmTatMachInsp.ToolButton3Click(Sender: TObject); begin if CDS_3.IsEmpty then Exit; PrtData(CDS_3.fieldbyname('CIID').AsString); end; procedure TfrmTatMachInsp.ToolButton4Click(Sender: TObject); begin try frmZDYHelp := TfrmZDYHelp.Create(Application); with frmZDYHelp do begin MainType := '梭织'; flag := 'WFBCD'; flagname := '疵点'; fnote := True; V1Note.Caption := '英文名称'; if ShowModal = 1 then begin Self.InitCDPanel(); end; end; finally frmZDYHelp.Free; end; end; procedure TfrmTatMachInsp.ToolButton5Click(Sender: TObject); begin if CDS_3.IsEmpty then Exit; if Application.MessageBox('确定要删除数据吗？', '提示', 32 + 4) <> IDYES then Exit; ADOCmd.Connection.BeginTrans; try with ADOCmd do begin Close; sql.Clear; sql.Add('insert into Tat_Need_Up(UType,UDataId) values(''检验删除'',' + quotedstr(Trim(CDS_3.fieldbyname('CIID').AsString)) + ') '); ExecSQL; end; with ADOCmd do begin Close; Sql.Clear; Sql.Add('exec P_Tat_Insp_Del '); Sql.Add('@CIIDS=' + quotedstr(Trim(CDS_3.fieldbyname('CIID').AsString))); Sql.Add(',@DCode=' + Quotedstr(DCode)); Sql.Add(',@DName=' + Quotedstr(DName)); Open; end; if ADOCmd.FieldByName('intReturn').AsInteger = -1 then begin raise Exception.Create(pchar(trim(ADOCmd.FieldByName('ShowMsg').AsString))); end; ADOCmd.Connection.CommitTrans; CDS_3.Delete; application.MessageBox('删除成功！', '提示信息'); except ADOCmd.Connection.RollbackTrans; application.MessageBox(PChar(Exception(ExceptObject).Message), '提示信息', 0); end; end; procedure TfrmTatMachInsp.ToolButton6Click(Sender: TObject); begin if CDS_3.IsEmpty then Exit; with ADOTmp do begin Close; sql.Clear; sql.Add('select * from Tat_Cloth_IO where StkId=''' + Trim(CDS_3.fieldbyname('CIID').AsString) + ''' and IOFlag=''入库'''); Open; end; if not ADOTmp.IsEmpty then begin Application.MessageBox('已产生入库数据不能删除!', '提示', 0); Exit; end; with ADOTmp do begin Close; sql.Clear; sql.Add('select * from Tat_Cloth_IO where StkId=''' + Trim(CDS_3.fieldbyname('CIID').AsString) + ''' and IOFlag=''出库'''); Open; end; if not ADOTmp.IsEmpty then begin Application.MessageBox('已产生出库数据不能删除!', '提示', 0); Exit; end; InitJTM(CDS_3.fieldbyname('CIID').AsString); end; procedure TfrmTatMachInsp.ToolButton7Click(Sender: TObject); begin WriteCxGrid(trim(Self.Caption) + 'Tv1', Tv1, '贸易检验管理'); WriteCxGrid(trim(Self.Caption) + 'Tv2', Tv2, '贸易检验管理'); WriteCxGrid(trim(Self.Caption) + 'Tv3', Tv3, '贸易检验管理'); end; procedure TfrmTatMachInsp.ToolButton8Click(Sender: TObject); begin Close; end; procedure TfrmTatMachInsp.edtChenClick(Sender: TObject); begin if Trim(TEdit(Sender).Text) = '' then begin TEdit(Sender).Text := '√'; end else begin TEdit(Sender).Text := ''; end; SetINIFile(); end; procedure TfrmTatMachInsp.edtYJClick(Sender: TObject); begin if Trim(TEdit(Sender).Text) = '' then begin TEdit(Sender).Text := '√'; end else begin TEdit(Sender).Text := ''; end; end; procedure TfrmTatMachInsp.Button6Click(Sender: TObject); begin if ScrollBox1.Visible then ScrollBox1.Visible := False else ScrollBox1.Visible := True; end; procedure TfrmTatMachInsp.Button8Click(Sender: TObject); begin if Panel7.Visible then Panel7.Visible := False else Panel7.Visible := True; end; end.