unit U_WarpBeamManage;

interface

uses
  Windows, Messages, SysUtils, Variants, Classes, Graphics, Controls, Forms,
  Dialogs, cxGraphics, cxCustomData, cxStyles, cxTL, cxMaskEdit, DB, ADODB,
  cxInplaceContainer, cxDBTL, cxControls, cxTLData, ComCtrls, ToolWin, StdCtrls,
  cxFilter, cxData, cxDataStorage, cxEdit, cxDBData, DBClient,
  cxGridCustomTableView, cxGridTableView, cxGridDBTableView, ExtCtrls,
  cxSplitter, cxGridLevel, cxClasses, cxGridCustomView, cxGrid,
  cxGridCustomPopupMenu, cxGridPopupMenu, RM_Dataset, RM_System, RM_Common,
  RM_Class, RM_GridReport, IdBaseComponent, IdComponent, IdTCPConnection,
  IdTCPClient, IdFTP, ShellAPI, IniFiles, cxCheckBox, cxCalendar, cxButtonEdit,
  cxTextEdit, cxPC, cxCheckComboBox, cxDropDownEdit, Menus, RM_e_Xls, U_BaseList,
  cxLookAndFeels, cxLookAndFeelPainters, dxSkinsCore, dxSkinsDefaultPainters,
  cxNavigator, dxDateRanges, dxBarBuiltInMenu;

type
  TfrmWarpBeamManage = class(TFrmBaseList)
    ToolBar1: TToolBar;
    TBRafresh: TToolButton;
    TBClose: TToolButton;
    ADOQueryTemp: TADOQuery;
    ADOQueryCmd: TADOQuery;
    ToolButton2: TToolButton;
    ADOQueryMain: TADOQuery;
    ToolButton1: TToolButton;
    RM1: TRMGridReport;
    RMDB_Main: TRMDBDataSet;
    cxGrid2: TcxGrid;
    Tv2: TcxGridDBTableView;
    cxGridLevel1: TcxGridLevel;
    cxGridPopupMenu2: TcxGridPopupMenu;
    DS_HZ: TDataSource;
    CDS_HZ: TClientDataSet;
    PopupMenu1: TPopupMenu;
    N1: TMenuItem;
    N2: TMenuItem;
    Panel1: TPanel;
    WBCode: TEdit;
    RMXLSExport2: TRMXLSExport;
    v2Column8: TcxGridDBColumn;
    Label1: TLabel;
    v2Column12: TcxGridDBColumn;
    ToolButton3: TToolButton;
    ADOQueryPrt: TADOQuery;
    ToolButton4: TToolButton;
    ToolButton5: TToolButton;
    v2Column1: TcxGridDBColumn;
    ToolButton6: TToolButton;
    procedure FormDestroy(Sender: TObject);
    procedure FormClose(Sender: TObject; var Action: TCloseAction);
    procedure TBCloseClick(Sender: TObject);
    procedure FormShow(Sender: TObject);
    procedure TBRafreshClick(Sender: TObject);
    procedure ToolButton2Click(Sender: TObject);
    procedure ToolButton1Click(Sender: TObject);
    procedure cxTabControl1Change(Sender: TObject);
    procedure N1Click(Sender: TObject);
    procedure N2Click(Sender: TObject);
    procedure CustomerChange(Sender: TObject);
    procedure FormCreate(Sender: TObject);
    procedure v2Column8PropertiesEditValueChanged(Sender: TObject);
    procedure ToolButton3Click(Sender: TObject);
    procedure ToolButton4Click(Sender: TObject);
    procedure ToolButton5Click(Sender: TObject);
    procedure ToolButton6Click(Sender: TObject);
  private
    { Private declarations }
    procedure PrintReport(FZDYNo: string);
    procedure InitGrid();
    procedure EditValueT();
    procedure EditValueF();
  public
    fFlag: integer;
    { Public declarations }
    RKFlag, FCYID, fmanage: string;
  end;

var
  frmWarpBeamManage: TfrmWarpBeamManage;

implementation

uses
  U_DataLink, U_RTFun, U_ZDYHelp;

{$R *.dfm}

procedure TfrmWarpBeamManage.PrintReport(FZDYNo: string);
var
  fPrintFile, FFCYID: string;
  i, j: Integer;
  Txt, fImagePath: string;
  Moudle: THandle;
  Makebar: TMakebar;
  Mixtext: TMixtext;
begin
  if CDS_HZ.IsEmpty then
    Exit;

  ExportFtErpFile('经轴标签.rmf', ADOQueryTemp);
  fPrintFile := ExtractFilePath(Application.ExeName) + 'Report\经轴标签.rmf';
  with ADOQueryPrt do
  begin
    close;
    sql.Clear;
    sql.Add(' select * from  BS_WarpBeam where WBId=''' + Trim(FZDYNo) + '''');
    open;
  end;
  try
    Moudle := LoadLibrary('MakeQRBarcode.dll');
    @Makebar := GetProcAddress(Moudle, 'Make');
    @Mixtext := GetProcAddress(Moudle, 'MixText');
    Txt := Trim(FZDYNo);
    fImagePath := ExtractFilePath(Application.ExeName) + 'image\temp.bmp';
    if not DirectoryExists(pchar(ExtractFilePath(Application.ExeName) + 'image')) then
      CreateDirectory(pchar(ExtractFilePath(Application.ExeName) + 'image'), nil);
    if FileExists(fImagePath) then
      DeleteFile(fImagePath);
    Makebar(pchar(Txt), Length(Txt), 3, 3, 0, PChar(fImagePath), 3);
  except
    CDS_HZ.EnableControls;
    application.MessageBox('条形码生成失败！', '提示信息', MB_ICONERROR);
    exit;
  end;
  RMVariables['QRBARCODE'] := fImagePath;
  if FileExists(fPrintFile) then
  begin
    RM1.LoadFromFile(fPrintFile);
    RM1.PrintReport;
  //  RM1.ShowReport;
  end
  else
  begin
    Application.MessageBox(PChar('没有找' + fPrintFile + '!'), '提示', 0);
    Exit;
  end;
end;

procedure TfrmWarpBeamManage.InitGrid();
begin
  WBCode.SetFocus;
  try
    ADOQueryMain.DisableControls;
    with ADOQueryMain do
    begin
      Close;
      SQL.Clear;
      sql.Add(' select A.* from  BS_WarpBeam A  ');
      Open;
    end;
    SCreateCDS(ADOQueryMain, CDS_HZ);
    SInitCDSData(ADOQueryMain, CDS_HZ);
  finally
    ADOQueryMain.EnableControls;
    ToolButton2.Click;
  end;
  EditValueF();
end;

procedure TfrmWarpBeamManage.FormDestroy(Sender: TObject);
begin
  inherited;
  frmWarpBeamManage := nil;
end;

procedure TfrmWarpBeamManage.FormClose(Sender: TObject; var Action: TCloseAction);
begin
  inherited;
  Action := caFree;
end;

procedure TfrmWarpBeamManage.TBCloseClick(Sender: TObject);
begin
  WriteCxGrid(Trim(Self.Caption), Tv2, '机台管理');
  Close;
end;

procedure TfrmWarpBeamManage.FormShow(Sender: TObject);
begin
  inherited;
  ReadCxGrid(Trim(Self.Caption), Tv2, '机台管理');
//  Enddate.DateTime:=SGetServerDate(ADOQueryTemp);
//  begdate.DateTime:=Enddate.DateTime-30;
  InitGrid();
end;

procedure TfrmWarpBeamManage.TBRafreshClick(Sender: TObject);
begin
  InitGrid();
end;

procedure TfrmWarpBeamManage.ToolButton2Click(Sender: TObject);
var
  sql: string;
begin
  if ADOQueryMain.Active then
  begin
    sql := SGetFilters(Panel1, 1, 2);
    SDofilter(ADOQueryMain, sql);
    SCreateCDS(ADOQueryMain, CDS_HZ);
    SInitCDSData(ADOQueryMain, CDS_HZ);
  end;
end;

procedure TfrmWarpBeamManage.ToolButton1Click(Sender: TObject);
begin
  if ADOQueryMain.IsEmpty then
    Exit;
//  SelExportData(Tv2, ADOQueryMain, trim(Self.Caption));
  TcxGridToExcel(self.Caption, cxgrid2);
end;

procedure TfrmWarpBeamManage.cxTabControl1Change(Sender: TObject);
begin
  InitGrid;
end;

procedure TfrmWarpBeamManage.N1Click(Sender: TObject);
begin
  if CDS_HZ.IsEmpty then
    exit;
  SelOKNo(CDS_HZ, True);
end;

procedure TfrmWarpBeamManage.N2Click(Sender: TObject);
begin
  if CDS_HZ.IsEmpty then
    exit;
  SelOKNo(CDS_HZ, False);
end;

procedure TfrmWarpBeamManage.CustomerChange(Sender: TObject);
begin
  ToolButton2.Click;
end;

procedure TfrmWarpBeamManage.FormCreate(Sender: TObject);
begin
  inherited;
  fmanage := Trim(DParameters1);
end;

procedure TfrmWarpBeamManage.v2Column8PropertiesEditValueChanged(Sender: TObject);
var
  mvalue, FFieldName: string;
begin
  mvalue := TcxTextEdit(Sender).EditingText;
  FFieldName := Trim(Tv2.Controller.FocusedColumn.DataBinding.FilterFieldName);
  try
    ADOQueryCmd.Connection.BeginTrans;
    with CDS_HZ do
    begin
      Edit;
      FieldByName(FFieldName).Value := Trim(mvalue);
      Post;
    end;
    with ADOQueryCmd do
    begin
      Close;
      sql.Clear;
      sql.Add('UPdate BS_WarpBeam ');
      sql.Add(' Set ' + FFieldName + '=''' + Trim(mvalue) + '''');
      sql.Add(' , Editer=''' + Trim(DName) + '''');
      sql.Add(' , Edittime=getdate()');
      sql.Add(' where WBId=' + quotedstr(CDS_HZ.fieldbyname('WBId').AsString));
      ExecSQL;
    end;
    ADOQueryCmd.Connection.CommitTrans;
    tv2.Controller.EditingController.ShowEdit();
  except
    tv2.Controller.EditingController.ShowEdit();
    ADOQueryCmd.Connection.RollbackTrans;
    Application.MessageBox('保存失败！', '提示', 0);
  end
end;

procedure TfrmWarpBeamManage.ToolButton3Click(Sender: TObject);
begin
  if CDS_HZ.IsEmpty then
    Exit;
  if CDS_HZ.Locate('SSel', True, []) = False then
  begin
    Application.MessageBox('请先选择数据！', '提示', 0);
    Exit;
  end;
  with CDS_HZ do
  begin
    while CDS_HZ.Locate('SSel', True, []) = True do
    begin

      with ADOQueryCmd do
      begin
        Close;
        sql.Clear;
        sql.Add('update BS_WarpBeam set EditFlag=0 where WBId=' + QuotedStr(CDS_HZ.FieldByName('WBId').AsString));
        ExecSQL;
      end;
      CDS_HZ.Edit;
      CDS_HZ.FieldByName('SSel').Value := False;
      CDS_HZ.Post;
      PrintReport(Trim(CDS_HZ.fieldbyname('WBId').AsString));
      Next;
    end;
  end;

end;

procedure TfrmWarpBeamManage.ToolButton4Click(Sender: TObject);
var
  maxId: string;
begin
  WBCode.SetFocus;
  if GetLSNo(ADOQueryCmd, maxId, 'WB', 'BS_WarpBeam', 4, 1) = False then
  begin
    Application.MessageBox('取最大号失败！', '提示', 0);
    Exit;
  end;
  with ADOQueryCmd do
  begin
    Close;
    sql.Clear;
    sql.Add('insert into BS_WarpBeam(WBId,Filler) values(' + quotedstr(Trim(maxId)) + ',' + quotedstr(Trim(dname)) + ')');
    ExecSQL;
  end;
  InitGrid();
  EditValueT();
end;

procedure TfrmWarpBeamManage.ToolButton5Click(Sender: TObject);
begin
  if CDS_HZ.IsEmpty then
    Exit;

  if CDS_HZ.Locate('SSel', True, []) = False then
  begin
    Application.MessageBox('请先选择数据！', '提示', 0);
    Exit;
  end;

  if Application.MessageBox('确定要删除数据吗？', '提示', 32 + 4) <> IDYES then
    Exit;

  with CDS_HZ do
  begin
    while not Eof do
    begin
      if CDS_HZ.Locate('SSel', True, []) = True then
      begin
        with ADOQueryCmd do
        begin
          Close;
          sql.Clear;
          sql.Add('delete BS_WarpBeam where WBId=''' + Trim(CDS_HZ.fieldbyname('WBId').AsString) + ''' ');
          ExecSQL;
        end;
      end;

      CDS_HZ.Edit;
      CDS_HZ.FieldByName('SSel').Value := False;
      CDS_HZ.Post;
      Next;
    end;
  end;
  InitGrid();
end;

procedure TfrmWarpBeamManage.ToolButton6Click(Sender: TObject);
begin
  if CDS_HZ.IsEmpty then
    Exit;

  EditValueT();

end;

procedure TfrmWarpBeamManage.EditValueT();
var
  i: Integer;
begin
  for i := 0 to tv2.ColumnCount - 1 do
  begin
    if uppercase(tv2.Columns[i].DataBinding.FieldName) <> 'SSEL' then
      tv2.Columns[i].Options.Editing := True;
  end;
end;

procedure TfrmWarpBeamManage.EditValueF();
var
  i: Integer;
begin
  for i := 0 to tv2.ColumnCount - 1 do
  begin
    if uppercase(tv2.Columns[i].DataBinding.FieldName) <> 'SSEL' then
      tv2.Columns[i].Options.Editing := false;
  end;
end;

end.