unit U_MLMangeYH;

interface

uses
  Windows, Messages, SysUtils, Variants, Classes, Graphics, Controls, Forms,
  Dialogs, cxGraphics, cxCustomData, cxStyles, cxTL, cxMaskEdit, DB, ADODB,
  cxInplaceContainer, cxDBTL, cxControls, cxTLData, ComCtrls, ToolWin, StdCtrls,
  cxFilter, cxData, cxDataStorage, cxEdit, cxDBData, DBClient,
  cxGridCustomTableView, cxGridTableView, cxGridDBTableView, ExtCtrls,
  cxSplitter, cxGridLevel, cxClasses, cxGridCustomView, cxGrid,
  cxGridCustomPopupMenu, cxGridPopupMenu, RM_Dataset, RM_System, RM_Common,
  RM_Class, RM_GridReport, IdBaseComponent, IdComponent, IdTCPConnection,
  IdTCPClient, IdFTP, ShellAPI, IniFiles, cxCheckBox, cxTextEdit, cxButtonEdit,
  Menus, cxLookAndFeelPainters, cxButtons, cxImage, BtnEdit, jpeg,
  cxLookAndFeels, cxNavigator;

type
  TfrmMLMangeYH = class(TForm)
    ToolBar1: TToolBar;
    TBRafresh: TToolButton;
    TBClose: TToolButton;
    DataSource1: TDataSource;
    ADOQueryTree: TADOQuery;
    ADOQueryTemp: TADOQuery;
    ADOQueryCmd: TADOQuery;
    cxGridPopupMenu1: TcxGridPopupMenu;
    Panel1: TPanel;
    ToolButton2: TToolButton;
    DataSource2: TDataSource;
    ADOQueryMain: TADOQuery;
    CDS_Main: TClientDataSet;
    ToolButton1: TToolButton;
    RM1: TRMGridReport;
    RMDB_Main: TRMDBDataSet;
    ODPat: TOpenDialog;
    IdFTP1: TIdFTP;
    SaveDialog1: TSaveDialog;
    DataSource3: TDataSource;
    cxGridPopupMenu2: TcxGridPopupMenu;
    Order_GX: TClientDataSet;
    DataSource4: TDataSource;
    cxGridPopupMenu3: TcxGridPopupMenu;
    ML_Col: TClientDataSet;
    DataSource5: TDataSource;
    cxGridPopupMenu4: TcxGridPopupMenu;
    CDS_Sub: TClientDataSet;
    cxStyleRepository1: TcxStyleRepository;
    cxStyle1: TcxStyle;
    cxGridPopupMenu5: TcxGridPopupMenu;
    DataSource6: TDataSource;
    Ord_HX: TClientDataSet;
    ADOQuery1: TADOQuery;
    TCK: TToolButton;
    ToolButton11: TToolButton;
    Panel5: TPanel;
    Label2: TLabel;
    MLXXNO: TEdit;
    Label1: TLabel;
    Label4: TLabel;
    MLName: TEdit;
    MLCF: TEdit;
    cxGrid1: TcxGrid;
    Tv1: TcxGridDBTableView;
    v1MLName: TcxGridDBColumn;
    v1MLMF: TcxGridDBColumn;
    v1MLKZ: TcxGridDBColumn;
    v1Column1: TcxGridDBColumn;
    cxGrid1Level1: TcxGridLevel;
    v1MLXXNO: TcxGridDBColumn;
    Label6: TLabel;
    MLKZ: TEdit;
    PopupMenu1: TPopupMenu;
    N1: TMenuItem;
    N2: TMenuItem;
    N3: TMenuItem;
    N4: TMenuItem;
    Panel2: TPanel;
    cxButton1: TcxButton;
    cxButton2: TcxButton;
    cxButton3: TcxButton;
    Label8: TLabel;
    RM2: TRMGridReport;
    Image1: TImage;
    N5: TMenuItem;
    DY: TMenuItem;
    cxButton4: TcxButton;
    ToolButton3: TToolButton;
    Label3: TLabel;
    MLMF: TEdit;
    Tv1Column1: TcxGridDBColumn;
    LX: TComboBox;
    Label5: TLabel;
    Tv1Column2: TcxGridDBColumn;
    Tv1Column3: TcxGridDBColumn;
    Label7: TLabel;
    GYLXName: TEdit;
    procedure FormDestroy(Sender: TObject);
    procedure FormClose(Sender: TObject; var Action: TCloseAction);
    procedure TBCloseClick(Sender: TObject);
    procedure FormShow(Sender: TObject);
    procedure cxDBTreeList1DblClick(Sender: TObject);
    procedure TBRafreshClick(Sender: TObject);
    procedure ToolButton2Click(Sender: TObject);
    procedure ToolButton1Click(Sender: TObject);
    procedure Tv1MouseDown(Sender: TObject; Button: TMouseButton; Shift: TShiftState; X, Y: Integer);
    procedure ToolButton10Click(Sender: TObject);
    procedure TV4CellClick(Sender: TcxCustomGridTableView; ACellViewInfo: TcxGridTableDataCellViewInfo; AButton: TMouseButton; AShift: TShiftState; var AHandled: Boolean);
    procedure Tv1DblClick(Sender: TObject);
    procedure FormCreate(Sender: TObject);
    procedure N2Click(Sender: TObject);
    procedure HXTypeChange(Sender: TObject);
    procedure cxButton1Click(Sender: TObject);
    procedure Image1Click(Sender: TObject);
    procedure DYClick(Sender: TObject);
    procedure ToolButton3Click(Sender: TObject);
  private
    { Private declarations }
    PState: Integer;
    FCPID, FTopID: string;
    procedure InitTree();
    procedure InitGrid();
    procedure ReadINIFile();
  public
    canshu1: string;
    { Public declarations }
  end;

var
  frmMLMangeYH: TfrmMLMangeYH;

implementation

uses
  U_DataLink, U_Fun, U_SCPerson;
//  ,U_MLManage_LR,U_BPZdy_LR,U_BPZdy_SH,U_MLManage_LRRS,U_HXKTJ,
//  U_MLManage_FHLR,U_MLManage_ZHLR,U_BPZdy_HXK,U_MLMange_CX,U_BPZdy_LRPB,U_BPZdy_LRGX,U_BPZdy_ColTJ,
//  U_CPManage_TP,U_BPZdy_LRSHK, U_BPZdy_PanelCX,U_BPZdy_Panel,U_MLManage_LRTJ,U_MLManage_LRTJ_Ceshi1,
//  ,U_MLManage_LRYH,U_MLManage_LRYHDY,U_MLManage_LRYHCE;

{$R *.dfm}

procedure TfrmMLMangeYH.InitTree();
begin

end;

procedure TfrmMLMangeYH.InitGrid();
begin
  try
    ADOQueryMain.DisableControls;
    with ADOQueryMain do
    begin
      Close;
      SQL.Clear;
      SQL.Add('select MLID,YPPrice,MLXXNO=TJML,MLName,MLMF,MLKZ,MLCF,LX=''印花面料'',GYLXName=MLXXGYName ');
      sql.Add(' from ML_Manage A ');
      sql.Add(' where isnull(A.MLType,'''')=''印花面料'' ');
      SQL.Add(' UNION all');
      SQL.Add(' select MLID,YPPrice,MLXXNO=MLNo,MLName,MLMF,MLKZ,MLCF,LX=''染色面料'',GYLXName ');
      sql.Add(' from ML_Manage A ');
      sql.Add(' where isnull(A.MLType,'''')=''染色面料'' ');
      SQL.Add(' UNION all');
      SQL.Add(' select MLID,YPPrice,MLXXNO=TJML,MLName,MLMF,MLKZ,MLCF,LX=''烫金面料'',GYLXName=MLXXGYName ');
      sql.Add(' from ML_Manage A ');
      sql.Add(' where isnull(A.MLType,'''')=''烫金面料'' ');
      Open;
    end;
    SCreateCDS20(ADOQueryMain, CDS_Main);
    SInitCDSData20(ADOQueryMain, CDS_Main);
  finally
    ADOQueryMain.EnableControls;
  end;
end;

procedure TfrmMLMangeYH.FormDestroy(Sender: TObject);
begin
  frmMLMangeYH := nil;
end;

procedure TfrmMLMangeYH.FormClose(Sender: TObject; var Action: TCloseAction);
begin
  Action := caFree;
end;

procedure TfrmMLMangeYH.TBCloseClick(Sender: TObject);
begin
  WriteCxGrid('印花面料2', Tv1, '样品管理');
  Close;
end;

procedure TfrmMLMangeYH.FormShow(Sender: TObject);
begin
  {if canshu1='高权限' then
  begin
    toolbutton11.Visible:=True;
    ToolButton3.Visible:=true;
    TBDel.Visible:=true;
  end
  else
  begin
    if canshu1='查询' then
    begin
      toolbutton11.Visible:=false;
      ToolButton3.Visible:=false;
      TBDel.Visible:=false;
    end
    else
    begin
      toolbutton11.Visible:=false;
      ToolButton3.Visible:=false;
      TBDel.Visible:=false;
    end;
  end;}
  InitGrid();
  ReadCxGrid('印花面料2', Tv1, '样品管理');
end;

procedure TfrmMLMangeYH.cxDBTreeList1DblClick(Sender: TObject);
begin
  InitGrid();
end;

procedure TfrmMLMangeYH.TBRafreshClick(Sender: TObject);
begin
  InitGrid();
  if ADOQueryMain.Active then
  begin
    SDofilter(ADOQueryMain, SGetFilters(Panel1, 1, 2));
    SCreateCDS20(ADOQueryMain, CDS_Main);
    SInitCDSData20(ADOQueryMain, CDS_Main);
  end;
end;

procedure TfrmMLMangeYH.ToolButton2Click(Sender: TObject);
begin
  if ADOQueryMain.Active then
  begin
    SDofilter(ADOQueryMain, SGetFilters(Panel5, 1, 2));
    SCreateCDS20(ADOQueryMain, CDS_Main);
    SInitCDSData20(ADOQueryMain, CDS_Main);
  end;
end;

procedure TfrmMLMangeYH.ToolButton1Click(Sender: TObject);
begin
  if CDS_Main.IsEmpty then
    Exit;
  TcxGridToExcel('客户拿样', cxGrid1);
end;

procedure TfrmMLMangeYH.ReadINIFile();
var
  programIni: Tinifile;  //配置文件名
  FileName: string;
begin
  FileName := ExtractFilePath(Paramstr(0)) + 'SYSTEMSET.INI';
  programIni := Tinifile.create(FileName);
  server := programIni.ReadString('SERVER', '服务器地址', '127.0.0.1');
  programIni.Free;
end;

procedure TfrmMLMangeYH.Tv1MouseDown(Sender: TObject; Button: TMouseButton; Shift: TShiftState; X, Y: Integer);
begin
  with ADOQueryCmd do
  begin
    Close;
    SQL.Clear;
    sql.Add(' select A.*,isnull(B.BPCode,C.MLNo) BPCode,isnull(B.BPName,C.MLName) BPName');
    sql.Add(' ,isnull(B.BPMF,C.MLMF) BPMF,isnull(B.BPKZ,C.MLKZ) BPKZ');
    sql.Add(',B.BPJS,B.BPWS,B.BPMiDu,B.BPUnit,C.MLDLNo,C.DLHXK');
    SQL.Add(' from ML_Manage_PB A left join BP_ZDY B on B.BPID=A.BPID ');
    sql.Add(' left join ML_Manage C on C.MLID=A.BPID');
    sql.Add(' where A.MLID=''' + Trim(CDS_Main.fieldbyname('MLID').AsString) + '''');
    //ShowMessage(sql.Text);
    Open;
  end;
  SCreateCDS20(ADOQueryCmd, CDS_Sub);
  SInitCDSData20(ADOQueryCmd, CDS_Sub);
  with ADOQueryCmd do
  begin
    Close;
    SQL.Clear;
    sql.Add(' select A.*,B.*,C.* from ML_Manage_GX A inner join BP_ZDY B on B.BPID=A.BPID ');
    sql.Add('inner join BP_ZDY_Sub C on C.BPSubID=A.BPSubID');
    sql.Add(' where A.MLID=''' + Trim(CDS_Main.fieldbyname('MLID').AsString) + '''');
    Open;
  end;
  SCreateCDS20(ADOQueryCmd, Order_GX);
  SInitCDSData20(ADOQueryCmd, Order_GX);
  //if CDS_Main.FieldByName('MLType').AsString<>'复合' then
  begin
    //if CDS_Main.FieldByName('MLType').AsString<>'组合' then
    begin
      with ADOQueryCmd do
      begin
        Close;
        SQL.Clear;
        sql.Add('select * from BP_ZDY_Sub ');
        sql.Add('where BPCode=''' + Trim(CDS_Main.fieldbyname('MLDLNo').AsString) + ''' and BPflag=''SHK''');
        Open;
      end;
      SCreateCDS20(ADOQueryCmd, ML_Col);
      SInitCDSData20(ADOQueryCmd, ML_Col);
    end;
    with ADOQueryCmd do
    begin
      Close;
      SQL.Clear;
      sql.Add('select A.*,B.* from BP_ZDY_Sub A ');
      Sql.Add('inner join KH_Zdy_Attachment B on A.HXATID=B.ATID and B.Type=''CPHX''');
      sql.Add(' where A.BPCode=''' + trim(CDS_Main.fieldbyname('DLHXK').AsString) + '''');
      open;
    end;
    SCreateCDS20(ADOQueryCmd, Ord_HX);
    SInitCDSData20(ADOQueryCmd, Ord_HX);
  end;
end;

procedure TfrmMLMangeYH.ToolButton10Click(Sender: TObject);
begin
  {if RadioGroup1.ItemIndex=-1 then
  begin
    application.MessageBox('请选择工序','提示');
    exit;
  end;}

end;

procedure TfrmMLMangeYH.TV4CellClick(Sender: TcxCustomGridTableView; ACellViewInfo: TcxGridTableDataCellViewInfo; AButton: TMouseButton; AShift: TShiftState; var AHandled: Boolean);
begin
  //if CDS_Main.FieldByName('MLType').AsString='复合' then
  begin
    with ADOQuery1 do
    begin
      Close;
      SQL.Clear;
      sql.Add('select * from BP_ZDY_Sub ');
      sql.Add('where BPCode=''' + Trim(CDS_Sub.Fieldbyname('MLDLNo').AsString) + ''' and BPflag=''SHK''');
      Open;
    end;
    SCreateCDS20(ADOQuery1, ML_Col);
    SInitCDSData20(ADOQuery1, ML_Col);
    with ADOQuery1 do
    begin
      Close;
      SQL.Clear;
      sql.Add('select A.*,B.* from BP_ZDY_Sub A ');
      Sql.Add('inner join KH_Zdy_Attachment B on A.HXATID=B.ATID and B.Type=''CPHX''');
      sql.Add(' where A.BPCode=''' + trim(CDS_Sub.Fieldbyname('DLHXK').AsString) + '''');
      open;
    end;
    SCreateCDS20(ADOQuery1, Ord_HX);
    SInitCDSData20(ADOQuery1, Ord_HX);
  end;
end;

procedure TfrmMLMangeYH.Tv1DblClick(Sender: TObject);
begin
  if CDS_Main.IsEmpty then
    exit;
  self.ModalResult := 1;
end;

procedure TfrmMLMangeYH.FormCreate(Sender: TObject);
begin
  canshu1 := Trim(DParameters1);
end;

procedure TfrmMLMangeYH.N2Click(Sender: TObject);
begin
  if CDS_Main.IsEmpty then
    Exit;
  with ADOQueryCmd do
  begin
    close;
    sql.Clear;
    SQL.Add('select * from ML_Manage A ');
    sql.Add(' where isnull(A.MLType,'''')=''印花面料''');
    sql.Add(' and TJML=''' + trim(CDS_Main.fieldbyname('TJML').AsString) + '''');
    Open;
  end;
  if ADOQueryCmd.RecordCount = 1 then
  begin
    Application.MessageBox('印花编号只有一条,不能删除', '提示');
    exit;
  end;
  with ADOQueryCmd do
  begin
    close;
    sql.Clear;
    SQL.Add('select * from BP_DY ');
    sql.Add('where MLID=''' + trim(CDS_Main.fieldbyname('MLID').AsString) + '''');
    Open;
  end;
  if ADOQueryCmd.IsEmpty = false then
  begin
    if Application.MessageBox('数据已打印确定要删除吗?', '提示', 32 + 4) <> IDYES then
      Exit;
    //exit;
  end
  else
  begin
    if Application.MessageBox('确定要删除数据吗？', '提示', 32 + 4) <> IDYES then
      Exit;
  end;
  with ADOQueryCmd do
  begin
    Close;
    SQL.Clear;
    sql.Add('delete ML_Manage where MLID=''' + Trim(CDS_Main.fieldbyname('MLID').AsString) + '''');
    sql.Add('delete ML_Manage_PB where MLID=''' + Trim(CDS_Main.fieldbyname('MLID').AsString) + '''');
    sql.Add('delete ML_Manage_GX where MLID=''' + Trim(CDS_Main.fieldbyname('MLID').AsString) + '''');
    sql.Add('delete Image_Info where TJML=''' + Trim(CDS_Main.fieldbyname('TJML').AsString) + '''');
    sql.Add(' and TJGYName=''' + Trim(CDS_Main.fieldbyname('TJGYName').AsString) + '''');
    ExecSQL;
  end;
  CDS_Main.Delete;
end;

procedure TfrmMLMangeYH.HXTypeChange(Sender: TObject);
begin
  ToolButton2.Click;
end;

procedure TfrmMLMangeYH.cxButton1Click(Sender: TObject);
var
  fPrintFile, Txt, fImagePath, maxno: string;
  i, j: Integer;
  Moudle: THandle;
  Makebar: TMakebar;
  Mixtext: TMixtext;
begin
  if CDS_Main.IsEmpty then
    Exit;
  fPrintFile := ExtractFilePath(Application.ExeName) + 'Report\印花面料标签.rmf';
  if FileExists(fPrintFile) = False then
  begin
    Application.MessageBox(PChar('没有找' + ExtractFilePath(Application.ExeName) + 'Report\印花面料标签.rmf'), '提示', 0);
    exit;
  end;
  CDS_Main.DisableControls;
  with CDS_Main do
  begin
    //First;
    //while Locate('SSel',True,[]) do
    begin
      try
        ADOQueryCmd.Connection.BeginTrans;
        if GetLSNo(ADOQueryCmd, maxno, 'TGML', 'BP_DY', 4, 1, ) = False then
        begin
          ADOQueryCmd.Connection.RollbackTrans;
          Application.MessageBox('取样品打印最大号失败!', '提示', 0);
          Exit;
        end;
        with ADOQueryCmd do
        begin
          Close;
          sql.Clear;
          SQL.Add('select * from BP_DY where DYId=''' + Trim(maxno) + '''');
          Open;
        end;
        with ADOQueryCmd do
        begin
          Append;
          FieldByName('MLID').Value := Trim(CDS_Main.fieldbyname('MLID').AsString);
          FieldByName('TFID').Value := Trim(CDS_Main.fieldbyname('PTID').AsString);
          FieldByName('DYId').Value := Trim(maxno);
          FieldByName('Filler').Value := Trim(DName);
          FieldByName('FillerCode').Value := Trim(DCode);
          FieldByName('Valid').Value := 'Y';
          Post;
        end;
        ADOQueryCmd.Connection.CommitTrans;
      except
        ADOQueryCmd.Connection.RollbackTrans;
        Application.MessageBox('保存打印流水号异常！', '提示', 0);
        Exit;
      end;
      try
        Moudle := LoadLibrary('MakeQRBarcode.dll');
        @Makebar := GetProcAddress(Moudle, 'Make');
        @Mixtext := GetProcAddress(Moudle, 'MixText');
        Txt := Trim(maxno);
        fImagePath := ExtractFilePath(Application.ExeName) + 'image\temp.bmp';
        if not DirectoryExists(pchar(ExtractFilePath(Application.ExeName) + 'image')) then
          CreateDirectory(pchar(ExtractFilePath(Application.ExeName) + 'image'), nil);
        if FileExists(fImagePath) then
          DeleteFile(fImagePath);
        Makebar(pchar(Txt), Length(Txt), 3, 3, 0, PChar(fImagePath), 3);
      except
        application.MessageBox('二维码生成失败！', '提示信息', MB_ICONERROR);
        exit;
      end;
      RMVariables['QRBARCODE'] := fImagePath;
      RMVariables['DYID'] := maxno;
      RM1.LoadFromFile(fPrintFile);
      //RM1.ShowReport;
      RM1.PrintReport;
    end;
  end;
  CDS_Main.EnableControls;
  panel2.Visible := false;
end;

procedure TfrmMLMangeYH.Image1Click(Sender: TObject);
begin
  panel2.Visible := False;
end;

procedure TfrmMLMangeYH.DYClick(Sender: TObject);
begin
  Panel2.Visible := true;
end;

procedure TfrmMLMangeYH.ToolButton3Click(Sender: TObject);
begin
  if CDS_Main.IsEmpty then
    exit;
  self.ModalResult := 1;
end;

end.