unit U_TradePlanList;

interface

uses
  Windows, Messages, SysUtils, Variants, Classes, Graphics, Controls, Forms,
  Dialogs, cxStyles, cxCustomData, cxGraphics, cxFilter, cxData, cxDataStorage,
  cxEdit, DB, cxDBData, cxGridLevel, cxGridCustomTableView, cxGridTableView,
  cxGridDBTableView, cxClasses, cxControls, cxGridCustomView, cxGrid, cxMemo,
  cxRichEdit, ComCtrls, cxContainer, cxTextEdit, cxMaskEdit, cxButtonEdit,
  StdCtrls, ToolWin, DBClient, ADODB, ExtCtrls, BtnEdit, cxCalendar, StrUtils,
  cxCurrencyEdit, cxImage, cxDBEdit, Menus, RM_Common, RM_Class, RM_e_Xls,
  RM_Dataset, RM_System, RM_GridReport, cxGridCustomPopupMenu, cxGridPopupMenu,
  cxPC, cxSplitter, IdBaseComponent, IdComponent, IdTCPConnection, IdTCPClient,
  IdFTP, ShellAPI, cxDropDownEdit, cxCheckBox, RM_e_Graphic, RM_e_Jpeg,
  U_BaseList, cxLookAndFeels, cxLookAndFeelPainters, 
    cxNavigator, dxDateRanges,
  dxScrollbarAnnotations, dxBarBuiltInMenu, IdExplicitTLSClientServerBase,
  FrameDateSel,
  cxProgressBar, dxSkinsCore, dxSkinsDefaultPainters;

type
  TfrmTradePlanList = class(TfrmBaseList)
    ToolBar1: TToolBar;
    TBRafresh: TToolButton;
    TBAdd: TToolButton;
    TBEdit: TToolButton;
    TBDel: TToolButton;
    TBPrint: TToolButton;
    TBClose: TToolButton;
    Panel1: TPanel;
    Tv1: TcxGridDBTableView;
    cxGrid1Level1: TcxGridLevel;
    cxGrid1: TcxGrid;
    cxgrdpmn1: TcxGridPopupMenu;
    ADOQueryCmd: TADOQuery;
    ADOQueryMain: TADOQuery;
    ADOQueryTemp: TADOQuery;
    DataSource1: TDataSource;
    Label3: TLabel;
    OrderNo: TcxTextEdit;
    v1OrderNo: TcxGridDBColumn;
    v1OrdDate: TcxGridDBColumn;
    v1DeliveryDate: TcxGridDBColumn;
    Order_Main: TClientDataSet;
    TBCK: TToolButton;
    btnCopy: TToolButton;
    ADOQuerySub: TADOQuery;
    DataSource2: TDataSource;
    ToolButton4: TToolButton;
    cxTabControl1: TcxTabControl;
    Tchk: TToolButton;
    Tnochk: TToolButton;
    TWC: TToolButton;
    TNowc: TToolButton;
    Panel2: TPanel;
    ADOQueryImage: TADOQuery;
    DSImage: TDataSource;
    IdFTP1: TIdFTP;
    v1Column11: TcxGridDBColumn;
    TBTJ: TToolButton;
    TBTJCX: TToolButton;
    v1Column16: TcxGridDBColumn;
    ORDER_SUB: TClientDataSet;
    PopupMenu2: TPopupMenu;
    N3: TMenuItem;
    N4: TMenuItem;
    Label1: TLabel;
    CustName: TcxTextEdit;
    Tv1Column6: TcxGridDBColumn;
    cxgrdpmn2: TcxGridPopupMenu;
    cxGrid2: TcxGrid;
    TV2: TcxGridDBTableView;
    cxGridDBColumn1: TcxGridDBColumn;
    v1PRTColor: TcxGridDBColumn;
    cxGridDBColumn4: TcxGridDBColumn;
    v1Column5: TcxGridDBColumn;
    VC_PRTPs: TcxGridDBColumn;
    v1PRTOrderQty: TcxGridDBColumn;
    v1OrderUnit: TcxGridDBColumn;
    cxGridDBColumn7: TcxGridDBColumn;
    cxGridLevel1: TcxGridLevel;
    Tv1Column2: TcxGridDBColumn;
    Tv1Column10: TcxGridDBColumn;
    Tv1Column11: TcxGridDBColumn;
    Tv1Column1: TcxGridDBColumn;
    Label2: TLabel;
    C_Name: TcxTextEdit;
    CDS_WXTS: TClientDataSet;
    Label4: TLabel;
    ConNo: TcxTextEdit;
    Tv1Column22: TcxGridDBColumn;
    ToolButton2: TToolButton;
    PM_1: TPopupMenu;
    N1: TMenuItem;
    N2: TMenuItem;
    GPM_3: TcxGridPopupMenu;
    Tv1Column3: TcxGridDBColumn;
    Tv1Column12: TcxGridDBColumn;
    Tv1Column13: TcxGridDBColumn;
    Tv1Column14: TcxGridDBColumn;
    Tv1Column15: TcxGridDBColumn;
    Tv1Column16: TcxGridDBColumn;
    Tv1Column4: TcxGridDBColumn;
    ToolButton1: TToolButton;
    TV2Column1: TcxGridDBColumn;
    Tv1Column5: TcxGridDBColumn;
    Tv1Column8: TcxGridDBColumn;
    Tv1Column9: TcxGridDBColumn;
    Tv1Column17: TcxGridDBColumn;
    Tv1Column18: TcxGridDBColumn;
    TV2Column3: TcxGridDBColumn;
    TV2Column4: TcxGridDBColumn;
    N5: TMenuItem;
    N6: TMenuItem;
    ToolButton3: TToolButton;
    Tv1Column19: TcxGridDBColumn;
    TV2Column2: TcxGridDBColumn;
    frmFrameDateSel1: TfrmFrameDateSel;
    ToolButton5: TToolButton;
    Tv1Column7: TcxGridDBColumn;
    Tv1Column20: TcxGridDBColumn;
    Tv1Column21: TcxGridDBColumn;
    ToolButton6: TToolButton;
    Tv1Column23: TcxGridDBColumn;
    Tv1Column24: TcxGridDBColumn;
    TV2Column5: TcxGridDBColumn;
    Tv1Column25: TcxGridDBColumn;
    Tv1Column26: TcxGridDBColumn;
    Tv1Column27: TcxGridDBColumn;
    cxGrid3: TcxGrid;
    TV3: TcxGridDBTableView;
    cxGridDBColumn2: TcxGridDBColumn;
    cxGridDBColumn3: TcxGridDBColumn;
    cxGridDBColumn8: TcxGridDBColumn;
    cxGridDBColumn9: TcxGridDBColumn;
    cxGridDBColumn11: TcxGridDBColumn;
    cxGridLevel2: TcxGridLevel;
    ADOQueryFty: TADOQuery;
    DS_3: TDataSource;
    CDS_3: TClientDataSet;
    TV2Column6: TcxGridDBColumn;
    procedure FormDestroy(Sender: TObject);
    procedure FormClose(Sender: TObject; var Action: TCloseAction);
    procedure FormCreate(Sender: TObject);
    procedure TBCloseClick(Sender: TObject);
    procedure TBEditClick(Sender: TObject);
    procedure TBDelClick(Sender: TObject);
    procedure TBPrintClick(Sender: TObject);
    procedure TBRafreshClick(Sender: TObject);
    procedure TBAddClick(Sender: TObject);
    procedure OrderNoMChange(Sender: TObject);
    procedure FormShow(Sender: TObject);
    procedure TBTPClick(Sender: TObject);
    procedure CheckBox1Click(Sender: TObject);
    procedure CheckBox2Click(Sender: TObject);
    procedure Tv1StylesGetContentStyle(Sender: TcxCustomGridTableView; ARecord: TcxCustomGridRecord; AItem: TcxCustomGridTableItem; out AStyle: TcxStyle);
    procedure v1DeliveryDateCustomDrawCell(Sender: TcxCustomGridTableView; ACanvas: TcxCanvas; AViewInfo: TcxGridTableDataCellViewInfo; var ADone: Boolean);
    procedure TBCKClick(Sender: TObject);
    procedure btnCopyClick(Sender: TObject);
    procedure OrderNoKeyPress(Sender: TObject; var Key: Char);
    procedure Tv1FocusedRecordChanged(Sender: TcxCustomGridTableView; APrevFocusedRecord, AFocusedRecord: TcxCustomGridRecord; ANewItemRecordFocusingChanged: Boolean);
    procedure ToolButton4Click(Sender: TObject);
    procedure cxTabControl1Change(Sender: TObject);
    procedure TchkClick(Sender: TObject);
    procedure TnochkClick(Sender: TObject);
    procedure TWCClick(Sender: TObject);
    procedure TNowcClick(Sender: TObject);
    procedure TBTJClick(Sender: TObject);
    procedure TBTJCXClick(Sender: TObject);
    procedure N3Click(Sender: TObject);
    procedure N4Click(Sender: TObject);
    procedure ComboBox1Change(Sender: TObject);
    procedure CustomerNoNameKeyPress(Sender: TObject; var Key: Char);
    procedure ToolButton10Click(Sender: TObject);
    procedure JGTypeChange(Sender: TObject);
    procedure Tv1CellDblClick(Sender: TcxCustomGridTableView; ACellViewInfo: TcxGridTableDataCellViewInfo; AButton: TMouseButton; AShift: TShiftState; var AHandled: Boolean);
    procedure ToolButton2Click(Sender: TObject);
    procedure N1Click(Sender: TObject);
    procedure N2Click(Sender: TObject);
    procedure ToolButton1Click(Sender: TObject);
    procedure N5Click(Sender: TObject);
    procedure N6Click(Sender: TObject);
    procedure ToolButton3Click(Sender: TObject);
    procedure ToolButton5Click(Sender: TObject);
    procedure ToolButton6Click(Sender: TObject);
    procedure TV2Column5PropertiesEditValueChanged(Sender: TObject);
    procedure TV2CustomDrawCell(Sender: TcxCustomGridTableView; ACanvas: TcxCanvas; AViewInfo: TcxGridTableDataCellViewInfo; var ADone: Boolean);
  private
    DQdate: TDateTime;
    procedure InitGrid();
    procedure InitForm();
    procedure InitSub();
    procedure InitFty();
    procedure SetStatus();
    procedure InitImage(fwbid: string);
    procedure SendMessageQR(MDateId, KeyWord1, KeyWord2, KeyWord3: string);
    { Private declarations }
  public
    FFInt, FCloth: Integer;
    canshu1, canshu2: string;
    fFlileFlag: string;
    FNOTE: string;
    { Public declarations }
  end;

implementation

uses
  U_DataLink, U_TradePlanInPut, U_RTFun, U_ZDYHelp, U_LabelPrint, U_TradeInspSet,
  U_TradePlanFtyInPut, U_AttachmentUpload, U_SysLogHelp, U_OrdImport;

{$R *.dfm}

procedure TfrmTradePlanList.InitImage(fwbid: string);
begin
  ADOQueryImage.close;
  if fwbid = '' then
    exit;
  with ADOQueryImage do
  begin
    close;
    sql.Clear;
    sql.Add('select * from TP_File A');
    sql.Add('where WBID=' + quotedstr(trim(fwbid)));
    open;
  end;
end;

procedure TfrmTradePlanList.SetStatus();
begin
  btnCopy.Visible := false;
  tbadd.Visible := false;
  TBEdit.Visible := False;
  TBDel.Visible := False;
  TBTJ.Visible := False;
  TBTJCX.Visible := False;
  tchk.Visible := false;
  tnochk.Visible := false;
  TWC.Visible := False;
  TNowc.Visible := False;
  TBDel.Visible := False;

  case cxTabControl1.TabIndex of
    0:
      begin
        tbadd.Visible := True;
        TBEdit.Visible := True;
        TBDel.Visible := True;
        TBDel.Visible := True;
        TBTJ.Visible := True;
        btnCopy.Visible := True;
      end;
    1:
      begin
        TBTJCX.Visible := True;
        btnCopy.Visible := True;
        TBDel.Visible := True;
        tchk.Visible := True;

      end;
    2:
      begin
        TWC.Visible := True;
        btnCopy.Visible := True;
        tnochk.Visible := True;
      end;
    3:
      begin
        TNowc.Visible := True;
        btnCopy.Visible := True;
      end;
  end;

end;

procedure TfrmTradePlanList.InitSub();
begin
  ADOQuerySub.Close;
  if Order_Main.IsEmpty then
    exit;
  ADOQuerySub.DisableControls;
  with ADOQuerySub do
  begin
    close;
    sql.Clear;
    sql.Add('select *,mxordqty=isnull((select sum(OrdRawQty) from  Trade_Plan_Sub_mx e where e.mainid=a.mainid and isnull(E.C_Pattern,'''')= isnull(A.C_Pattern,'''') AND isnull(E.C_ColorNo,'''')=isnull(A.C_ColorNo,'''') ),0)  ');
    sql.Add(' from Trade_Plan_Sub A');
    sql.Add('where mainid =' + quotedstr((Order_Main.fieldbyname('mainID').AsString)));
    open;
  end;
  SCreateCDS(ADOQuerySub, ORDER_SUB);
  SInitCDSData(ADOQuerySub, ORDER_SUB);

  ADOQuerySub.EnableControls;
  TV2.DataController.Filter.Clear;
end;

procedure TfrmTradePlanList.InitFty();
begin
  ADOQueryFty.Close;
  if Order_Main.IsEmpty then
    exit;
  ADOQueryFty.DisableControls;
  with ADOQueryFty do
  begin
    close;
    sql.Clear;

    sql.Add(' select SerialNo,FtyName,Technics,FtyQty=sum(FtyQty),MAINID   ');
    SQL.Add(',TPFID=(SELECT top 1 TPFID FROM Trade_Plan_Fty e where  e.mainid=a.mainid and ');
    SQL.Add('   isnull(e.SerialNo,0)=isnull(a.SerialNo,0) and isnull(e.FtyName,'''')=isnull(a.FtyName,'''')  )');
    sql.Add(' from Trade_Plan_Fty A where mainid =' + quotedstr((Order_Main.fieldbyname('mainID').AsString)));
    sql.Add(' group by SerialNo,Technics,FtyName,MAINID order by SerialNo ');


//    sql.Add('select *  ');
//    sql.Add(' from Trade_Plan_Fty_Technical A');
//    sql.Add('where mainid =' + quotedstr((Order_Main.fieldbyname('mainID').AsString)));
    open;
  end;
  SCreateCDS(ADOQueryFty, CDS_3);
  SInitCDSData(ADOQueryFty, CDS_3);

  ADOQueryFty.EnableControls;
  TV3.DataController.Filter.Clear;
end;

procedure TfrmTradePlanList.JGTypeChange(Sender: TObject);
begin
  InitGrid();
end;

procedure TfrmTradePlanList.FormDestroy(Sender: TObject);
begin
  inherited;
//  frmProductOrderList:=nil;
end;

procedure TfrmTradePlanList.FormClose(Sender: TObject; var Action: TCloseAction);
begin
  inherited;
  Action := caFree;
end;

procedure TfrmTradePlanList.FormCreate(Sender: TObject);
begin
  inherited;
  cxgrid1.Align := alClient;
  DQdate := SGetServerDate(ADOQueryTemp);

end;

procedure TfrmTradePlanList.TBCloseClick(Sender: TObject);
begin

  Close;

end;

procedure TfrmTradePlanList.InitGrid();
var
  STRwhere, Pwhere: string;
begin
  STRwhere := '';
  Pwhere := SGetFilters(Panel1, 1, 2);

  begin
    if trim(Pwhere) <> '' then
      STRwhere := STRwhere + ' and ' + trim(Pwhere);
  end;

  case cxTabControl1.TabIndex of
    0:
      begin
        STRwhere := STRwhere + ' and  isnull(status,''0'')=''0'' ';
      end;
    1:
      begin
        STRwhere := STRwhere + ' and  isnull(status,''0'')=''1'' ';
      end;
    2:
      begin
        STRwhere := STRwhere + ' and  isnull(status,''0'')=''9'' ';
      end;
    3:
      begin
        STRwhere := STRwhere + ' and  isnull(status,''0'')=''10'' ';
      end;
  end;

  try
    ADOQueryMain.DisableControls;

    with ADOQueryMain do
    begin
      Filtered := False;
      Close;
      sql.Clear;
      sql.add(' select  A.*,B.LabVolume,B.LabPackage            ');
      sql.add(',Technics=SUBSTRING(CAST((select distinct '','' +X.Technics from Trade_Plan_Fty X where X.MainId=A.MainId for xml path('''') ) AS VARCHAR(100)) , 2, 100)                         ');
      sql.add(',Follower=SUBSTRING(CAST((select distinct '','' +X.Follower from Trade_Plan_Fty X where X.MainId=A.MainId for xml path('''') ) AS VARCHAR(100)) , 2, 100)                         ');
      sql.add(',FtyName=SUBSTRING(CAST((select distinct '','' +X.FtyName from Trade_Plan_Fty X where X.MainId=A.MainId for xml path('''') ) AS VARCHAR(100)) , 2, 100)                         ');

      sql.add(' from V_Trade_Plan_Multiple1 A');
      sql.add(' left join Trade_Cloth_Inspect_Rule B on A.MainId=B.RuleID');
//      sql.add(' where OrdType=''大货单'' ');
      sql.add(' where OrdType in (''大货单'',''打样单'',''开发单'')');
      sql.add(' and A.OrdDate>=' + quotedstr(Trim(FormatDateTime('yyyy-MM-dd', frmFrameDateSel1.BegDate.Date))));
      sql.add(' and  A.OrdDate<' + quotedstr(Trim(FormatDateTime('yyyy-MM-dd', frmFrameDateSel1.enddate.Date + 1))));

      if canshu1 = '录入' then
      begin
        sql.Add(' and ( A.SalesId=' + quotedstr(trim(DCode)));
        sql.Add(' or A.Filler=' + quotedstr(trim(DName)));
        sql.Add(' or exists (select * from [dbo].[F_Tool_SplitString](A.TallyId,'','') X where X.RTValue =' + quotedstr(trim(DCode)) + '))');
      end;

      sql.add('     ' + STRwhere);

      sql.add(' order by  filltime desc');
//      ShowMessage(SQL.Text);
      Open;
    end;

    SCreateCDS(ADOQueryMain, Order_Main);
    SInitCDSData(ADOQueryMain, Order_Main);
  finally
    ADOQueryMain.EnableControls;
    TV1.DataController.Filter.Clear;

  end;
end;

procedure TfrmTradePlanList.SendMessageQR(MDateId, KeyWord1, KeyWord2, KeyWord3: string);
begin
  with ADOQueryTemp do
  begin
    Close;
    SQL.Clear;
    sql.Add('select distinct A.* from SY_User A inner join SY_Purview B on A.UserID=B.UserID  where A.Valid=''Y'' ');
    SQL.Add('and isnull(A.wxid,'''')<>''''');
    SQL.Add(' and exists(select 1 from SY_ModuleSub X where X.ModuleID=B.ModuleID and X.ModuleSubID=B.ModuleSubID and X.FormName=''生产计划单审核'' )');
//    showmessage(sql.text);
    Open;
  end;
  SCreateCDS(ADOQueryTemp, CDS_WXTS);
  SInitCDSData(ADOQueryTemp, CDS_WXTS);

  if CDS_WXTS.IsEmpty then
  begin
    Application.MessageBox('用户未绑定微信,提交失败！', '提示信息', 0);
    Exit;
  end;
  CDS_WXTS.First;
  while not CDS_WXTS.eof do
  begin
    with ADOQueryCmd do
    begin
      Close;
      SQL.Clear;
      SQL.Add('select * from WeixinMessage where 1<>1');
      Open;
      Append;
      FieldByName('MessageType').Value := 'OrderToAudit';
      FieldByName('MessageName').Value := '计划单待审核';
      FieldByName('Title').Value := '您有新的生产计划单待审核';
      FieldByName('URL').Value := 'subpages/plan/view?id=' + Trim(MDateId);
      FieldByName('OpenId').Value := Trim(CDS_WXTS.FieldByName('wxid').AsString);
      FieldByName('Status').Value := '0';
      FieldByName('CreateDate').Value := FormatDateTime('yyyymmdd', SGetServerDateTime(ADOQueryTemp));
      FieldByName('CreateTime').Value := FormatDateTime('HH:mm:ss', SGetServerDateTime(ADOQueryTemp));
      FieldByName('BusinessId').Value := Trim(MDateId);
      FieldByName('KeyWord1').Value := Trim(KeyWord1);
      FieldByName('KeyWord2').Value := Trim(KeyWord2);
      FieldByName('KeyWord3').Value := Trim(KeyWord3);
      FieldByName('Remark').Value := '点击可查询详情！';
      Post;
    end;
    CDS_WXTS.Next;
  end;

  GetHTTP('http://aotang.rightsoft.top/api/message/send/OrderToAudit');
end;

procedure TfrmTradePlanList.InitForm();
begin

  ReadCxGrid(trim(self.Caption) + 'Tv1', Tv1, '生产指示单管理');
  ReadCxGrid(trim(self.Caption) + 'Tv2', Tv2, '生产指示单管理');

  frmFrameDateSel1.BegDate.Date := SGetServerDate(ADOQueryTemp) - 180;
  frmFrameDateSel1.EndDate.Date := SGetServerDate(ADOQueryTemp);

  SetStatus();
  InitGrid();
end;

procedure TfrmTradePlanList.TBEditClick(Sender: TObject);
begin
  if Order_Main.IsEmpty then
    Exit;

//  if Trim(Order_Main.fieldbyname('Filler').AsString) <> Trim(DName) then
//  begin
//    Application.MessageBox('不能操作他人的数据!', '提示', 0);
//    Exit;
//  end;

  if not assigned(frmTradePlanInPut) then
  begin
    try
      frmTradePlanInPut := TfrmTradePlanInPut.Create(Application);
      with frmTradePlanInPut do
      begin

        PState := 1;
        FMainId := Trim(Self.Order_Main.fieldbyname('MainId').AsString);
        FOrderNo := Trim(Self.Order_Main.fieldbyname('OrderNo').AsString);
        canshu1 := self.canshu1;
        show;
//        if ShowModal = 1 then
//        begin
//
//        end;
      end;
    finally
//      frmTradePlanInPut.Free;
    end;
  end
  else
  begin
    frmTradePlanInPut.WindowState := wsMaximized;
    frmTradePlanInPut.Show;
  end;

end;

procedure TfrmTradePlanList.TBDelClick(Sender: TObject);
var
  rtvalues: TArray<string>;
begin
  if Order_Main.IsEmpty then
    exit;

  rtvalues := SelCDSKey(Order_Main, ['MainId', 'OrderNo', 'MasterOrderNo']);

//  with ADOQueryTemp do
//  begin
//    close;
//    sql.Clear;
//    sql.Add('select * from  Trade_Plan_Main A ');
//    sql.Add(' where EXISTS(select X.RTValue from [dbo].[F_Tool_SplitString](' + QuotedStr(rtvalues[0]) + ','','') X where A.MainId=X.RTValue )  ');
//    sql.Add(' and Filler<>' + QuotedStr(Trim(Order_Main.fieldbyname('Filler').AsString)));
//    open;
//  end;
//  if not ADOQueryTemp.IsEmpty then
//  begin
//    Application.MessageBox('不能操作他人的数据!', '提示', 0);
//    Exit;
//  end;

  with ADOQueryTemp do
  begin
    Close;
    sql.Clear;
    sql.Add('select * from Trade_Cloth_Inspect where isnull(mainID,'''')<>''''  ');
    sql.Add(' and EXISTS(select X.RTValue from [dbo].[F_Tool_SplitString](' + QuotedStr(rtvalues[0]) + ','','') X where Trade_Cloth_Inspect.MainId=X.RTValue )  ');
    Open;
  end;
  if ADOQueryTemp.IsEmpty = False then
  begin
    Application.MessageBox('已检验不能删除数据!', '提示', 0);
    Exit;
  end;

  with ADOQueryTemp do
  begin
    Close;
    sql.Clear;
    sql.Add('select * from Trade_Plan_Card where isnull(mainID,'''')<>''''  ');
    sql.Add(' and EXISTS(select X.RTValue from [dbo].[F_Tool_SplitString](' + QuotedStr(rtvalues[0]) + ','','') X where Trade_Plan_Card.MainId=X.RTValue )  ');
    Open;
  end;
  if ADOQueryTemp.IsEmpty = False then
  begin
    Application.MessageBox('已打标不能删除数据!', '提示', 0);
    Exit;
  end;

  with ADOQueryTemp do
  begin
    Close;
    sql.Clear;
    sql.Add('select * from Bs_Cloth_IO where isnull(FromMasterOrdNo,'''')<>''''  ');
    sql.Add(' and EXISTS(select X.RTValue from [dbo].[F_Tool_SplitString](' + QuotedStr(rtvalues[2]) + ','','') X where Bs_Cloth_IO.FromMasterOrdNo=X.RTValue )  ');
    Open;
  end;
  if ADOQueryTemp.IsEmpty = False then
  begin
    Application.MessageBox('已入库不能删除数据!', '提示', 0);
    Exit;
  end;

  if Application.MessageBox('确定要删除数据吗？', '提示', 32 + 4) <> IDYES then
    Exit;

  with ADOQueryCmd do
  begin
    Close;
    sql.Clear;
    sql.Add('delete Trade_Plan_Main ');
    sql.Add('where EXISTS(select X.RTValue from [dbo].[F_Tool_SplitString](' + QuotedStr(rtvalues[0]) + ','','') X where Trade_Plan_Main.MainId=X.RTValue )  ');

    sql.Add('delete Trade_Plan_Sub ');
    sql.Add('where EXISTS(select X.RTValue from [dbo].[F_Tool_SplitString](' + QuotedStr(rtvalues[0]) + ','','') X where Trade_Plan_Sub.MainId=X.RTValue )  ');

    sql.Add('delete Trade_Plan_Fty ');
    sql.Add('where EXISTS(select X.RTValue from [dbo].[F_Tool_SplitString](' + QuotedStr(rtvalues[0]) + ','','') X where Trade_Plan_Fty.MainId=X.RTValue )  ');

    sql.Add('insert into SY_SysLog(operor,opertime,Model,acction,opevent,result) values( ');
    sql.Add(' ' + quotedstr(trim(DName)));
    sql.Add(',getdate() ');
    sql.Add(',' + quotedstr(trim(self.Caption)));
    sql.Add(',' + quotedstr(trim('指示单删除')));
    sql.Add(',' + quotedstr(trim('指示单号：' + trim(rtvalues[1]))));
    sql.Add(',' + quotedstr(trim('成功')));
    sql.Add(')');
    ExecSQL;
  end;

  InitGrid();
end;

procedure TfrmTradePlanList.TBPrintClick(Sender: TObject);
begin
  if Order_Main.IsEmpty then
    Exit;
  if CDS_3.IsEmpty then
    EXIT;

  try
    frmLabelPrint := TfrmLabelPrint.Create(Application);
    with frmLabelPrint do
    begin
      FLMType := 'TradePlanPrint';
      FFiltration1 := Trim(CDS_3.fieldbyname('TPFID').AsString);
      if ShowModal = 1 then
      begin
//        Self.InitGrid();
      end;
    end;
  finally
    frmLabelPrint.Free;
  end;
end;

procedure TfrmTradePlanList.TBRafreshClick(Sender: TObject);
begin
  ToolBar1.SetFocus;
  InitGrid();
end;

procedure TfrmTradePlanList.TBAddClick(Sender: TObject);
begin
  if not assigned(frmTradePlanInPut) then
  begin
    try
      frmTradePlanInPut := TfrmTradePlanInPut.Create(Application);
      with frmTradePlanInPut do
      begin
        PState := 0;
        FMainId := '';
        canshu1 := self.canshu1;
        show;
      //  if  then
       // begin
      //    InitGrid();
     //   end;
      end;
    finally
    //  frmTradePlanInPut.Free;
    end;
  end
  else
  begin
    frmTradePlanInPut.WindowState := wsMaximized;
    frmTradePlanInPut.Show;
  end;
end;

procedure TfrmTradePlanList.OrderNoMChange(Sender: TObject);
begin
  if ADOQueryMain.Active = False then
    Exit;
  SDofilter(ADOQueryMain, SGetFilters(Panel1, 1, 2));
  SCreateCDS(ADOQueryMain, Order_Main);
  SInitCDSData(ADOQueryMain, Order_Main);
end;

procedure TfrmTradePlanList.FormShow(Sender: TObject);
begin
  inherited;
  canshu1 := self.fParameters1;
  fFlileFlag := UserDataFlag + 'HX';
  cxTabControl1.TabIndex := 0;
  InitForm();
end;

procedure TfrmTradePlanList.TBTPClick(Sender: TObject);
var
  FQty, FQty1, FMxQty, FPQty, FMxQtyS, FPQtyS: string;
begin
end;

procedure TfrmTradePlanList.CheckBox1Click(Sender: TObject);
begin
  InitGrid();
end;

procedure TfrmTradePlanList.CheckBox2Click(Sender: TObject);
begin
  TBRafresh.Click;
end;

procedure TfrmTradePlanList.Tv1StylesGetContentStyle(Sender: TcxCustomGridTableView; ARecord: TcxCustomGridRecord; AItem: TcxCustomGridTableItem; out AStyle: TcxStyle);
var
  id, id10: Integer;
begin
  {try
    if Tv1.GroupedItemCount=0 then
    begin
      Id:=Tv1.GetColumnByFieldName('DeliveryDate').Index-tv1.GroupedItemCount;
      Id10:=Tv1.GetColumnByFieldName('SubStatus').Index-tv1.GroupedItemCount;
      if Trim(VarToStr(ARecord.Values[id]))='' then Exit;
      if Id<0 then Exit;
      if ARecord.Values[id10]='完成' then exit;
      if (ARecord.Values[id]-DQdate)>=4 then Exit;
      if ((ARecord.Values[id]-DQdate)>=0) and ((ARecord.Values[id]-DQdate)<4) then
        AStyle:=DataLink_.QHuangSe
      else
      if ARecord.Values[id]-DQdate<0 then
      begin
        AStyle:=DataLink_OrderManage.FenHongS;
      end;
    end else
    begin

    end;
  except
  end; }
end;

procedure TfrmTradePlanList.TV2Column5PropertiesEditValueChanged(Sender: TObject);
var
  FBatchNo: string;
begin
  FBatchNo := TcxTextEdit(Sender).EditingText;
  try
    with ADOQueryCmd do
    begin
      Close;
      sql.Clear;
      sql.Add(' update Trade_Plan_Sub   ');
      sql.Add(' set  Sub_BatchNo=' + FBatchNo);
      sql.Add('where SubId =' + quotedstr((ORDER_SUB.fieldbyname('SubId').AsString)));
//      showmessage(sql.text);
      ExecSQL;
    end;
    ModalResult := 1;
  except
    application.MessageBox(PChar(Exception(ExceptObject).Message), '提示信息', 0);

  end;

end;

procedure TfrmTradePlanList.TV2CustomDrawCell(Sender: TcxCustomGridTableView; ACanvas: TcxCanvas; AViewInfo: TcxGridTableDataCellViewInfo; var ADone: Boolean);
begin
  if AViewInfo.GridRecord.Values[v1PRTOrderQty.Index] <> AViewInfo.GridRecord.Values[TV2Column6.Index] then
    ACanvas.Brush.Color := $008080FF;
end;

procedure TfrmTradePlanList.v1DeliveryDateCustomDrawCell(Sender: TcxCustomGridTableView; ACanvas: TcxCanvas; AViewInfo: TcxGridTableDataCellViewInfo; var ADone: Boolean);
begin
 { Id:=TV1.GetColumnByFieldName('DeliveryDate').Index;//;-TV1.GroupedItemCount;
  Id10:=TV1.GetColumnByFieldName('SubStatus').Index;
  if Id<0 then Exit;
  if AViewInfo.GridRecord.Values[Id10]='完成' then Exit;
  if AViewInfo.GridRecord.Values[Id]-SGetServerDate(ADOQueryTemp)>=4 then Exit;
  if ((AViewInfo.GridRecord.Values[id]-SGetServerDate(ADOQueryTemp))>=0) and ((AViewInfo.GridRecord.Values[id]-SGetServerDate(ADOQueryTemp))<4) then
    ACanvas.Brush.Color:=clYellow
  else
  if (AViewInfo.GridRecord.Values[id])-(SGetServerDate(ADOQueryTemp)<0) then
  begin
    ACanvas.Brush.Color:=clRed;
  end;
  begin
    ACanvas.Brush.Color:=clRed;
  end else
  if AViewInfo.GridRecord.Values[Id]='Purple' then
  begin
    ACanvas.Brush.Color:=clPurple;
  end else
  if AViewInfo.GridRecord.Values[Id]='Olive' then
  begin
    ACanvas.Brush.Color:=clOlive;
  end else
  if AViewInfo.GridRecord.Values[Id]='Teal' then
  begin
    ACanvas.Brush.Color:=clTeal;
  end else
  if AViewInfo.GridRecord.Values[Id]='Background' then
  begin
    ACanvas.Brush.Color:=clBackground;
  end;   }
end;

procedure TfrmTradePlanList.TBCKClick(Sender: TObject);
begin
  if Order_Main.IsEmpty then
    Exit;
  if not assigned(frmTradePlanInPut) then
  begin
    try
      frmTradePlanInPut := TfrmTradePlanInPut.Create(Application);
      with frmTradePlanInPut do
      begin
        PState := 1;
        FMainId := Trim(Self.Order_Main.fieldbyname('MainId').AsString);
//        tlb2.Enabled := FALSE;
        TBSave.Visible := False;
        ScrollBox1.Enabled := True;
        N2.Visible := False;
        show;
      //  if  then
       // begin
      //    InitGrid();
     //   end;
      end;
    finally
    //  frmTradePlanInPut.Free;
    end;
  end
  else
  begin
    frmTradePlanInPut.WindowState := wsMaximized;
    frmTradePlanInPut.Show;
  end;

end;

procedure TfrmTradePlanList.btnCopyClick(Sender: TObject);
begin
  if Order_Main.IsEmpty then
    Exit;
  if not assigned(frmTradePlanInPut) then
  begin
    try
      frmTradePlanInPut := TfrmTradePlanInPut.Create(Application);
      with frmTradePlanInPut do
      begin
        PState := 1;
        CopyInt := 99;
        FMainId := Trim(Self.Order_Main.fieldbyname('MainId').AsString);
        canshu1 := self.canshu1;
        show;
      //  if  then
       // begin
      //    InitGrid();
     //   end;
      end;
    finally
    //  frmTradePlanInPut.Free;
    end;
  end
  else
  begin
    frmTradePlanInPut.WindowState := wsMaximized;
    frmTradePlanInPut.Show;
  end;

end;

procedure TfrmTradePlanList.OrderNoKeyPress(Sender: TObject; var Key: Char);
begin

  if Key = #13 then
  begin
    initgrid();
  end;
end;

procedure TfrmTradePlanList.Tv1CellDblClick(Sender: TcxCustomGridTableView; ACellViewInfo: TcxGridTableDataCellViewInfo; AButton: TMouseButton; AShift: TShiftState; var AHandled: Boolean);
begin
  CopyTVFocusValue(TV1);
end;

procedure TfrmTradePlanList.Tv1FocusedRecordChanged(Sender: TcxCustomGridTableView; APrevFocusedRecord, AFocusedRecord: TcxCustomGridRecord; ANewItemRecordFocusingChanged: Boolean);
begin
  InitSub();
  InitFty();
end;

procedure TfrmTradePlanList.ToolButton4Click(Sender: TObject);
begin
  if Order_Main.IsEmpty then
    Exit;
  try
    frmAttachmentUpload := TfrmAttachmentUpload.Create(Application);
    with frmAttachmentUpload do
    begin
      if Trim(canshu1) <> '查询' then
        FEditAuthority := True;
      fkeyNO := Trim(Self.Order_Main.fieldbyname('MainId').AsString);
      fType := '指示单';
      if ShowModal = 1 then
      begin

      end;
    end;
  finally
    frmAttachmentUpload.Free;
  end;
end;

procedure TfrmTradePlanList.ToolButton5Click(Sender: TObject);
begin
  try
    frmTradePlanFtyInPut := TfrmTradePlanFtyInPut.Create(Application);
    with frmTradePlanFtyInPut do
    begin
      FMainId := Trim(Self.Order_Main.fieldbyname('MainId').AsString);
      if ShowModal = 1 then
      begin
        InitFty();
      end;

    end;
  finally
    frmTradePlanFtyInPut.Free;
  end;
end;

procedure TfrmTradePlanList.ToolButton6Click(Sender: TObject);
begin
  try
    frmOrdImport := TfrmOrdImport.Create(Application);
    with frmOrdImport do
    begin

      if ShowModal = 1 then
      begin
        self.InitGrid();
      end;
    end;
  finally
    frmOrdImport.Free;
  end;
end;

procedure TfrmTradePlanList.cxTabControl1Change(Sender: TObject);
begin
  SetStatus();
  InitGrid();
end;

procedure TfrmTradePlanList.TchkClick(Sender: TObject);
var
  rtvalues: TArray<string>;
begin
  if Order_Main.IsEmpty then
    exit;
  if cxTabControl1.TabIndex <> 1 then
  begin
    Application.MessageBox('只能在待审核状态下进行审核操作!', '提示', 0);
    Exit;
  end;
  rtvalues := SelCDSKey(Order_Main, ['MainId', 'OrderNo']);
  if Application.MessageBox('是否核实好数据？', '提示', 32 + 4) <> IDYES then
    Exit;
  try
    with ADOQueryCmd do
    begin
      close;
      sql.Clear;
      sql.Add('update  Trade_Plan_Main SET status=''9'',chker=''' + trim(DName) + ''',Chktime=getdate() ');
      sql.Add('where EXISTS(select X.RTValue from [dbo].[F_Tool_SplitString](' + QuotedStr(rtvalues[0]) + ','','') X where Trade_Plan_Main.MainId=X.RTValue )  ');

      sql.Add('insert into SY_SysLog(operor,opertime,Model,acction,opevent,result) values( ');
      sql.Add(' ' + quotedstr(trim(DName)));
      sql.Add(',getdate() ');
      sql.Add(',' + quotedstr(trim(self.Caption)));
      sql.Add(',' + quotedstr(trim('计划单审核')));
      sql.Add(',' + quotedstr(trim('计划单号：' + trim(rtvalues[1]))));
      sql.Add(',' + quotedstr(trim('成功')));
      sql.Add(')');
      execsql;
    end;

  except
    application.MessageBox('计划单审核失败！', '提示信息', 0);
  end;
  TBRafresh.Click;
end;

procedure TfrmTradePlanList.TnochkClick(Sender: TObject);
var
  rtvalues: TArray<string>;
begin
  if Order_Main.IsEmpty then
    exit;
  if cxTabControl1.TabIndex <> 2 then
  begin
    Application.MessageBox('只能在已审核状态下进行审核操作!', '提示', 0);
    Exit;
  end;
  rtvalues := SelCDSKey(Order_Main, ['MainId', 'OrderNo']);
  try
    with ADOQueryCmd do
    begin
      close;
      sql.Clear;
      sql.Add('update  Trade_Plan_Main SET status=''0'',chker=null,Chktime=null ');
      sql.Add('where EXISTS(select X.RTValue from [dbo].[F_Tool_SplitString](' + QuotedStr(rtvalues[0]) + ','','') X where Trade_Plan_Main.MainId=X.RTValue )  ');

      sql.Add('insert into SY_SysLog(operor,opertime,Model,acction,opevent,result) values( ');
      sql.Add(' ' + quotedstr(trim(DName)));
      sql.Add(',getdate() ');
      sql.Add(',' + quotedstr(trim(self.Caption)));
      sql.Add(',' + quotedstr(trim('计划单撤销审核')));
      sql.Add(',' + quotedstr(trim('计划单号：' + trim(rtvalues[1]))));
      sql.Add(',' + quotedstr(trim('成功')));
      sql.Add(')');
      execsql;
    end;
    TBRafresh.Click;
  except
    application.MessageBox('计划单撤销审核失败！', '提示信息', 0);
  end;
end;

procedure TfrmTradePlanList.TWCClick(Sender: TObject);
var
  rtvalues: TArray<string>;
begin
  if Order_Main.IsEmpty then
    exit;

  rtvalues := SelCDSKey(Order_Main, ['MainId', 'OrderNo']);

  if canshu1 <> '管理' then
  begin
    with ADOQueryTemp do
    begin
      close;
      sql.Clear;
      sql.Add('select * from  Trade_Plan_Main A ');
      sql.Add(' where EXISTS(select X.RTValue from [dbo].[F_Tool_SplitString](' + QuotedStr(rtvalues[0]) + ','','') X where A.MainId=X.RTValue )  ');
      sql.Add(' and Filler<>' + QuotedStr(Trim(Order_Main.fieldbyname('Filler').AsString)));
      open;
    end;
    if not ADOQueryTemp.IsEmpty then
    begin
      Application.MessageBox('不能操作他人的数据!', '提示', 0);
      Exit;
    end;
  end;

  if Application.MessageBox('是否核实好数据？', '提示', 32 + 4) <> IDYES then
    Exit;
  try
    with ADOQueryCmd do
    begin
      close;
      sql.Clear;
      sql.Add('update  Trade_Plan_Main SET status=''10'' ');
      sql.Add('where EXISTS(select X.RTValue from [dbo].[F_Tool_SplitString](' + QuotedStr(rtvalues[0]) + ','','') X where Trade_Plan_Main.MainId=X.RTValue )  ');

      sql.Add('insert into SY_SysLog(operor,opertime,Model,acction,opevent,result) values( ');
      sql.Add(' ' + quotedstr(trim(DName)));
      sql.Add(',getdate() ');
      sql.Add(',' + quotedstr(trim(self.Caption)));
      sql.Add(',' + quotedstr(trim('计划单完成')));
      sql.Add(',' + quotedstr(trim('计划单号：' + trim(rtvalues[1]))));
      sql.Add(',' + quotedstr(trim('成功')));
      sql.Add(')');
      execsql;
    end;

    application.MessageBox('计划单完成成功！', '提示信息');
    TBRafresh.Click;
  except
    application.MessageBox('计划单完成失败！', '提示信息', 0);
  end;
end;

procedure TfrmTradePlanList.TNowcClick(Sender: TObject);
var
  rtvalues: TArray<string>;
begin
  if Order_Main.IsEmpty then
    exit;

  rtvalues := SelCDSKey(Order_Main, ['MainId', 'OrderNo']);
  if canshu1 <> '管理' then
  begin
    with ADOQueryTemp do
    begin
      close;
      sql.Clear;
      sql.Add('select * from  Trade_Plan_Main A ');
      sql.Add(' where EXISTS(select X.RTValue from [dbo].[F_Tool_SplitString](' + QuotedStr(rtvalues[0]) + ','','') X where A.MainId=X.RTValue )  ');
      sql.Add(' and Filler<>' + QuotedStr(Trim(Order_Main.fieldbyname('Filler').AsString)));
      open;
    end;
    if not ADOQueryTemp.IsEmpty then
    begin
      Application.MessageBox('不能操作他人的数据!', '提示', 0);
      Exit;
    end;
  end;
  if Application.MessageBox('是否核实好数据？', '提示', 32 + 4) <> IDYES then
    Exit;
  try
    with ADOQueryCmd do
    begin
      close;
      sql.Clear;
      sql.Add('update  Trade_Plan_Main SET status=''9'' ');
      sql.Add('where EXISTS(select X.RTValue from [dbo].[F_Tool_SplitString](' + QuotedStr(rtvalues[0]) + ','','') X where Trade_Plan_Main.MainId=X.RTValue )  ');

      sql.Add('insert into SY_SysLog(operor,opertime,Model,acction,opevent,result) values( ');
      sql.Add(' ' + quotedstr(trim(DName)));
      sql.Add(',getdate() ');
      sql.Add(',' + quotedstr(trim(self.Caption)));
      sql.Add(',' + quotedstr(trim('计划单撤销完成')));
      sql.Add(',' + quotedstr(trim('计划单号：' + trim(rtvalues[1]))));
      sql.Add(',' + quotedstr(trim('成功')));
      sql.Add(')');
      execsql;
    end;
    application.MessageBox('计划单撤销完成成功！', '提示信息');
    TBRafresh.Click;
  except
    application.MessageBox('计划单撤销完成失败！', '提示信息', 0);
  end;
end;

procedure TfrmTradePlanList.TBTJClick(Sender: TObject);
var
  rtvalues: TArray<string>;
begin
  if Order_Main.IsEmpty then
    exit;
  if cxTabControl1.TabIndex <> 0 then
  begin
    Application.MessageBox('只能在待提交状态下进行提交操作!', '提示', 0);
    Exit;
  end;

  rtvalues := SelCDSKey(Order_Main, ['MainId', 'OrderNo']);

  if canshu1 <> '管理' then
  begin
    with ADOQueryTemp do
    begin
      close;
      sql.Clear;
      sql.Add('select * from  Trade_Plan_Main A ');
      sql.Add(' where EXISTS(select X.RTValue from [dbo].[F_Tool_SplitString](' + QuotedStr(rtvalues[0]) + ','','') X where A.MainId=X.RTValue )  ');
      sql.Add(' and Filler<>' + QuotedStr(Trim(Order_Main.fieldbyname('Filler').AsString)));
      open;
    end;
    if not ADOQueryTemp.IsEmpty then
    begin
      Application.MessageBox('不能操作他人的数据!', '提示', 0);
      Exit;
    end;
  end;

  if Application.MessageBox('确定要提交数据吗？', '提示', 32 + 4) <> IDYES then
    Exit;
  try
    with ADOQueryCmd do
    begin
      close;
      sql.Clear;
      sql.Add('update  Trade_Plan_Main SET status=''1'' ');
      sql.Add('where EXISTS(select X.RTValue from [dbo].[F_Tool_SplitString](' + QuotedStr(rtvalues[0]) + ','','') X where Trade_Plan_Main.MainId=X.RTValue )  ');

      sql.Add('insert into SY_SysLog(operor,opertime,Model,acction,opevent,result) values( ');
      sql.Add(' ' + quotedstr(trim(DName)));
      sql.Add(',getdate() ');
      sql.Add(',' + quotedstr(trim(self.Caption)));
      sql.Add(',' + quotedstr(trim('计划单提交')));
      sql.Add(',' + quotedstr(trim('计划单号：' + trim(rtvalues[1]))));
      sql.Add(',' + quotedstr(trim('成功')));
      sql.Add(')');
      execsql;
    end;
    application.MessageBox('计划单提交成功！', '提示信息');

  except
    application.MessageBox('计划单提交失败！', '提示信息', 0);
  end;

  //    SendMessageQR(trim(Order_Main.FieldByName('mainid').AsString), trim(Order_Main.FieldByName('Filler').AsString), trim(Order_Main.FieldByName('orderNO').AsString), Trim(FormatDateTime('yyyy-MM-dd', Order_Main.FieldByName('OrdDate').asdatetime)));
//    with ADOQueryCmd do
//    begin
//      close;
//      sql.Clear;
//      sql.Add('exec P_MSG_in ');
//      sql.Add(' @MSG=' + QuotedStr(trim('计划单号：' + trim(Order_Main.FieldByName('orderNO').AsString) + ' 需要审核')));
//      sql.Add(',@FillUserid=' + QuotedStr(trim(DCode)));
//      sql.Add(',@FillUserName=' + QuotedStr(trim(DName)));
//      sql.Add(',@FillType=' + QuotedStr(trim('需要确认')));
//      sql.Add(',@MegType=' + QuotedStr(trim('计划单提交')));
//      execsql;
//    end;
  TBRafresh.Click;
end;

procedure TfrmTradePlanList.TBTJCXClick(Sender: TObject);
var
  rtvalues: TArray<string>;
begin
  if Order_Main.IsEmpty then
    exit;
  if cxTabControl1.TabIndex <> 1 then
  begin
    Application.MessageBox('只能在待审核状态下进行提交撤销操作!', '提示', 0);
    Exit;
  end;

  rtvalues := SelCDSKey(Order_Main, ['MainId', 'OrderNo']);

  if canshu1 <> '管理' then
  begin
    with ADOQueryTemp do
    begin
      close;
      sql.Clear;
      sql.Add('select * from  Trade_Plan_Main A ');
      sql.Add(' where EXISTS(select X.RTValue from [dbo].[F_Tool_SplitString](' + QuotedStr(rtvalues[0]) + ','','') X where A.MainId=X.RTValue )  ');
      sql.Add(' and Filler<>' + QuotedStr(Trim(Order_Main.fieldbyname('Filler').AsString)));
      open;
    end;
    if not ADOQueryTemp.IsEmpty then
    begin
      Application.MessageBox('不能操作他人的数据!', '提示', 0);
      Exit;
    end;
  end;

  if Application.MessageBox('确定要撤销提交数据吗？', '提示', 32 + 4) <> IDYES then
    Exit;
  try
    with ADOQueryCmd do
    begin
      close;
      sql.Clear;
      sql.Add('update  Trade_Plan_Main SET status=''0''  ');
      sql.Add('where EXISTS(select X.RTValue from [dbo].[F_Tool_SplitString](' + QuotedStr(rtvalues[0]) + ','','') X where Trade_Plan_Main.MainId=X.RTValue )  ');
      sql.Add(' and isnull(status,''0'')=''1'' ');

      sql.Add('insert into SY_SysLog(operor,opertime,Model,acction,opevent,result) values( ');
      sql.Add(' ' + quotedstr(trim(DName)));
      sql.Add(',getdate() ');
      sql.Add(',' + quotedstr(trim(self.Caption)));
      sql.Add(',' + quotedstr(trim('计划单提交撤销')));
      sql.Add(',' + quotedstr(trim('计划单号：' + trim(rtvalues[1]))));
      sql.Add(',' + quotedstr(trim('成功')));
      sql.Add(')');
      execsql;
    end;
    application.MessageBox('计划单提交撤销成功！', '提示信息');
    TBRafresh.Click;
  except
    application.MessageBox('计划单提交撤销失败！', '提示信息', 0);
  end;
end;

procedure TfrmTradePlanList.N1Click(Sender: TObject);
begin
  CopyTVFocusValue(TV1);
end;

procedure TfrmTradePlanList.N2Click(Sender: TObject);
begin
  CopyTVFocusValue(TV2);
end;

procedure TfrmTradePlanList.N3Click(Sender: TObject);
begin
  SelOKNoFiler(Tv1, True); //全选
end;

procedure TfrmTradePlanList.N4Click(Sender: TObject);
begin
  SelOKNoFiler(Tv1, False); //全弃
end;

procedure TfrmTradePlanList.N5Click(Sender: TObject);
begin
  SelOKNo(Order_Main, True);
end;

procedure TfrmTradePlanList.N6Click(Sender: TObject);
begin
  SelOKNo(Order_Main, False);
end;

procedure TfrmTradePlanList.ComboBox1Change(Sender: TObject);
begin
  InitGrid();
end;

procedure TfrmTradePlanList.CustomerNoNameKeyPress(Sender: TObject; var Key: Char);
begin
  if Key = #13 then
  begin
    InitGrid();
  end;
end;

procedure TfrmTradePlanList.ToolButton10Click(Sender: TObject);
begin
  WriteCxGrid('指示单列表FF1', Tv1, '生产指示单管理');
  WriteCxGrid('指示单列表FFTv21', Tv2, '生产指示单管理6');
  application.MessageBox('保存成功！', '提示信息', 0);
end;

procedure TfrmTradePlanList.ToolButton1Click(Sender: TObject);
begin
  try
    frmTradeInspSet := TfrmTradeInspSet.Create(Application);
    with frmTradeInspSet do
    begin

      FDataID := Trim(Self.Order_Main.fieldbyname('MainId').AsString);

      if ShowModal = 1 then
      begin

      end;
    end;
  finally
    frmTradeInspSet.Free;
  end;
end;

procedure TfrmTradePlanList.ToolButton2Click(Sender: TObject);
begin
  WriteCxGrid(trim(self.Caption) + 'Tv1', Tv1, '生产指示单管理');
  WriteCxGrid(trim(self.Caption) + 'Tv2', Tv2, '生产指示单管理');
end;

procedure TfrmTradePlanList.ToolButton3Click(Sender: TObject);
begin
  try
    frmSysLogHelp := TfrmSysLogHelp.Create(Application);
    with frmSysLogHelp do
    begin

      if ShowModal = 1 then
      begin

      end;
    end;
  finally
    frmSysLogHelp.Free;
  end;
end;

end.