unit U_ShaRKList;

interface

uses
  Windows, Messages, SysUtils, Variants, Classes, Graphics, Controls, Forms,
  Dialogs, cxStyles, cxCustomData, cxGraphics, cxFilter, cxData,
  cxDataStorage, cxEdit, DB, cxDBData, cxGridCustomTableView,
  cxGridTableView, cxGridBandedTableView, cxGridDBBandedTableView,
  cxGridLevel, cxClasses, cxControls, cxGridCustomView, cxGridDBTableView,
  cxGrid, StdCtrls, ComCtrls, ExtCtrls, ToolWin, cxGridCustomPopupMenu,
  cxGridPopupMenu, ADODB, DBClient, cxDropDownEdit, cxCheckBox, RM_Common,
  RM_Class, RM_e_Xls, RM_Dataset, RM_System, RM_GridReport, Menus,
  cxCalendar, cxButtonEdit, cxTextEdit, cxPC,IniFiles,jpeg,U_SLT,
  cxLookAndFeels, cxLookAndFeelPainters, cxNavigator, dxBarBuiltInMenu;

type
  TfrmShaRKList = class(TForm)
    ToolBar1: TToolBar;
    TBRafresh: TToolButton;
    TBFind: TToolButton;
    TBExport: TToolButton;
    TBClose: TToolButton;
    Panel1: TPanel;
    ADOQueryCmd: TADOQuery;
    ADOQueryMain: TADOQuery;
    ADOQueryTemp: TADOQuery;
    DataSource1: TDataSource;
    cxGridPopupMenu1: TcxGridPopupMenu;
    Label1: TLabel;
    Label2: TLabel;
    BegDate: TDateTimePicker;
    EndDate: TDateTimePicker;
    CDS_Main: TClientDataSet;
    RM1: TRMGridReport;
    RMDBMain: TRMDBDataSet;
    RMXLSExport1: TRMXLSExport;
    RMDBHZ: TRMDBDataSet;
    CDS_HZ: TClientDataSet;
    CDS_PRT: TClientDataSet;
    TBDel: TToolButton;
    PopupMenu1: TPopupMenu;
    N1: TMenuItem;
    N2: TMenuItem;
    TBRKHC: TToolButton;
    TBEdit: TToolButton;
    Label3: TLabel;
    Label4: TLabel;
    Label5: TLabel;
    Label8: TLabel;
    Label12: TLabel;
    SPName: TEdit;
    FactoryName: TEdit;
    SPID: TEdit;
    SPSpec: TEdit;
    CRType: TComboBox;
    Label6: TLabel;
    SPCF: TEdit;
    Label7: TLabel;
    PBNO: TEdit;
    cxGrid2: TcxGrid;
    Tv1: TcxGridDBTableView;
    v1Column6: TcxGridDBColumn;
    v1Column2: TcxGridDBColumn;
    v1Column4: TcxGridDBColumn;
    v1Column13: TcxGridDBColumn;
    v1Column14: TcxGridDBColumn;
    v2Column1: TcxGridDBColumn;
    v1Column8: TcxGridDBColumn;
    v1Column7: TcxGridDBColumn;
    v1Column11: TcxGridDBColumn;
    v1Column9: TcxGridDBColumn;
    v2Column6: TcxGridDBColumn;
    v1Column3: TcxGridDBColumn;
    v1Column5: TcxGridDBColumn;
    v1Column12: TcxGridDBColumn;
    cxGrid2Level1: TcxGridLevel;
    v1Column16: TcxGridDBColumn;
    v1Column1: TcxGridDBColumn;
    Label11: TLabel;
    FromFactoryName: TEdit;
    v1Column10: TcxGridDBColumn;
    Label9: TLabel;
    ToFactoryName: TEdit;
    v1Column15: TcxGridDBColumn;
    v1Column17: TcxGridDBColumn;
    v1Column18: TcxGridDBColumn;
    Label10: TLabel;
    SXPinPai: TEdit;
    TBZF: TToolButton;
    cxTabControl1: TcxTabControl;
    Label13: TLabel;
    BatchNo: TEdit;
    ToolButton1: TToolButton;
    TBRKQC: TToolButton;
    TBRKZD: TToolButton;
    TBRKCGJG: TToolButton;
    GroupBox1: TGroupBox;
    ScrollBox1: TScrollBox;
    ToolButton2: TToolButton;
    adoqueryPicture: TADOQuery;
    v1Column19: TcxGridDBColumn;
    v1Column20: TcxGridDBColumn;
    CDS_MX: TClientDataSet;
    DSMX: TDataSource;
    cxGridPopupMenu2: TcxGridPopupMenu;
    cxGrid1: TcxGrid;
    TvMX: TcxGridDBTableView;
    cxGridDBColumn7: TcxGridDBColumn;
    cxGridDBColumn8: TcxGridDBColumn;
    cxGridLevel2: TcxGridLevel;
    ToolButton3: TToolButton;
    vMXColumn1: TcxGridDBColumn;
    v1Column21: TcxGridDBColumn;
    PopupMenu2: TPopupMenu;
    N3: TMenuItem;
    N4: TMenuItem;
    v1Column22: TcxGridDBColumn;
    procedure FormDestroy(Sender: TObject);
    procedure FormClose(Sender: TObject; var Action: TCloseAction);
    procedure FormCreate(Sender: TObject);
    procedure TBRafreshClick(Sender: TObject);
    procedure ConNoMChange(Sender: TObject);
    procedure TBCloseClick(Sender: TObject);
    procedure FormShow(Sender: TObject);
    procedure TBExportClick(Sender: TObject);
    procedure TBFindClick(Sender: TObject);
    procedure N1Click(Sender: TObject);
    procedure N2Click(Sender: TObject);
    procedure TBDelClick(Sender: TObject);
    procedure TBRKHCClick(Sender: TObject);
    procedure TBEditClick(Sender: TObject);
    procedure SPIDKeyPress(Sender: TObject; var Key: Char);
    procedure SPIDChange(Sender: TObject);
    procedure SPSpecChange(Sender: TObject);
    procedure FactoryNameChange(Sender: TObject);
    procedure TBZFClick(Sender: TObject);
    procedure cxTabControl1Change(Sender: TObject);
    procedure BatchNoKeyPress(Sender: TObject; var Key: Char);
    procedure ToolButton1Click(Sender: TObject);
    procedure TBRKQCClick(Sender: TObject);
    procedure TBRKZDClick(Sender: TObject);
    procedure TBRKCGJGClick(Sender: TObject);
    procedure ToolButton2Click(Sender: TObject);
    procedure Tv1CellClick(Sender: TcxCustomGridTableView;
      ACellViewInfo: TcxGridTableDataCellViewInfo; AButton: TMouseButton;
      AShift: TShiftState; var AHandled: Boolean);
    procedure Tv1MouseDown(Sender: TObject; Button: TMouseButton;
      Shift: TShiftState; X, Y: Integer);
    procedure N3Click(Sender: TObject);
    procedure N4Click(Sender: TObject);
    procedure ToolButton3Click(Sender: TObject);
  private
    canshu1,canshu2,canshu3:string;
    procedure InitGrid();
    procedure InitImage();
    procedure ReadINIFile();
    { Private declarations }
  public
    { Public declarations }
  end;

//var
 // frmShaRKList: TfrmShaRKList;
 var
   Mach: array of TfrmSlt;

implementation
uses
  U_DataLink,U_RTFun,U_ShaRKInPut, U_FileUp;

{$R *.dfm}

procedure TfrmShaRKList.FormDestroy(Sender: TObject);
begin
  //frmShaRKList:=nil;
end;

procedure TfrmShaRKList.FormClose(Sender: TObject;
  var Action: TCloseAction);
var
  i,j:integer;
begin
  j:=length(Mach);
  if j>0 then
  begin
    for i:=0 to j-1 do
    begin
      Mach[i].free;
    end;
  end;
  SetLength(Mach, 0);
  Action:=caFree;
end;
procedure TfrmShaRKList.ReadINIFile();
var
  programIni:Tinifile;  //配置文件名
  FileName:string;
begin
  FileName:=ExtractFilePath(Paramstr(0))+'SYSTEMSET.INI';
  programIni:=Tinifile.create(FileName);
  server:=programIni.ReadString('SERVER','服务器地址','127.0.0.1');
  programIni.Free;
end;
procedure TfrmShaRKList.FormCreate(Sender: TObject);
begin
  //cxGrid1.Align:=alClient;
  EndDate.DateTime:=SGetServerDate10(ADOQueryTemp);
  BegDate.DateTime:=EndDate.DateTime;
  canshu1:=Trim(DParameters1);
  canshu2:=Trim(DParameters2);
  canshu3:=Trim(DParameters3);
end;

procedure TfrmShaRKList.InitGrid();
begin
  try
    ADOQueryMain.DisableControls;
    with ADOQueryMain do
    begin
      Filtered:=False;
      Close;
      sql.Clear;
      sql.Add(' select A.* ');
      sql.Add(' from CK_SXPB_CR A');
      sql.add(' where A.CRTime>='''+Trim(FormatDateTime('yyyy-MM-dd',BegDate.DateTime))+'''');
      sql.Add(' and A.CRTime<'''+Trim(FormatDateTime('yyyy-MM-dd',enddate.DateTime+1))+'''');
      sql.Add(' and isnull(CKName,'''')=''纱线''');
      SQL.Add(' and CRFlag=''入库''  ');
      {if Trim(canshu2)<>'' then
      begin
        SQL.Add(' and isnull(DeptName,'''')='''+Trim(canshu2)+'''');
      end;}
      if cxTabControl1.TabIndex=0 then
      begin
        Sql.Add(' and ZFFlag=0 ');
      end else
      if cxTabControl1.TabIndex=1 then
      begin
        Sql.Add(' and ZFFlag=1 ');
      end;
      SQL.Add(' order by CRTime desc');
      Open;
    end;
    SCreateCDS20(ADOQueryMain,CDS_Main);
    SInitCDSData20(ADOQueryMain,CDS_Main);
  finally
    ADOQueryMain.EnableControls;
  end;
end;

procedure TfrmShaRKList.TBRafreshClick(Sender: TObject);
begin
  BegDate.SetFocus;
  InitGrid();
end;

procedure TfrmShaRKList.ConNoMChange(Sender: TObject);
begin
  if ADOQueryMain.Active then
  begin
    SDofilter(ADOQueryMain,SGetFilters(Panel1,1,2));
  end;
end;

procedure TfrmShaRKList.TBCloseClick(Sender: TObject);
begin
  WriteCxGrid('纱线入库列表',Tv1,'纱线仓库');
  Close;
end;

procedure TfrmShaRKList.FormShow(Sender: TObject);
begin
  ReadCxGrid('纱线入库列表',Tv1,'纱线仓库');
  if Trim(Self.Caption)='纱线入库管理' then
  begin
    TBEdit.Visible:=False;
    TBDel.Visible:=False;
  end else
  if Trim(Self.Caption)='纱线入库查询' then
  begin
    TBRKQC.Visible:=False;
    TBRKZD.Visible:=False;
    TBRKCGJG.Visible:=False;
    TBRKHC.Visible:=False;
    TBDel.Visible:=False;
    TBEdit.Visible:=False;
    TBZF.Visible:=False;
    cxTabControl1.Visible:=False;
  end else
  if Trim(Self.Caption)='纱线入库管理(高权限)' then
  begin
    canshu1:='高权限';
  end;
  //InitGrid();
end;

procedure TfrmShaRKList.TBExportClick(Sender: TObject);
begin
  if ADOQueryMain.IsEmpty then exit;
  TcxGridToExcel('纱线入库列表',cxGrid2);
end;

procedure TfrmShaRKList.TBFindClick(Sender: TObject);
begin
  if ADOQueryMain.Active then
  begin
    SDofilter(ADOQueryMain,SGetFilters(Panel1,1,2));
    SCreateCDS20(ADOQueryMain,CDS_Main);
    SInitCDSData20(ADOQueryMain,CDS_Main);
  end;
end;

procedure TfrmShaRKList.N1Click(Sender: TObject);
begin
  SelOKNo(CDS_Main,True);
end;

procedure TfrmShaRKList.N2Click(Sender: TObject);
begin
  SelOKNo(CDS_Main,False);
end;

procedure TfrmShaRKList.TBDelClick(Sender: TObject);
begin
  if CDS_Main.IsEmpty then Exit;
  if cxTabControl1.TabIndex<>0 then Exit;
  if Trim(CDS_Main.fieldbyname('SPID').AsString)<>'' then
  begin
    if Trim(CDS_Main.fieldbyname('CRType').AsString)='平移入库' then
    begin
      Application.MessageBox('平移入库的数据为自动生成，不能删除!','提示',0);
      Exit;
    end;
    with ADOQueryTemp do
    begin
      Close;
      sql.Clear;
      sql.Add('select * from YF_Money_CR where YFTypeId='''+Trim(CDS_Main.fieldbyname('SPID').AsString)+'''');
      Open;
    end;
    if ADOQueryTemp.IsEmpty=False then
    begin
      Application.MessageBox('已经生成应付款不能删除!','提示',0);
      Exit;
    end;
    with ADOQueryTemp do
    begin
      Close;
      sql.Clear;
      sql.Add('select * from CK_SXPB_CR where FZSPID='''+Trim(CDS_Main.fieldbyname('SPID').AsString)+'''');
      sql.Add(' and CRQtyFlag=-1');
      Open;
    end;
    if ADOQueryTemp.IsEmpty=False then
    begin
      Application.MessageBox('已有出库记录，不能删除!','提示',0);
      Exit;
    end;
    if Application.MessageBox('确定要删除数据吗？','提示',32+4)<>IDYES then Exit;
    try
      ADOQueryCmd.Connection.BeginTrans;

      with ADOQueryCmd do
      begin
        Close;
        sql.Clear;
        sql.Add(' delete CK_SXPB_CR where SPID='''+Trim(CDS_Main.fieldbyname('SPID').AsString)+'''');
        sql.Add(' delete GYS_Qty_MX where WBID='''+Trim(CDS_Main.fieldbyname('SPID').AsString)+'''');
        ExecSQL;
      end;
      //更新申请到货
      with ADOQueryCmd do
      begin
        Close;
        sql.Clear;
        sql.Add('Update CaiGou_SQ Set DHPS=(select Sum(PiQty) from CK_SXPB_CR A where A.SQID=CaiGou_SQ.SQID and A.ZFFlag=0');
        sql.Add(' and isnull(A.HZCRType,'''')=''采购加工入库'') ');
        sql.Add(', DHQty=(select Sum(Qty) from CK_SXPB_CR A where A.SQID=CaiGou_SQ.SQID and A.ZFFlag=0 ');
        sql.Add(' and isnull(A.HZCRType,'''')=''采购加工入库'') ');
        sql.Add(' where SQID='''+Trim(CDS_Main.fieldbyname('SQID').AsString)+'''');
        ExecSQL;
      end;
      //更新出库记录回仓
      with ADOQueryCmd do
      begin
        Close;
        sql.Clear;
        sql.Add('Update CK_SXPB_CR Set HCPS=(select Sum(PiQty) from CK_SXPB_CR A where A.FromSPID=CK_SXPB_CR.SPID and A.ZFFlag=0)');
        sql.Add(', HCQty=(select Sum(Qty) from CK_SXPB_CR A where A.FromSPID=CK_SXPB_CR.SPID and A.ZFFlag=0)');
        sql.Add(' where SPID='''+Trim(CDS_Main.fieldbyname('FromSPID').AsString)+'''');
        ExecSQL;
      end;
      ADOQueryCmd.Connection.CommitTrans;
      CDS_Main.Delete;
    except
      ADOQueryCmd.Connection.RollbackTrans;
      Application.MessageBox('删除异常!','提示',0);
    end;

  end else
  begin
    CDS_Main.Delete;
  end;
end;

procedure TfrmShaRKList.TBRKHCClick(Sender: TObject);
begin
  try
    frmShaRKInPut:=TfrmShaRKInPut.Create(Application);
    with frmShaRKInPut do
    begin
      FBCId:='';
      FCRType:='加工未做回仓';
      frmShaRKInPut.canshu3:=Trim(Self.canshu3);
      if ShowModal=1 then
      begin
        Self.InitGrid();
      end;
    end;
  finally
    frmShaRKInPut.Free;
  end;
end;

procedure TfrmShaRKList.TBEditClick(Sender: TObject);
begin
  if CDS_Main.IsEmpty then Exit;
  if cxTabControl1.TabIndex<>0 then Exit;
  if Trim(CDS_Main.fieldbyname('CRType').AsString)='平移入库' then
  begin
    Application.MessageBox('平移入库的数据为自动生成，不能修改!','提示',0);
    Exit;
  end;
  with ADOQueryTemp do
  begin
    Close;
    sql.Clear;
    sql.Add('select * from YF_Money_CR where YFTypeId='''+Trim(CDS_Main.fieldbyname('SPID').AsString)+'''');
    Open;
  end;
  if ADOQueryTemp.IsEmpty=False then
  begin
    Application.MessageBox('已经生成应付款不能修改!','提示',0);
    Exit;
  end;
  try
    frmShaRKInPut:=TfrmShaRKInPut.Create(Application);
    with frmShaRKInPut do
    begin
      FBCId:=Trim(CDS_Main.fieldbyname('SPID').AsString);
      TBDel.Visible:=False;
      TBAdd.Visible:=False;
      FCRType:=Trim(CDS_Main.fieldbyname('HZCRType').AsString);
      canshu88:=Self.canshu1;
      if ShowModal=1 then
      begin
        Self.InitGrid();
      end;
    end;
  finally
    frmShaRKInPut.Free;
  end;
end;

procedure TfrmShaRKList.SPIDKeyPress(Sender: TObject; var Key: Char);
begin
  if Key=#13 then
  begin
    {if Length(Trim(SPID.Text))<4 then Exit;
    try
      ADOQueryMain.DisableControls;
      with ADOQueryMain do
      begin
        Filtered:=False;
        Close;
        sql.Clear;
        sql.Add(' select A.* ');
        sql.Add(',ConNo=(select ConNo from Contract_Main CM where CM.MainId=A.CGMainId)');
        //sql.Add(' ,ConNo=(select ConNo from Contract_Main CM where CM.MainId=A.CGMainId )');
        sql.Add(' from CK_SXPB_CR A');
        sql.add(' where SPID like :SXID');
        Parameters.ParamByName('SXID').Value:='%'+Trim(SXID.Text)+'%';
        Open;
        //ShowMessage(SQL.Text);
      end;
      SCreateCDS20(ADOQueryMain,CDS_Main);
      SInitCDSData20(ADOQueryMain,CDS_Main);
    finally
      ADOQueryMain.EnableControls;
    end;  }
  end;
end;

procedure TfrmShaRKList.SPIDChange(Sender: TObject);
begin
  if Length(Trim(SPID.Text))<4 then
  begin
    if Trim(SPID.Text)<>'' then Exit;
  end;
  TBFind.Click;
end;

procedure TfrmShaRKList.SPSpecChange(Sender: TObject);
begin
  TBFind.Click;
end;

procedure TfrmShaRKList.FactoryNameChange(Sender: TObject);
begin
  TBFind.Click;
end;

procedure TfrmShaRKList.TBZFClick(Sender: TObject);
begin
  if CDS_Main.IsEmpty then Exit;
  if cxTabControl1.TabIndex<>0 then Exit;
  if Trim(CDS_Main.fieldbyname('SPID').AsString)<>'' then
  begin
    if Trim(CDS_Main.fieldbyname('CRType').AsString)='平移入库' then
    begin
      Application.MessageBox('平移入库的数据为自动生成，不能作废!','提示',0);
      Exit;
    end;
    with ADOQueryTemp do
    begin
      Close;
      sql.Clear;
      sql.Add('select * from YF_Money_CR where YFTypeId='''+Trim(CDS_Main.fieldbyname('SPID').AsString)+'''');
      Open;
    end;
    if ADOQueryTemp.IsEmpty=False then
    begin
      Application.MessageBox('已经生成应付款不能作废!','提示',0);
      Exit;
    end;
    with ADOQueryTemp do
    begin
      Close;
      sql.Clear;
      sql.Add('select * from CK_SXPB_CR where FZSPID='''+Trim(CDS_Main.fieldbyname('SPID').AsString)+'''');
      sql.Add(' and CRQtyFlag=-1 and ZFFlag=0 ');
      Open;
    end;
    if ADOQueryTemp.IsEmpty=False then
    begin
      Application.MessageBox('已有出库记录，不能作废！','提示',0);
       Exit;
    end;
    { else
    begin
      if Application.MessageBox('确定要作废此入库记录吗？','提示',32+4)<>IDYES then Exit;
    end;}

    try
      ADOQueryCmd.Connection.BeginTrans;
      with ADOQueryCmd do
      begin
        Close;
        sql.Clear;
        sql.Add(' UPdate CK_SXPB_CR Set ZFFlag=1,ZFTime=Getdate(),ZFPerson='''+Trim(DName)+'''');
        sql.Add(' where FZSPID='''+Trim(CDS_Main.fieldbyname('SPID').AsString)+'''') ;
        ExecSQL;
      end;
      //更新申请到货
      with ADOQueryCmd do
      begin
        Close;
        sql.Clear;
        sql.Add('Update CaiGou_SQ Set DHPS=(select Sum(PiQty) from CK_SXPB_CR A where A.SQID=CaiGou_SQ.SQID and A.ZFFlag=0');
        sql.Add(' and isnull(A.HZCRType,'''')=''采购加工入库'') ');
        sql.Add(', DHQty=(select Sum(Qty) from CK_SXPB_CR A where A.SQID=CaiGou_SQ.SQID and A.ZFFlag=0 ');
        sql.Add(' and isnull(A.HZCRType,'''')=''采购加工入库'') ');
        sql.Add(' where SQID='''+Trim(CDS_Main.fieldbyname('SQID').AsString)+'''');
        ExecSQL;
      end;
      //更新出库记录回仓
      with ADOQueryCmd do
      begin
        Close;
        sql.Clear;
        sql.Add('Update CK_SXPB_CR Set HCPS=(select Sum(PiQty) from CK_SXPB_CR A where A.FromSPID=CK_SXPB_CR.SPID and A.ZFFlag=0)');
        sql.Add(', HCQty=(select Sum(Qty) from CK_SXPB_CR A where A.FromSPID=CK_SXPB_CR.SPID and A.ZFFlag=0)');
        sql.Add(' where SPID='''+Trim(CDS_Main.fieldbyname('FromSPID').AsString)+'''');
        ExecSQL;
      end;
      ADOQueryCmd.Connection.CommitTrans;
      CDS_Main.Delete;
    except
      ADOQueryCmd.Connection.RollbackTrans;
      Application.MessageBox('作废异常!','提示',0);
    end;

  end else
  begin
    CDS_Main.Delete;
  end;
end;

procedure TfrmShaRKList.cxTabControl1Change(Sender: TObject);
begin
  InitGrid();
end;

procedure TfrmShaRKList.BatchNoKeyPress(Sender: TObject; var Key: Char);
begin
  if Key<>#13 then Exit;
  try
    ADOQueryMain.DisableControls;
    with ADOQueryMain do
    begin
      Filtered:=False;
      Close;
      sql.Clear;
      sql.Add(' select A.* ');
      sql.Add(' from CK_SXPB_CR A');
      sql.add(' where A.BatchNo='''+Trim(BatchNo.Text)+'''');
      sql.Add(' and isnull(CKName,'''')=''纱线''');
      SQL.Add(' and CRFlag=''入库''  ');
      {if Trim(canshu2)<>'' then
      begin
        SQL.Add(' and isnull(DeptName,'''')='''+Trim(canshu2)+'''');
      end;}
      if cxTabControl1.TabIndex=0 then
      begin
        Sql.Add(' and ZFFlag=0 ');
      end else
      if cxTabControl1.TabIndex=1 then
      begin
        Sql.Add(' and ZFFlag=1 ');
      end;
      SQL.Add(' order by CRTime desc');
      Open;
    end;
    SCreateCDS20(ADOQueryMain,CDS_Main);
    SInitCDSData20(ADOQueryMain,CDS_Main);
  finally
    ADOQueryMain.EnableControls;
  end;
end;

procedure TfrmShaRKList.ToolButton1Click(Sender: TObject);
var
  filepath:string;
  mBegdate,mEnddate:string;
  FName,FNameSX,FNameJX:String;
  i:Integer;
begin
  for i:=0 to Tv1.ColumnCount-1 do
  begin
    FName:=Tv1.Columns[i].DataBinding.FilterFieldName;
    FNameSX:=Trim(FName)+'-1';
    FNameJX:=Trim(FName)+'-2';
    CDS_Main.AddIndex(FNameSX, FName, []);             { 正序 }
    CDS_Main.AddIndex(FNameJX, FName, [ixDescending]); { 倒序 }
//    if Tv1.Columns[i].SortOrder=soDescending then
//    begin
//      CDS_Main.IndexName:=FNameJX;
//    end else
//    if Tv1.Columns[i].SortOrder=soAscending then
//    begin
//      CDS_Main.IndexName:=FNameSX;
//    end;
  end;
  mbegdate:=FormatDateTime('yyyy-MM-dd',begdate.Date);
  menddate:=FormatDateTime('yyyy-MM-dd',enddate.Date);
  if CDS_Main.IsEmpty then exit;
  try
    filepath:=ExtractFilePath(Application.ExeName) + 'report\纱线入库报表.rmf';
    if not FileExists(Pchar(filepath))  then
    begin
      application.MessageBox(pchar('文件['+filepath+']不存在！'),'提示信息',MB_IConError);
      exit;
    end;
    RmVariables['begDate'] :=FormatDateTime('yymmdd',begDate.Date)+'-'+FormatDateTime('yymmdd',enddate.Date);
    RM1.LoadFromFile(filepath);
    RM1.ShowReport;
  finally

  end;

end;

procedure TfrmShaRKList.TBRKQCClick(Sender: TObject);
begin
  try
    frmShaRKInPut:=TfrmShaRKInPut.Create(Application);
    with frmShaRKInPut do
    begin
      FBCId:='';
      FCRType:='期初入库';
      frmShaRKInPut.canshu3:=Trim(Self.canshu3);
      if ShowModal=1 then
      begin
        Self.InitGrid();
      end;
    end;
  finally
    frmShaRKInPut.Free;
  end;
end;

procedure TfrmShaRKList.TBRKZDClick(Sender: TObject);
begin
  try
    frmShaRKInPut:=TfrmShaRKInPut.Create(Application);
    with frmShaRKInPut do
    begin
      FBCId:='';
      FCRType:='客户自带入库';
      frmShaRKInPut.canshu3:=Trim(Self.canshu3);
      if ShowModal=1 then
      begin
        Self.InitGrid();
      end;
    end;
  finally
    frmShaRKInPut.Free;
  end;
end;

procedure TfrmShaRKList.TBRKCGJGClick(Sender: TObject);
begin
  try
    frmShaRKInPut:=TfrmShaRKInPut.Create(Application);
    with frmShaRKInPut do
    begin
      FBCId:='';
      FCRType:='采购加工入库';
      frmShaRKInPut.canshu3:=Trim(Self.canshu3);
      if ShowModal=1 then
      begin
        Self.InitGrid();
      end;
    end;
  finally
    frmShaRKInPut.Free;
  end;
end;

procedure TfrmShaRKList.ToolButton2Click(Sender: TObject);
begin
  try
    frmFileUp:=TfrmFileUp.Create(Application);
    with frmFileUp do
    begin
      Code.Text:=Trim(Self.CDS_Main.fieldbyname('SPID').AsString);
      CYID:=Trim(Self.CDS_Main.fieldbyname('SPID').AsString);
      if ShowModal=1 then
      begin
        //Self.InitGrid();
        //Self.CDS_Main.Locate('SPID',CYID,[]);
      end;
    end;
  finally
    frmFileUp.Free;
  end;
end;

procedure TfrmShaRKList.InitImage();
var
  i,j:integer;
  jpg:TJpegImage;
  myStream: TADOBlobStream;
begin

  j:=length(Mach);
  if j>0 then
  begin
    for i:=0 to j-1 do
    begin
      Mach[i].free;
    end;
  end;
  SetLength(Mach, 0);
  IF CDS_Main.IsEmpty then exit;                             
  try
    with adoqueryPicture do
    begin
      close;
      sql.Clear;
      sql.Add(' select A.TFID,A.WBID,A.FilesOther,B.FileName from TP_File A,XD_File B  where A.TFID =B.XFID ');
      if CDS_Main.IsEmpty=False then
      begin
        sql.Add('and A.WBID='+quotedstr(trim(CDS_Main.fieldbyname('SPID').AsString)));
      end else
      begin
        sql.add(' and 1=2');
      end;
      open;
    end;
    j:=adoqueryPicture.RecordCount;
    if j<1 then exit;
    adoqueryPicture.DisableControls;
    adoqueryPicture.First;
    SetLength(Mach, j);
    jpg:=TJpegImage.Create();
    for i:=0 to j-1 do
    begin
      if triM(adoqueryPicture.fieldbyname('FilesOther').AsString)<>'' then
      begin
        myStream:=tadoblobstream.Create(tblobfield(adoqueryPicture.fieldbyname('FilesOther')),bmread);
        jpg.LoadFromStream(myStream);
        Mach[i] := TfrmSlt.Create(Self);
        Mach[i].Name:=trim(adoqueryPicture.fieldbyname('TFID').AsString);
        Mach[i].Parent := ScrollBox1;
        Mach[I].Left:=0+i*165;
        Mach[i].Init(adoqueryPicture.fieldbyname('TFID').AsString,adoqueryPicture.fieldbyname('FileName').AsString,jpg);
      end;
      adoqueryPicture.Next;
    end;
     adoqueryPicture.EnableControls;
  finally
    jpg.free;
    application.ProcessMessages;
  end;
end;
procedure TfrmShaRKList.Tv1CellClick(Sender: TcxCustomGridTableView;
  ACellViewInfo: TcxGridTableDataCellViewInfo; AButton: TMouseButton;
  AShift: TShiftState; var AHandled: Boolean);
begin
  InitImage();
end;

procedure TfrmShaRKList.Tv1MouseDown(Sender: TObject; Button: TMouseButton;
  Shift: TShiftState; X, Y: Integer);
begin
  with ADOQueryTemp do
  begin
    Close;
    sql.Clear;
    if CDS_Main.IsEmpty=false then
      sql.Add('select * from GYS_Qty_MX where WBID='''+Trim(CDS_Main.fieldbyname('SPID').AsString)+'''')
    else
      sql.Add('select * from GYS_Qty_MX where 1=2');
    Open;
  end;
  SCreateCDS20(ADOQueryTemp,CDS_MX);
  SInitCDSData20(ADOQueryTemp,CDS_MX);
end;

procedure TfrmShaRKList.N3Click(Sender: TObject);
begin
  SelOKNo(CDS_MX,True);
end;

procedure TfrmShaRKList.N4Click(Sender: TObject);
begin
  SelOKNo(CDS_MX,False);
end;

procedure TfrmShaRKList.ToolButton3Click(Sender: TObject);
var
   fPrintFile,FFCYID:string;
   DPS,i,j:Integer;
   Txt,fImagePath:string;
   Moudle: THandle;
   Makebar:TMakebar;
   Mixtext:TMixtext;
begin
  SPID.SetFocus;
  if CDS_Main.IsEmpty then Exit;
  fPrintFile:= ExtractFilePath(Application.ExeName) + 'Report\纱线标签.rmf';
  CDS_Main.DisableControls;
  DPS:=0;
  FFCYID:='';
  i:=1;
  j:=1;
  with CDS_MX do
  begin
    First;
    while not Eof do
    begin
      if CDS_MX.FieldByName('SSel').AsBoolean=True then
      begin
        try
          Moudle:=LoadLibrary('MakeQRBarcode.dll');
          @Makebar:=GetProcAddress(Moudle,'Make');
          @Mixtext:=GetProcAddress(Moudle,'MixText');
          Txt:=Trim(CDS_MX.fieldbyname('SMID').AsString);
          fImagePath:=ExtractFilePath(Application.ExeName)+'image\temp.bmp';
          if not DirectoryExists(pchar(ExtractFilePath(Application.ExeName)+'image')) then
          CreateDirectory(pchar(ExtractFilePath(Application.ExeName)+'image'),nil);
          if FileExists(fImagePath) then DeleteFile(fImagePath);
          Makebar(pchar(Txt),Length(Txt),3,3,0,PChar(fImagePath),3);
        except
          application.MessageBox('条形码生成失败！','提示信息',MB_ICONERROR);
          exit;
        end;
        RMVariables['QRBARCODE']:=fImagePath;

        for i:=1 to j do
        begin
          if FileExists(fPrintFile) then
          begin
            RM1.LoadFromFile(fPrintFile);
            RMVariables['SPName']:=Trim(CDS_Main.fieldbyname('SPName').AsString);
            RMVariables['FactoryName']:=Trim(CDS_Main.fieldbyname('FactoryName').AsString);
            RMVariables['BatchNo']:=Trim(CDS_Main.fieldbyname('BatchNo').AsString);
            RMVariables['SPColor']:=Trim(CDS_Main.fieldbyname('SPColor').AsString);
            RMVariables['MXQty']:=CDS_MX.fieldbyname('MXQty').Value;
            RM1.PrintReport;
           // RM1.ShowReport;
          end else
          begin
            Application.MessageBox(PChar('没有找'+ExtractFilePath(Application.ExeName)+'Report\纱线标签.rmf'),'提示',0);
            Exit;
          end;
        end;
      end;
      Next;
    end;
  end;
  CDS_Main.EnableControls;
end;

end.