unit U_ZdyAttachment;

interface

uses
  Windows, Messages, SysUtils, Variants, Classes, Graphics, Controls, Forms,
  Dialogs, cxGraphics, cxCustomData, cxStyles, cxTL, cxMaskEdit, DB, ADODB,
  cxInplaceContainer, cxDBTL, cxControls, cxTLData, ComCtrls, ToolWin,
  StdCtrls, cxFilter, cxData, cxDataStorage, cxEdit, cxDBData, DBClient,
  cxGridCustomTableView, cxGridTableView, cxGridDBTableView, ExtCtrls,
  cxSplitter, cxGridLevel, cxClasses, cxGridCustomView, cxGrid,
  cxGridCustomPopupMenu, cxGridPopupMenu, RM_Dataset, RM_System, RM_Common,
  RM_Class, RM_GridReport, IdBaseComponent, IdComponent, IdTCPConnection,
  IdTCPClient, IdFTP,ShellAPI,IniFiles, cxCheckBox, cxCalendar,
  cxButtonEdit, cxTextEdit, cxDBLookupComboBox, cxPC;

type
  TfrmZdyAttachment = class(TForm)
    ToolBar1: TToolBar;
    TBRafresh: TToolButton;
    TBDel: TToolButton;
    TBClose: TToolButton;
    ADOQueryTemp: TADOQuery;
    ADOQueryCmd: TADOQuery;
    Panel1: TPanel;
    ToolButton2: TToolButton;
    ADOQueryMain: TADOQuery;
    ToolButton1: TToolButton;
    RM1: TRMGridReport;
    RMDB_Main: TRMDBDataSet;
    Label3: TLabel;
    ZdyName: TEdit;
    cxGrid2: TcxGrid;
    Tv2: TcxGridDBTableView;
    cxGridLevel1: TcxGridLevel;
    cxGridPopupMenu2: TcxGridPopupMenu;
    DS_HZ: TDataSource;
    CDS_HZ: TClientDataSet;
    ToolButton3: TToolButton;
    v2Column6: TcxGridDBColumn;
    v2Column1: TcxGridDBColumn;
    v2Column2: TcxGridDBColumn;
    v2Column3: TcxGridDBColumn;
    v2Column4: TcxGridDBColumn;
    v2Column5: TcxGridDBColumn;
    v2Column7: TcxGridDBColumn;
    v2Column8: TcxGridDBColumn;
    v2Column9: TcxGridDBColumn;
    Label1: TLabel;
    zjm: TEdit;
    v2Column10: TcxGridDBColumn;
    TBedit: TToolButton;
    Label2: TLabel;
    DEFstr5: TEdit;
    v2Column11: TcxGridDBColumn;
    v2DEFStr7: TcxGridDBColumn;
    v2Column12: TcxGridDBColumn;
    v2Column13: TcxGridDBColumn;
    v2Column14: TcxGridDBColumn;
    DEFStr7: TEdit;
    Label4: TLabel;
    v2Column15: TcxGridDBColumn;
    v2Column16: TcxGridDBColumn;
    TBuser: TToolButton;
    v2Column17: TcxGridDBColumn;
    cxTabControl1: TcxTabControl;
    CheckBox1: TCheckBox;
    v2Column19: TcxGridDBColumn;
    Tchk: TToolButton;
    TNochk: TToolButton;
    v2Column18: TcxGridDBColumn;
    v2Column20: TcxGridDBColumn;
    ToolButton4: TToolButton;
    ToolButton5: TToolButton;
    v2Column21: TcxGridDBColumn;
    ToolButton6: TToolButton;
    v2Column22: TcxGridDBColumn;
    ToolButton7: TToolButton;
    cxGridPopupMenu3: TcxGridPopupMenu;
    CDS_HZ2: TClientDataSet;
    DS_HZ2: TDataSource;
    ADOQueryMain2: TADOQuery;
    DS_HZ3: TDataSource;
    ADOQueryMain3: TADOQuery;
    CDS_HZ3: TClientDataSet;
    cxGridPopupMenu4: TcxGridPopupMenu;
    procedure FormDestroy(Sender: TObject);
    procedure FormClose(Sender: TObject; var Action: TCloseAction);
    procedure TBCloseClick(Sender: TObject);
    procedure TBDelClick(Sender: TObject);
    procedure FormShow(Sender: TObject);
    procedure TBRafreshClick(Sender: TObject);
    procedure ToolButton2Click(Sender: TObject);
    procedure ZdyNameChange(Sender: TObject);
    procedure ToolButton1Click(Sender: TObject);
    procedure TBeditClick(Sender: TObject);
    procedure ToolButton3Click(Sender: TObject);
    procedure TBuserClick(Sender: TObject);
    procedure CheckBox1Click(Sender: TObject);
    procedure TchkClick(Sender: TObject);
    procedure TNochkClick(Sender: TObject);
    procedure FormCreate(Sender: TObject);
    procedure cxTabControl1Change(Sender: TObject);
    procedure ToolButton4Click(Sender: TObject);
    procedure ToolButton5Click(Sender: TObject);
    procedure ToolButton6Click(Sender: TObject);
    procedure ToolButton7Click(Sender: TObject);
    procedure Tv2MouseDown(Sender: TObject; Button: TMouseButton;
      Shift: TShiftState; X, Y: Integer);
  private

    { Private declarations }
    procedure InitGrid();
    procedure setstatus();
  public
    fkhType:string;
    canshu1:string;
  end;

var
  frmZdyAttachment: TfrmZdyAttachment;

implementation
uses
  U_DataLink,U_Fun,U_ZDYHelp,U_ZdyAttInput, U_FjList_RZ;

{$R *.dfm}

procedure TfrmZdyAttachment.setstatus();
begin
  TBedit.Visible:=false;
  TBdel.Visible:=false;
  tchk.Visible:=false;
  tnochk.Visible:=false;
  TBuser.Visible:=false;
  ToolButton7.Visible:=false;
  IF trim(canshu1)=''then
  begin
    case cxTabControl1.TabIndex of
    0:begin
        TBedit.Visible:=true;
        TBdel.Visible:=true;
      end;
    1:begin
      end;
    end;
  end
  else IF trim(canshu1)='高权限'then
  begin
    TBuser.Visible:=True;
    ToolButton7.Visible:=True;
    case cxTabControl1.TabIndex of
    0:begin
        TBedit.Visible:=true;
        tbdel.Visible:=True;
        tchk.Visible:=True;
      end;
    1:begin
        tNochk.Visible:=True;
      end;
    end;
  end;
 // InitGrid();
end;

procedure TfrmZdyAttachment.InitGrid();
begin
  try
    ADOQueryMain.DisableControls;
    with ADOQueryMain do
    begin
      Filtered:=False;
      Close;
      SQL.Clear;
      sql.Add(' select *,zjm=dbo.getpinyin(ZdyName) from KH_Zdy_Attachment where Type=''KHName'' ');
   //   sql.Add(' and isnull(khType,'''')='+quotedstr(trim(fkhType)));
      IF trim(canshu1)<>'高权限'then
      begin
        sql.Add(' and (DEFstr5='+quotedstr(trim(DName)));
        SQL.Add(' or filler='+quotedstr(trim(DName))+')');
      end;
      if cxTabControl1.TabIndex<2 then
      sql.Add(' and status='''+inttostr(cxTabControl1.TabIndex)+''' ');
   //   ShowMessage(sql.Text);
      Open;
    end;
    SCreateCDS20(ADOQueryMain,CDS_HZ);
    SInitCDSData20(ADOQueryMain,CDS_HZ);

    //2级

    ADOQueryMain2.DisableControls;

    with ADOQueryMain2 do
    begin
      Filtered:=False;
      Close;
      SQL.Clear;
      sql.Add('select * from GYS_ZHXX where ATID='''+Trim(CDS_HZ.fieldbyname('ATID').asstring)+'''');
      Open;
    end;
    SCreateCDS20(ADOQueryMain2,CDS_HZ2);
    SInitCDSData20(ADOQueryMain2,CDS_HZ2);


    ///3级

    ADOQueryMain3.DisableControls;

    with ADOQueryMain3 do
    begin
      Close;
      sql.Clear;
      sql.Add('select * from KH_Zdy_Att_Sub where ATID='''+Trim(CDS_HZ.fieldbyname('ATID').asstring)+'''');
      //ShowMessage(sql.Text);
      Open;
    end;
    SCreateCDS20(ADOQueryMain3,CDS_HZ3);
    SInitCDSData20(ADOQueryMain3,CDS_HZ3);
  finally
    ADOQueryMain.EnableControls;
    ADOQueryMain2.EnableControls;
    ADOQueryMain3.EnableControls;
    ADOQueryMain.EnableControls;
  end;
end;


procedure TfrmZdyAttachment.FormDestroy(Sender: TObject);
begin
  frmZdyAttachment:=nil;
end;

procedure TfrmZdyAttachment.FormClose(Sender: TObject; var Action: TCloseAction);
begin
  Action:=caFree;
end;

procedure TfrmZdyAttachment.TBCloseClick(Sender: TObject);
begin
  WriteCxGrid('客户资料',Tv2,'客户自定义');
  Close;
end;
procedure TfrmZdyAttachment.TBDelClick(Sender: TObject);
begin
  if CDS_HZ.IsEmpty then Exit;
  if Application.MessageBox('确定要删除数据吗？','提示',32+4)<>IDYES then Exit;
  if Trim(CDS_HZ.fieldbyname('ATID').AsString)<>'' then
  begin
    with ADOQueryCmd do
    begin
      Close;
      SQL.Clear;
      sql.Add('delete KH_Zdy_Attachment where ATID='''+Trim(CDS_HZ.fieldbyname('ATID').AsString)+'''');
      sql.Add('delete KH_Zdy_Att_Sub where ATID='''+Trim(CDS_HZ.fieldbyname('ATID').AsString)+''' and Type=''KHName'' ');
      sql.Add('delete KH_Zdy where ZdyNo='''+Trim(CDS_HZ.fieldbyname('ATID').AsString)+'''');
      sql.Add('delete from KH_ZHXX where ATID='''+Trim(CDS_HZ.fieldbyname('ATID').AsString)+'''');
      ExecSQL;
    end;
  end;
  CDS_HZ.Delete;
  InitGrid();
end;

procedure TfrmZdyAttachment.FormShow(Sender: TObject);
begin
  ReadCxGrid('客户资料',Tv2,'客户自定义');
  setstatus();
  InitGrid();
end;

procedure TfrmZdyAttachment.TBRafreshClick(Sender: TObject);
begin
  InitGrid();
end;

procedure TfrmZdyAttachment.ToolButton2Click(Sender: TObject);
begin
  if ADOQueryMain.Active then
  begin
    SDofilter(ADOQueryMain,SGetFilters(Panel1,1,2));
    SCreateCDS20(ADOQueryMain,CDS_HZ);
    SInitCDSData20(ADOQueryMain,CDS_HZ);
  end;
end;

procedure TfrmZdyAttachment.ZdyNameChange(Sender: TObject);
begin
  ToolButton2.Click;
end;


procedure TfrmZdyAttachment.ToolButton1Click(Sender: TObject);
begin
  if ADOQueryMain.IsEmpty then Exit;
  TcxGridToExcel(self.Caption,cxgrid2);
 // SelExportData(Tv2,ADOQueryMain,'客户资料列表');
end;

procedure TfrmZdyAttachment.TBeditClick(Sender: TObject);
begin
  IF CDS_HZ.IsEmpty then exit;
  try
    frmZdyAttInput:=TfrmZdyAttInput.Create(Application);
    with frmZdyAttInput do
    begin
      FCYID:=Trim(Self.CDS_HZ.fieldbyname('ATID').AsString);
      fkhType:=self.fkhType;
      if ShowModal=1 then
      begin
        TBRafresh.Click;
      end;
    end;
  finally
    frmZdyAttInput.Free;
  end;
end;

procedure TfrmZdyAttachment.ToolButton3Click(Sender: TObject);
begin
  try
    frmZdyAttInput:=TfrmZdyAttInput.Create(Application);
    with frmZdyAttInput do
    begin
      fkhType:=self.fkhType;
      FCYID:='';
      if ShowModal=1 then
      begin
        TBRafresh.Click;
      end;
    end;
  finally
    frmZdyAttInput.Free;
  end;
end;

procedure TfrmZdyAttachment.TBuserClick(Sender: TObject);
var
  FuserName:string;
begin
  IF CDS_HZ.IsEmpty then exit;
  frmZDYHelp:=TfrmZDYHelp.Create(self);
  with frmZDYHelp do
  begin
    flag:='UserName';
    FlagName:='操作员';
    IF showmodal=1 then
    begin
      FuserName:=ClientDataSet1.fieldbyname('zdyName').AsString;
    end;
    free;
  end;
  IF trim(FuserName)<>'' then
  begin
    with ADOQueryCmd do
    begin
      Close;
      SQL.Clear;
      sql.Add('update  KH_Zdy_Attachment SET filler='''+trim(FuserName)+''' where ATID='''+Trim(CDS_HZ.fieldbyname('ATID').AsString)+'''');
      ExecSQL;
    end;
    TBRafresh.Click;
  end;
end;

procedure TfrmZdyAttachment.CheckBox1Click(Sender: TObject);
begin
  SelOKNo(CDS_HZ,CheckBox1.Checked);
end;

procedure TfrmZdyAttachment.TchkClick(Sender: TObject);
begin
 if CDS_HZ.IsEmpty then exit;
  if CDS_HZ.Locate('ssel',true,[])=false then
  begin
    Application.MessageBox('没有选择数据!','提示',0);
    Exit;
  end;

 try
   with CDS_HZ do
   begin
     DisableControls;
     First;
     while not eof do
     begin
       iF fieldbyname('ssel').AsBoolean then
       begin
         with ADOQueryCmd do
         begin
           close;
           sql.Clear;
           sql.Add('update  KH_Zdy_Attachment SET status=1,chker='''+trim(DName)+''',chkTime=getdate() ');
           sql.Add('where ATID='+quotedstr(trim(CDS_HZ.fieldbyname('ATID').AsString)));
           execsql;
         end;
       end;
       next;
     end;
     First;
     EnableControls;
    end;
    application.MessageBox('审核成功！','提示信息');
    TBRafresh.Click;
  except
    CDS_HZ.EnableControls;
    application.MessageBox('审核失败！','提示信息',0);
  end;
end;

procedure TfrmZdyAttachment.TNochkClick(Sender: TObject);
begin
  if CDS_HZ.IsEmpty then exit;
  if CDS_HZ.Locate('ssel',true,[])=false then
  begin
    Application.MessageBox('没有选择数据!','提示',0);
    Exit;
  end;
  try
   with CDS_HZ do
   begin
     DisableControls;
     First;
     while not eof do
     begin
       iF fieldbyname('ssel').AsBoolean then
       begin
         with ADOQueryCmd do
         begin
           close;
           sql.Clear;
           sql.Add('update  KH_Zdy_Attachment SET status=0,chker='''',chkTime=null ');
           sql.Add('where ATID='+quotedstr(trim(CDS_HZ.fieldbyname('ATID').AsString)));
           execsql;
         end;
       end;
       next;
     end;
     First;
     EnableControls;
    end;
    application.MessageBox('撤销审核成功！','提示信息');
    TBRafresh.Click;
  except
    CDS_HZ.EnableControls;
    application.MessageBox('撤销审核失败！','提示信息',0);
  end;
end;

procedure TfrmZdyAttachment.FormCreate(Sender: TObject);
begin
  canshu1:=trim(DParameters1);
end;

procedure TfrmZdyAttachment.cxTabControl1Change(Sender: TObject);
begin
  setstatus();
  InitGrid();
end;

procedure TfrmZdyAttachment.ToolButton4Click(Sender: TObject);
begin
  if CDS_HZ.IsEmpty then Exit;
  try
    frmFjList_RZ:=TfrmFjList_RZ.Create(Application);
    with frmFjList_RZ do
    begin
    //  PState:=1;
   //   if Trim(DParameters1)<>'高权限'  then cxButton1.Visible:=false;
      fkeyNO:=Trim(Self.CDS_HZ.fieldbyname('ATID').AsString);
      fType:='客户资料';
      if ShowModal=1 then
      begin

      end;
    end;
  finally
    frmFjList_RZ.Free;
  end;
end;

procedure TfrmZdyAttachment.ToolButton5Click(Sender: TObject);
begin
  IF CDS_HZ.IsEmpty then exit;
  try
    frmZdyAttInput:=TfrmZdyAttInput.Create(Application);
    with frmZdyAttInput do
    begin
      TBsave.Visible:=false;
      FCYID:=Trim(Self.CDS_HZ.fieldbyname('ATID').AsString);
      fkhType:=self.fkhType;
      if ShowModal=1 then
      begin
        TBRafresh.Click;
      end;
    end;
  finally
    frmZdyAttInput.Free;
  end;
end;

procedure TfrmZdyAttachment.ToolButton6Click(Sender: TObject);
var
  fPrintFile:string;
   Txt,fImagePath:string;
   Moudle: THandle;
   Makebar:TMakebar;
   Mixtext:TMixtext;
begin
  IF CDS_HZ.IsEmpty then exit;
        try
          Moudle:=LoadLibrary('MakeQRBarcode.dll');
          @Makebar:=GetProcAddress(Moudle,'Make');
          @Mixtext:=GetProcAddress(Moudle,'MixText');
          Txt:=Trim(CDS_HZ.fieldbyname('ZDYCODE').AsString);
          fImagePath:=ExtractFilePath(Application.ExeName)+'image\temp.bmp' ;
          if not DirectoryExists(pchar(ExtractFilePath(Application.ExeName)+'image')) then
          CreateDirectory(pchar(ExtractFilePath(Application.ExeName)+'image'),nil);
          if FileExists(fImagePath) then DeleteFile(fImagePath);
          Makebar(pchar(Txt),Length(Txt),3,3,0,PChar(fImagePath),3);
        except
          application.MessageBox('条形码生成失败！','提示信息',MB_ICONERROR);
         exit;
        end;

  fPrintFile:=ExtractFilePath(Application.ExeName)+'Report\客户资料信息.rmf' ;
  if FileExists(fPrintFile) then
  begin
    RMVariables['QRBARCODE']:=fImagePath;
    RM1.LoadFromFile(fPrintFile);
 //   Rm2.DefaultCopies:=strtointdef(trim(ComboBox1.Text),1);
   // RM1.ShowReport;
    RM1.PrintReport;
  end
  else
     Application.MessageBox(PChar('没有找到文件'+fPrintFile),'提示',0);


end;

procedure TfrmZdyAttachment.ToolButton7Click(Sender: TObject);
var
  FuserName:string;
begin
  IF CDS_HZ.IsEmpty then exit;
  frmZDYHelp:=TfrmZDYHelp.Create(self);
  with frmZDYHelp do
  begin
    flag:='YWY';
    FlagName:='业务员';
    IF showmodal=1 then
    begin
      FuserName:=ClientDataSet1.fieldbyname('zdyName').AsString;
    end;
    free;
  end;
  IF trim(FuserName)<>'' then
  begin
    with ADOQueryCmd do
    begin
      Close;
      SQL.Clear;
      sql.Add('update  KH_Zdy_Attachment SET DEFstr5='''+trim(FuserName)+''' where ATID='''+Trim(CDS_HZ.fieldbyname('ATID').AsString)+'''');
      ExecSQL;
    end;
    TBRafresh.Click;
  end;
end;

procedure TfrmZdyAttachment.Tv2MouseDown(Sender: TObject;
  Button: TMouseButton; Shift: TShiftState; X, Y: Integer);
begin
  with ADOQueryMain2 do
  begin
    Close;
    sql.Clear;
    sql.Add('select * from KH_ZHXX where ATID='''+Trim(CDS_HZ.fieldbyname('ATID').asstring)+'''');
    Open;

  end;
  SCreateCDS20(ADOQueryMain2,CDS_HZ2);
  SInitCDSData20(ADOQueryMain2,CDS_HZ2);
  with ADOQueryMain3 do
  begin
    Close;
    sql.Clear;
    sql.Add('select * from KH_Zdy_Att_Sub where ATID='''+Trim(CDS_HZ2.fieldbyname('ATID').asstring)+'''');
    Open;
  end;
  SCreateCDS20(ADOQueryMain3,CDS_HZ3);
  SInitCDSData20(ADOQueryMain3,CDS_HZ3);
end;

end.