unit U_KnitCardInPut;

interface

uses
  Windows, Messages, SysUtils, Variants, Classes, Graphics, Controls, Forms,
  Dialogs, StdCtrls, ExtCtrls, ComCtrls, ToolWin, cxStyles, cxCustomData,
  cxGraphics, cxFilter, cxData, cxDataStorage, cxEdit, DB, cxDBData, ADODB,
  cxGridCustomPopupMenu, cxGridPopupMenu, cxGridLevel, cxClasses, cxControls,
  cxGridCustomView, cxGridCustomTableView, cxGridTableView, cxGridDBTableView,
  cxGrid, DBClient, cxCalendar, cxButtonEdit, cxSplitter, RM_Common, RM_Class,
  RM_e_Xls, RM_Dataset, RM_System, RM_GridReport, cxTextEdit, cxCheckBox,
  BtnEdit, cxPC, MovePanel, cxLookAndFeels, cxLookAndFeelPainters, cxNavigator,
  dxBarBuiltInMenu, dxSkinsCore, dxSkinsDefaultPainters, dxDateRanges,
  U_BaseList, Vcl.Menus, U_BaseInput, System.ImageList, Vcl.ImgList, StrUtils;

type
  TfrmKnitCardInPut = class(TfrmBaseInput)
    GPM_1: TcxGridPopupMenu;
    ADOQueryCmd: TADOQuery;
    ADOQueryMain: TADOQuery;
    ADOQueryTemp: TADOQuery;
    DS_1: TDataSource;
    CDS_1: TClientDataSet;
    DS_2: TDataSource;
    CDS_2: TClientDataSet;
    GPM_2: TcxGridPopupMenu;
    Panel4: TPanel;
    PM_1: TPopupMenu;
    PM_2: TPopupMenu;
    Panel5: TPanel;
    Panel2: TPanel;
    Label10: TLabel;
    Label11: TLabel;
    Button3: TButton;
    edtMachNo: TEdit;
    edtCardQty: TEdit;
    Repairer: TBtnEditC;
    Panel1: TPanel;
    N2: TMenuItem;
    cxStyleRepository1: TcxStyleRepository;
    cxStyle1: TcxStyle;
    cxGrid1: TcxGrid;
    Tv1: TcxGridDBTableView;
    cxGrid1Level1: TcxGridLevel;
    cxGrid2: TcxGrid;
    TV2: TcxGridDBTableView;
    TV2Column1: TcxGridDBColumn;
    TV2Column2: TcxGridDBColumn;
    TV2Column3: TcxGridDBColumn;
    TV2Column4: TcxGridDBColumn;
    TV2Column5: TcxGridDBColumn;
    TV2Column6: TcxGridDBColumn;
    cxGridLevel1: TcxGridLevel;
    Label3: TLabel;
    MCNO: TEdit;
    ToolBar1: TToolBar;
    ToolButton12: TToolButton;
    TBClose: TToolButton;
    Label7: TLabel;
    BatchNo: TEdit;
    TV2Column7: TcxGridDBColumn;
    Panel3: TPanel;
    Label1: TLabel;
    Label12: TLabel;
    Label13: TLabel;
    Label21: TLabel;
    edtName: TEdit;
    edtCode: TEdit;
    edtConNo: TEdit;
    edtWAPPS: TEdit;
    Label8: TLabel;
    Label9: TLabel;
    edtYAPPS: TEdit;
    Tv1Column1: TcxGridDBColumn;
    Tv1Column2: TcxGridDBColumn;
    Label4: TLabel;
    isDY: TComboBox;
    Tv1Column3: TcxGridDBColumn;
    Tv1Column4: TcxGridDBColumn;
    ToolButton1: TToolButton;
    procedure FormDestroy(Sender: TObject);
    procedure FormClose(Sender: TObject; var Action: TCloseAction);
    procedure TBCloseClick(Sender: TObject);
    procedure TBFindClick(Sender: TObject);
    procedure TBRafreshClick(Sender: TObject);
    procedure MCNOChange(Sender: TObject);
    procedure FormShow(Sender: TObject);
    procedure cxTabControl1Change(Sender: TObject);
    procedure Button3Click(Sender: TObject);
    procedure Tv1DblClick(Sender: TObject);
    procedure ToolButton12Click(Sender: TObject);
    procedure N2Click(Sender: TObject);
    procedure Tv1CustomDrawCell(Sender: TcxCustomGridTableView; ACanvas: TcxCanvas; AViewInfo: TcxGridTableDataCellViewInfo; var ADone: Boolean);
    procedure RepairerBtnDnClick(Sender: TObject);
    procedure RepairerBtnUpClick(Sender: TObject);
    procedure ToolButton1Click(Sender: TObject);
  private
    procedure InitOrd();
    procedure InitGrid1();
    procedure InitGrid2();
    { Private declarations }
  public
    FMainId, FSubId: string;
    { Public declarations }
  end;

var
  frmKnitCardInPut: TfrmKnitCardInPut;

implementation

uses
  U_DataLink, U_RTFun, U_ZDYHelp, U_LabelPrint, U_KnitPlanSel;
  {$R *.dfm}

procedure TfrmKnitCardInPut.InitOrd();
begin

  with ADOQueryTemp do
  begin
    Close;
    sql.Clear;
    sql.Add(' select A.*,B.*');
    sql.Add(' ,YAPPS=ISNULL((select count(*) from Knit_Plan_Card X where X.MainId=A.MainId),0)');
    sql.Add(' ,WAPPS=OrdPiece-ISNULL((select count(*) from Knit_Plan_Card X where X.MainId=A.MainId),0)');
    sql.Add(' from knit_Plan_Main A');
    sql.Add(' inner join knit_Plan_Sub B on A.MainId=B.MainId ');
    sql.Add(' where B.SubId=' + QuotedStr(FSubId));
    Open;
  end;
  edtConNo.Text := ADOQueryTemp.FieldByName('OrderNo').AsString;
  edtCode.Text := ADOQueryTemp.FieldByName('C_Code').AsString;
  edtName.Text := ADOQueryTemp.FieldByName('C_Name').AsString;
  edtYAPPS.Text := ADOQueryTemp.FieldByName('YAPPS').AsString;
  edtWAPPS.Text := ADOQueryTemp.FieldByName('WAPPS').AsString;

  Repairer.Text := ADOQueryTemp.FieldByName('Repairer').AsString;
end;

procedure TfrmKnitCardInPut.N2Click(Sender: TObject);
begin
  with ADOQueryTemp do
  begin
    close;
    sql.Clear;
    sql.Add(' select * from knit_Plan_Card A where A.PRTCount>1 and A.PMID=' + quotedstr(trim(CDS_2.fieldbyname('PMID').AsString)));
    Open;
  end;
  if not ADOQueryTemp.IsEmpty then
  begin
    Application.MessageBox('已打印布票不能删除!', '提示', 0);
    Exit;
  end;
  with ADOQueryCmd do
  begin
    close;
    sql.Clear;
    sql.Add('delete knit_Plan_Mach ');
    sql.Add('where PMID=' + quotedstr(trim(CDS_2.fieldbyname('PMID').AsString)));
    sql.Add('delete knit_Plan_Card ');
    sql.Add('where PMID=' + quotedstr(trim(CDS_2.fieldbyname('PMID').AsString)));
    execsql;
  end;
  CDS_2.Delete;
end;

procedure TfrmKnitCardInPut.RepairerBtnDnClick(Sender: TObject);
begin
  Repairer.Text := '';
end;

procedure TfrmKnitCardInPut.RepairerBtnUpClick(Sender: TObject);
begin
  try
    frmZDYHelp := TfrmZDYHelp.Create(Application);
    with frmZDYHelp do
    begin
      flag := 'Repairer';
      flagname := '机修工';
      if ShowModal = 1 then
      begin
        Repairer.Text := Trim(ClientDataSet1.fieldbyname('ZDYName').AsString);
      end;
    end;
  finally
    frmZDYHelp.Free;
  end;
end;

procedure TfrmKnitCardInPut.InitGrid1();
var
  fwhere: string;
begin
  try
    ADOQueryMain.DisableControls;
    with ADOQueryMain do
    begin
      Close;
      sql.Clear;
      sql.Add(' select * ');
      sql.Add(' ,ZWJYPS=(select count(*) from Knit_Plan_Card X where X.Loom =AA.MCNO and isnull(Status,''0'')=''0'') ');
      sql.Add(' ,BWJYPS=(select count(*) from Knit_Plan_Card X where X.Loom =AA.MCNO and isnull(Status,''0'')=''0'' and MainID=''' + trim(FMainID) + ''')');
      sql.Add(' from (select A.MCNO,ISAP=''0'' from BS_Machine A where EXISTS (select Loom from Knit_Plan_Card X where X.Loom = A.MCNO and X.MainID=''' + trim(FMainID) + ''')');
      sql.Add(' UNION   ');
      sql.Add(' select A.MCNO,ISAP=''1'' from BS_Machine A where not EXISTS (select Loom from Knit_Plan_Card X where X.Loom = A.MCNO and X.MainID=''' + trim(FMainID) + ''')');
      sql.Add(' ) AA Order BY ISAP,MCNO');
//      ShowMessage(sql.text);
      Open;
    end;
    SCreateCDS(ADOQueryMain, CDS_1);
    SInitCDSData(ADOQueryMain, CDS_1);
  finally
    ADOQueryMain.EnableControls;
  end;
end;

procedure TfrmKnitCardInPut.InitGrid2();
begin
  with ADOQueryTemp do
  begin
    Close;
    sql.Clear;

    sql.Add(' select Loom,BatchNo,PCDate=CONVERT(VARCHAR(10),PCDate,120)');
    sql.Add(' ,APPS=COUNT(pcid)                                         ');
    sql.Add(',DYPS=SUM(case when Status = ''1''  then 1 else 0 end)   ');
    sql.Add(',JYPS=SUM(case when Status = ''1''  then 1 else 0 end)  ');
    sql.Add(' from Knit_Plan_Card A where MainId =''' + trim(FMainId) + '''');
    sql.Add('  GROUP BY Loom,BatchNo,CONVERT(VARCHAR(10),PCDate,120) ');

    Open;
  end;

  SCreateCDS(ADOQueryTemp, CDS_2);
  SInitCDSData(ADOQueryTemp, CDS_2);
end;

procedure TfrmKnitCardInPut.FormDestroy(Sender: TObject);
begin
  inherited;
  frmKnitCardInPut := nil;
end;

procedure TfrmKnitCardInPut.FormClose(Sender: TObject; var Action: TCloseAction);
begin
  inherited;
  Action := caFree;
end;

procedure TfrmKnitCardInPut.TBCloseClick(Sender: TObject);
begin
  Close;

end;

procedure TfrmKnitCardInPut.TBFindClick(Sender: TObject);
begin
  if ADOQueryMain.Active = False then
    Exit;
  SDofilter(ADOQueryMain, SGetFilters(Panel1, 1, 2));
  SCreateCDS(ADOQueryMain, CDS_1);
  SInitCDSData(ADOQueryMain, CDS_1);
end;

procedure TfrmKnitCardInPut.TBRafreshClick(Sender: TObject);
begin
  InitGrid1();
  InitGrid2();

end;

procedure TfrmKnitCardInPut.MCNOChange(Sender: TObject);
begin
  if ADOQueryMain.Active = False then
    Exit;
  SDofilter(ADOQueryMain, SGetFilters(Panel1, 1, 2));
  SCreateCDS(ADOQueryMain, CDS_1);
  SInitCDSData(ADOQueryMain, CDS_1);
end;

procedure TfrmKnitCardInPut.FormShow(Sender: TObject);
begin
  inherited;

  ReadCxGrid(trim(self.Caption) + 'Tv1', Tv1, '指示单管理');
  ReadCxGrid(trim(self.Caption) + 'Tv2', Tv2, '指示单管理');

  InitOrd();
  InitGrid1();
  InitGrid2();
end;

procedure TfrmKnitCardInPut.cxTabControl1Change(Sender: TObject);
begin
  InitGrid1();
end;

procedure TfrmKnitCardInPut.Button3Click(Sender: TObject);
var
  maxno, maxPCId, WSql: string;
  FStrs: TStringList;
  i, j, MPCNo: integer;
begin
  if edtMachNo.Text = '' then
    Exit;
  if StrToIntdef(edtCardQty.Text, 0) = 0 then
    Exit;
  try
    FStrs := TStringList.Create();
    ExtractStrings([';'], [' '], PChar(edtMachNo.Text), FStrs);
    ADOQueryCmd.Connection.BeginTrans;

    if FStrs.Count * StrToIntdef(edtCardQty.Text, 0) > StrToIntdef(edtWAPPS.text, 0) then
    begin
      raise Exception.Create('安排数量过多!');
    end;
    ///////////////判断是否超出限制//////////////////


    for i := 0 to FStrs.Count - 1 do
    begin
      with ADOQueryTemp do
      begin
        Close;
        sql.Clear;
        sql.Add('select PCNo=isnull(Max(PCNo),0)  ');
        sql.Add('from Knit_Plan_Card A ');
        sql.Add('where A.MainID=' + Quotedstr(Trim(FMainID)));
        sql.Add('and A.Loom=' + Quotedstr(Trim(FStrs[i])));
        Open;
      end;
      if ADOQueryTemp.IsEmpty then
        MPCNo := 1
      else
        MPCNo := ADOQueryTemp.FieldByName('PCNo').AsInteger + 1;
//////////////////            插入布票               //////////////////////
      if GetLSNo(ADOQueryTemp, maxno, 'PC', 'knit_Plan_Mach', 2, 1) = False then
      begin
        raise Exception.Create('取布票流水号失败!');
      end;
      with ADOQueryCmd do
      begin
        Close;
        sql.Clear;
        sql.Add(' insert into Knit_Plan_Card(MainId,SubId,Loom,PCId,PCNo,PCDate,Filler,BatchNo) values');
        for j := 1 to StrToIntdef(edtCardQty.Text, 0) do
        begin
          maxPCId := maxno + RightStr('00' + inttostr(j), 3);
          if j > 1 then
            sql.Add(',');
          sql.Add(' (' + Quotedstr(Trim(FMainId)));
          sql.Add(',' + Quotedstr(Trim(FSubId)));
          sql.Add(',' + Quotedstr(Trim(FStrs[i])));
          sql.Add(',' + Quotedstr(maxPCId));
          sql.Add(',' + Quotedstr(IntToStr(MPCNo)));
          sql.Add(',getdate() ');
          sql.Add(',' + Quotedstr(Trim(DName)));
          sql.Add(',' + Quotedstr(Trim(BatchNo.Text)));
          sql.Add(' )');
          MPCNo := MPCNo + 1;

          if WSql <> '' then
          begin
            WSql := WSql + ',' + QuotedStr(Trim(maxPCId));
          end
          else
          begin
            WSql := QuotedStr(Trim(maxPCId));
          end;
        end;
        ExecSQL;
      end;
//////////////////            插入布票               //////////////////////
///
    end;

    with ADOQueryCmd do
    begin
      close;
      sql.Clear;
      sql.Add('update  knit_Plan_Main SET status=''9'',chker=''' + trim(DName) + ''',Chktime=getdate() ');
      sql.Add('where isnull(status,''0'')=''0'' and mainID=' + quotedstr(trim(FMainID)));

//      sql.Add('insert into SY_SysLog(operor,opertime,Model,acction,opevent,result) values( ');
//      sql.Add(' ' + quotedstr(trim(DName)));
//      sql.Add(',getdate() ');
//      sql.Add(',' + quotedstr(trim(self.Caption)));
//      sql.Add(',' + quotedstr(trim('生产单开始')));
//      sql.Add(',' + quotedstr(trim('计划单号：' + trim(edtConNo.Text))));
//      sql.Add(',' + quotedstr(trim('成功')));
//      sql.Add(')');
      execsql;
    end;

    ADOQueryCmd.Connection.CommitTrans;
    FStrs.Free;
  except
    FStrs.Free;
    ADOQueryCmd.Connection.RollbackTrans;
    if GetLSNo(ADOQueryTemp, maxPCId, 'PC', 'knit_Plan_Mach', 3, 1) = False then
    begin
//      raise Exception.Create('取布票流水号失败!');
    end;

    application.MessageBox(PChar(Exception(ExceptObject).Message), '提示信息', 0);
  end;

  if trim(isDY.text) = '是' then
  begin
    try
      frmLabelPrint := TfrmLabelPrint.Create(Application);
      with frmLabelPrint do
      begin
        FPreviewPrint := False;
        FLMType := 'KnitPlanCard';
        FFiltration1 := WSql;
        if ShowModal = 1 then
        begin
//        Self.InitGrid();
          with ADOQueryCmd do
          begin
            Close;
            sql.Clear;
            sql.Add('update Knit_Plan_Card         ');
            sql.Add('set PRTer=' + quotedstr(DName));
            sql.Add(', PRTCount=PRTCount+1');
            sql.Add(', PRTDate=getdate()');
            sql.Add(' where PCID in (' + WSql + ')');
            ExecSQL;
          end;
        end;
      end;
    finally
      frmLabelPrint.Free;
    end;
  end;
  InitGrid1();
  InitGrid2();
  edtMachNo.text := '';
end;

procedure TfrmKnitCardInPut.Tv1CustomDrawCell(Sender: TcxCustomGridTableView; ACanvas: TcxCanvas; AViewInfo: TcxGridTableDataCellViewInfo; var ADone: Boolean);
begin

  if '0' = AViewInfo.GridRecord.Values[Tv1Column2.Index] then
    ACanvas.Brush.Color := $66ff66;
end;

procedure TfrmKnitCardInPut.Tv1DblClick(Sender: TObject);
var
  FStrs: TStringList;
begin
  try
    FStrs := TStringList.Create();
    ExtractStrings([';'], [' '], PChar(edtMachNo.Text), FStrs);
    if FStrs.IndexOf(Trim(CDS_1.FieldByName('MCNO').AsString)) < 0 then
      edtMachNo.Text := edtMachNo.Text + TRIM(CDS_1.FieldByName('MCNO').AsString) + ';';
  finally
    FStrs.Free
  end;
end;

procedure TfrmKnitCardInPut.ToolButton12Click(Sender: TObject);
begin
  WriteCxGrid(trim(self.Caption) + 'Tv1', Tv1, '指示单管理');
  WriteCxGrid(trim(self.Caption) + 'Tv2', Tv2, '指示单管理');
end;

procedure TfrmKnitCardInPut.ToolButton1Click(Sender: TObject);
begin
  try
    frmKnitPlanSel := TfrmKnitPlanSel.Create(Application);
    with frmKnitPlanSel do
    begin
      if ShowModal = 1 then
      begin
        self.FMainId := Trim(frmKnitPlanSel.CDS_1.fieldbyname('MainId').AsString);
        self.FSubId := Trim(frmKnitPlanSel.CDS_1.fieldbyname('SubId').AsString);
      end;
    end;
  finally
    frmKnitPlanSel.Free;
  end;
  InitOrd();
  InitGrid1();
  InitGrid2();
end;

end.