unit U_CLYouKa;

interface

uses
  Windows, Messages, SysUtils, Variants, Classes, Graphics, Controls, Forms,
  Dialogs, cxStyles, cxCustomData, cxGraphics, cxFilter, cxData,
  cxDataStorage, cxEdit, DB, cxDBData, cxGridCustomTableView,
  cxGridTableView, cxGridBandedTableView, cxGridDBBandedTableView,
  cxGridLevel, cxClasses, cxControls, cxGridCustomView, cxGridDBTableView,
  cxGrid, StdCtrls, ComCtrls, ExtCtrls, ToolWin, cxGridCustomPopupMenu,
  cxGridPopupMenu, ADODB, DBClient, cxDropDownEdit, cxCheckBox, RM_Common,
  RM_Class, RM_e_Xls, RM_Dataset, RM_System, RM_GridReport, Menus,
  cxCalendar, cxButtonEdit, cxTextEdit, cxPC;

type
  TfrmCLYouKa = class(TForm)
    ToolBar1: TToolBar;
    TBRafresh: TToolButton;
    TBFind: TToolButton;
    TBExport: TToolButton;
    TBClose: TToolButton;
    Panel1: TPanel;
    ADOQueryCmd: TADOQuery;
    ADOQueryMain: TADOQuery;
    ADOQueryTemp: TADOQuery;
    DataSource1: TDataSource;
    cxGridPopupMenu1: TcxGridPopupMenu;
    Label1: TLabel;
    Label2: TLabel;
    BegDate: TDateTimePicker;
    EndDate: TDateTimePicker;
    CDS_Main: TClientDataSet;
    RM1: TRMGridReport;
    RMDBMain: TRMDBDataSet;
    RMXLSExport1: TRMXLSExport;
    RMDBHZ: TRMDBDataSet;
    CDS_HZ: TClientDataSet;
    CDS_PRT: TClientDataSet;
    TBDel: TToolButton;
    PopupMenu1: TPopupMenu;
    N1: TMenuItem;
    N2: TMenuItem;
    TBAdd: TToolButton;
    TBEdit: TToolButton;
    Label12: TLabel;
    Label6: TLabel;
    CPNo: TEdit;
    cxTabControl1: TcxTabControl;
    TTJ: TToolButton;
    TCXTJ: TToolButton;
    Label3: TLabel;
    SJName: TEdit;
    Label5: TLabel;
    CLSpec: TEdit;
    cxGrid2: TcxGrid;
    Tv1: TcxGridDBTableView;
    v1CRTime: TcxGridDBColumn;
    v1SJName: TcxGridDBColumn;
    v1CLSpec: TcxGridDBColumn;
    v1CPNo: TcxGridDBColumn;
    v1JPSpec: TcxGridDBColumn;
    v1CheHao: TcxGridDBColumn;
    v1Note: TcxGridDBColumn;
    cxGrid2Level1: TcxGridLevel;
    JPSpec: TEdit;
    Label4: TLabel;
    CheHao: TEdit;
    v1YPrice: TcxGridDBColumn;
    v1YMoney: TcxGridDBColumn;
    procedure FormDestroy(Sender: TObject);
    procedure FormClose(Sender: TObject; var Action: TCloseAction);
    procedure FormCreate(Sender: TObject);
    procedure TBRafreshClick(Sender: TObject);
    procedure ConNoMChange(Sender: TObject);
    procedure TBCloseClick(Sender: TObject);
    procedure FormShow(Sender: TObject);
    procedure TBExportClick(Sender: TObject);
    procedure TBFindClick(Sender: TObject);
    procedure N1Click(Sender: TObject);
    procedure N2Click(Sender: TObject);
    procedure TBDelClick(Sender: TObject);
    procedure TBAddClick(Sender: TObject);
    procedure TBEditClick(Sender: TObject);
    procedure SPIDChange(Sender: TObject);
    procedure SPSpecChange(Sender: TObject);
    procedure GCNameChange(Sender: TObject);
    procedure cxTabControl1Change(Sender: TObject);
    procedure TTJClick(Sender: TObject);
    procedure TCXTJClick(Sender: TObject);
  private
    canshu1,canshu2,canshu3:string;
    procedure InitGrid();
    procedure setstatus();
    { Private declarations }
  public
    { Public declarations }
  end;

var
  frmCLYouKa: TfrmCLYouKa;

implementation
uses
  U_DataLink,U_RTFun,U_SXCKInPut, U_JGSXCKInPut, U_CLShuiPiao_Sub,U_CLYouKa_Sub;

{$R *.dfm}
procedure TfrmCLYouKa.setstatus();
begin
  TBAdd.Visible:=False;
  TBEdit.Visible:=false;
  TBDel.Visible:=False;
  TTJ.Visible:=False;
  TCXTJ.Visible:=False;
  cxTabControl1.Visible:=false;
  if Trim(canshu1)<>'高权限' then
  begin
    cxTabControl1.Visible:=true;
    if cxTabControl1.TabIndex=0 then
    begin
      TBAdd.Visible:=true;
      TBEdit.Visible:=true;
      TBDel.Visible:=true;
      TTJ.Visible:=true;
    end;
    if cxTabControl1.TabIndex=1 then
    begin
      TCXTJ.Visible:=true;
    end;
  end
  else
  begin
    cxTabControl1.TabIndex:=2;
  end;
end;

procedure TfrmCLYouKa.FormDestroy(Sender: TObject);
begin
  frmCLYouKa:=nil;
end;

procedure TfrmCLYouKa.FormClose(Sender: TObject;
  var Action: TCloseAction);
begin
  Action:=caFree;
end;

procedure TfrmCLYouKa.FormCreate(Sender: TObject);
begin
  //cxGrid1.Align:=alClient;
  EndDate.DateTime:=SGetServerDate10(ADOQueryTemp);
  BegDate.DateTime:=EndDate.DateTime-30;
  canshu1:=Trim(DParameters1);
  canshu2:=Trim(DParameters2);
  canshu3:=Trim(DParameters3);
end;

procedure TfrmCLYouKa.InitGrid();
begin
  try
    ADOQueryMain.DisableControls;
    with ADOQueryMain do
    begin
      Filtered:=False;
      Close;
      sql.Clear;
      sql.Add(' select A.* ');
      sql.Add(' from CL_YK_Main A');
      sql.add(' where A.CRTime>='''+Trim(FormatDateTime('yyyy-MM-dd',BegDate.Date))+'''');
      sql.Add(' and A.CRTime<'''+Trim(FormatDateTime('yyyy-MM-dd',enddate.Date+1))+'''');
      if cxTabControl1.TabIndex=0 then
      begin
        sql.Add(' and isnull(Chkstatus,'''') in ('''',''审核不通过'')');
      end;
      if cxTabControl1.TabIndex=1 then
      begin
        sql.Add(' and isnull(Chkstatus,'''')=''已提交''');
      end;
      if cxTabControl1.TabIndex=2 then
      begin
        sql.Add(' and isnull(Chkstatus,'''')=''已审核''');
      end;
      SQL.Add(' order by A.CRTime desc');
      Open;
    end;
    SCreateCDS20(ADOQueryMain,CDS_Main);
    SInitCDSData20(ADOQueryMain,CDS_Main);
  finally
    ADOQueryMain.EnableControls;
  end;
end;

procedure TfrmCLYouKa.TBRafreshClick(Sender: TObject);
begin
  BegDate.SetFocus;
  InitGrid();
end;

procedure TfrmCLYouKa.ConNoMChange(Sender: TObject);
begin
  if ADOQueryMain.Active then
  begin
    SDofilter(ADOQueryMain,SGetFilters(Panel1,1,2));
  end;
end;

procedure TfrmCLYouKa.TBCloseClick(Sender: TObject);
begin
  WriteCxGrid('油卡充值列表FM',Tv1,'油卡充值');
  Close;
end;

procedure TfrmCLYouKa.FormShow(Sender: TObject);
begin
  ReadCxGrid('油卡充值列表FM',Tv1,'油卡充值');
  setstatus();
  //InitGrid();
end;

procedure TfrmCLYouKa.TBExportClick(Sender: TObject);
begin
  if ADOQueryMain.IsEmpty then exit;
  TcxGridToExcel('油卡充值列表',cxGrid2);
end;

procedure TfrmCLYouKa.TBFindClick(Sender: TObject);
begin
  if ADOQueryMain.Active then
  begin
    SDofilter(ADOQueryMain,SGetFilters(Panel1,1,2));
    SCreateCDS20(ADOQueryMain,CDS_Main);
    SInitCDSData20(ADOQueryMain,CDS_Main);
  end;
end;

procedure TfrmCLYouKa.N1Click(Sender: TObject);
begin
  SelOKNo(CDS_Main,True);
end;

procedure TfrmCLYouKa.N2Click(Sender: TObject);
begin
  SelOKNo(CDS_Main,False);
end;

procedure TfrmCLYouKa.TBDelClick(Sender: TObject);
begin
  if CDS_Main.IsEmpty then Exit;
  if Trim(CDS_Main.fieldbyname('YKID').AsString)<>'' then
  begin
    if Application.MessageBox('确定要删除数据吗？','提示',32+4)<>IDYES then Exit;
    try
      ADOQueryCmd.Connection.BeginTrans;
      with ADOQueryCmd do
      begin
        Close;
        sql.Clear;
        sql.Add(' delete from CL_YK_Main where YKID='''+Trim(CDS_Main.fieldbyname('YKID').AsString)+'''');
        ExecSQL;
      end;
      ADOQueryCmd.Connection.CommitTrans;
      CDS_Main.Delete;
    except
      ADOQueryCmd.Connection.RollbackTrans;
      Application.MessageBox('删除异常!','提示',0);
    end;
  end else
  begin
    CDS_Main.Delete;
  end;
end;

procedure TfrmCLYouKa.TBAddClick(Sender: TObject);
begin
  try
    frmCLYouKa_Sub:=TfrmCLYouKa_Sub.Create(Application);
    with frmCLYouKa_Sub do
    begin
      FBCId:='';
      frmCLYouKa_Sub.canshu3:=Trim(Self.canshu3);
      if ShowModal=1 then
      begin
        Self.InitGrid();
      end;
    end;
  finally
    frmCLYouKa_Sub.Free;
  end;
end;

procedure TfrmCLYouKa.TBEditClick(Sender: TObject);
begin
  if CDS_Main.IsEmpty then Exit;
  try
    frmCLYouKa_Sub:=TfrmCLYouKa_Sub.Create(Application);
    with frmCLYouKa_Sub do
    begin
      ToolButton1.Visible:=false;
      ToolButton2.Visible:=false;
      FBCId:=Trim(CDS_Main.fieldbyname('YKID').AsString);
      if ShowModal=1 then
      begin
        Self.InitGrid();
      end;
    end;
  finally
    frmCLYouKa_Sub.Free;
  end;
end;

procedure TfrmCLYouKa.SPIDChange(Sender: TObject);
begin
  
  TBFind.Click;
end;

procedure TfrmCLYouKa.SPSpecChange(Sender: TObject);
begin
  TBFind.Click;
end;

procedure TfrmCLYouKa.GCNameChange(Sender: TObject);
begin
  TBFind.Click;
end;

procedure TfrmCLYouKa.cxTabControl1Change(Sender: TObject);
begin
  setstatus();
  InitGrid();
end;

procedure TfrmCLYouKa.TTJClick(Sender: TObject);
begin
  if CDS_Main.IsEmpty then exit;
  with ADOQueryCmd do
  begin
    close;
    sql.Clear;
    sql.Add('Update CL_YK_Main set ');
    sql.Add('Chker='''+trim(DName)+''',Chkstatus=''已提交'',Chkdate=getdate() ');
    sql.Add('where YKID='''+trim(CDS_Main.fieldbyname('YKID').AsString)+'''');
    ExecSQL;
  end;
  CDS_Main.Delete;
  application.MessageBox('操作成功','提示');
end;

procedure TfrmCLYouKa.TCXTJClick(Sender: TObject);
begin
  if CDS_Main.IsEmpty then exit;
  with ADOQueryCmd do
  begin
    close;
    sql.Clear;
    sql.Add('Update CL_YK_Main set ');
    sql.Add('Chker='''',Chkstatus='''',Chkdate=NULL ');
    sql.Add('where YKID='''+trim(CDS_Main.fieldbyname('YKID').AsString)+'''');
    ExecSQL;
  end;
  CDS_Main.Delete;
  application.MessageBox('操作成功','提示');
end;

end.