unit U_DJBCKOutListSEL;

interface

uses
  Windows, Messages, SysUtils, Variants, Classes, Graphics, Controls, Forms,
  Dialogs, cxStyles, cxCustomData, cxGraphics, cxFilter, cxData, cxDataStorage,
  cxEdit, DB, cxDBData, cxGridCustomTableView, cxGridTableView,
  cxGridBandedTableView, cxGridDBBandedTableView, cxGridLevel, cxClasses,
  cxControls, cxGridCustomView, cxGridDBTableView, cxGrid, StdCtrls, ComCtrls,
  ExtCtrls, ToolWin, cxGridCustomPopupMenu, cxGridPopupMenu, ADODB, DBClient,
  cxDropDownEdit, cxCheckBox, RM_Common, RM_Class, RM_e_Xls, RM_Dataset,
  RM_System, RM_GridReport, Menus, cxCalendar, cxButtonEdit, cxTextEdit,
  RM_BarCode, cxLookAndFeels, cxLookAndFeelPainters, cxNavigator;

type
  TfrmDJBCKOutListSEL = class(TForm)
    ToolBar1: TToolBar;
    TBRafresh: TToolButton;
    TBFind: TToolButton;
    TBClose: TToolButton;
    Panel1: TPanel;
    ADOQueryCmd: TADOQuery;
    ADOQueryMain: TADOQuery;
    ADOQueryTemp: TADOQuery;
    DataSource1: TDataSource;
    cxGridPopupMenu1: TcxGridPopupMenu;
    Label1: TLabel;
    Label2: TLabel;
    BegDate: TDateTimePicker;
    EndDate: TDateTimePicker;
    CDS_Main: TClientDataSet;
    RMDBMain: TRMDBDataSet;
    RMXLSExport1: TRMXLSExport;
    RMDBHZ: TRMDBDataSet;
    CDS_HZ: TClientDataSet;
    CDS_PRT: TClientDataSet;
    PopupMenu1: TPopupMenu;
    N1: TMenuItem;
    N2: TMenuItem;
    cxGrid2: TcxGrid;
    Tv1: TcxGridDBTableView;
    v1Column6: TcxGridDBColumn;
    v1Column2: TcxGridDBColumn;
    v1Column4: TcxGridDBColumn;
    v1Column13: TcxGridDBColumn;
    v1Column14: TcxGridDBColumn;
    v2Column1: TcxGridDBColumn;
    v1Column8: TcxGridDBColumn;
    v1Column7: TcxGridDBColumn;
    v1Column1: TcxGridDBColumn;
    v1Column10: TcxGridDBColumn;
    v1Column16: TcxGridDBColumn;
    v1Column9: TcxGridDBColumn;
    v2Column6: TcxGridDBColumn;
    v1Column3: TcxGridDBColumn;
    v1Column11: TcxGridDBColumn;
    v1Column5: TcxGridDBColumn;
    v1Column19: TcxGridDBColumn;
    v1Column17: TcxGridDBColumn;
    v1Column12: TcxGridDBColumn;
    cxGrid2Level1: TcxGridLevel;
    Label3: TLabel;
    Label4: TLabel;
    Label5: TLabel;
    Label8: TLabel;
    Label12: TLabel;
    Label6: TLabel;
    Label7: TLabel;
    SPName: TEdit;
    FactoryName: TEdit;
    SPID: TEdit;
    CONNO: TEdit;
    CRType: TComboBox;
    KHPO: TEdit;
    QCorderNo: TEdit;
    Label10: TLabel;
    CKorderNo: TEdit;
    Label11: TLabel;
    FromFactoryName: TEdit;
    Label13: TLabel;
    ToFactoryName: TEdit;
    Label9: TLabel;
    Label14: TLabel;
    RCGangNo: TEdit;
    GangNo: TEdit;
    v1Column15: TcxGridDBColumn;
    v1Column20: TcxGridDBColumn;
    ADOQueryPrint: TADOQuery;
    v1Column21: TcxGridDBColumn;
    Label15: TLabel;
    SPColor: TEdit;
    Label16: TLabel;
    spcolorno: TEdit;
    Label17: TLabel;
    SPHX: TEdit;
    RM1: TRMGridReport;
    RMBarCodeObject1: TRMBarCodeObject;
    v1Column22: TcxGridDBColumn;
    v1Column23: TcxGridDBColumn;
    v1Column24: TcxGridDBColumn;
    Label18: TLabel;
    CustomerNoName: TEdit;
    N3: TMenuItem;
    v1Column18: TcxGridDBColumn;
    v1Column25: TcxGridDBColumn;
    v1Column26: TcxGridDBColumn;
    v1Column27: TcxGridDBColumn;
    v1Column28: TcxGridDBColumn;
    v1Column29: TcxGridDBColumn;
    Label19: TLabel;
    Edit1: TEdit;
    Tv1Column1: TcxGridDBColumn;
    ToolButton1: TToolButton;
    procedure FormDestroy(Sender: TObject);
    procedure FormClose(Sender: TObject; var Action: TCloseAction);
    procedure FormCreate(Sender: TObject);
    procedure TBRafreshClick(Sender: TObject);
    procedure ConNoMChange(Sender: TObject);
    procedure TBCloseClick(Sender: TObject);
    procedure FormShow(Sender: TObject);
    procedure TBExportClick(Sender: TObject);
    procedure TBFindClick(Sender: TObject);
    procedure SPNameChange(Sender: TObject);
    procedure SPIDKeyPress(Sender: TObject; var Key: Char);
    procedure N1Click(Sender: TObject);
    procedure N2Click(Sender: TObject);
    procedure ToolButton3Click(Sender: TObject);
    procedure Tv1MouseDown(Sender: TObject; Button: TMouseButton; Shift: TShiftState; X, Y: Integer);
    procedure N3Click(Sender: TObject);
    procedure ToolButton1Click(Sender: TObject);
  private
    canshu1, canshu2: string;
    procedure InitGrid();
    { Private declarations }
  public
    { Public declarations }
  end;

var
  frmDJBCKOutListSEL: TfrmDJBCKOutListSEL;

implementation

uses
  U_DataLink, U_RTFun, U_Fun;

{$R *.dfm}

procedure TfrmDJBCKOutListSEL.FormDestroy(Sender: TObject);
begin
  frmDJBCKOutListSEL := nil;
end;

procedure TfrmDJBCKOutListSEL.FormClose(Sender: TObject; var Action: TCloseAction);
begin
  Action := caFree;
end;

procedure TfrmDJBCKOutListSEL.FormCreate(Sender: TObject);
begin
  //cxGrid1.Align:=alClient;
  canshu1 := Trim(DParameters1);
  canshu2 := Trim(DParameters2);
  EndDate.DateTime := SGetServerDate10(ADOQueryTemp);
  BegDate.DateTime := EndDate.DateTime - 30;
end;

procedure TfrmDJBCKOutListSEL.InitGrid();
begin
  try
    ADOQueryMain.DisableControls;
    with ADOQueryMain do
    begin
      Filtered := False;
      Close;
      sql.Clear;
      sql.Add(' select A.*,KHPO=(SELECT KHPO FROM JYORDER_SUB B WHERE B.SUBID=A.ORDSubIdCK)  ');
      sql.Add(' from CK_SXPB_CR A');
      sql.add(' where A.CRTime>=' + quotedstr(Trim(FormatDateTime('yyyy-MM-dd', BegDate.DateTime))) + ' and A.CRTime<' + quotedstr(Trim(FormatDateTime('yyyy-MM-dd', enddate.DateTime + 1))));
      SQL.Add(' and CRFlag=''出库''  ');
      SQL.Add(' and isnull(CKName,'''')=''待检布'' ');
      SQL.Add('ORDER BY FILLTIME DESC');
      Open;
    end;
    SCreateCDS20(ADOQueryMain, CDS_Main);
    SInitCDSData20(ADOQueryMain, CDS_Main);
  finally
    ADOQueryMain.EnableControls;
  end;
end;

procedure TfrmDJBCKOutListSEL.TBRafreshClick(Sender: TObject);
begin
  BegDate.SetFocus;
  InitGrid();
end;

procedure TfrmDJBCKOutListSEL.ConNoMChange(Sender: TObject);
begin
  if ADOQueryMain.Active then
  begin
    SDofilter(ADOQueryMain, SGetFilters(Panel1, 1, 2));
  end;
end;

procedure TfrmDJBCKOutListSEL.TBCloseClick(Sender: TObject);
begin
  WriteCxGrid(self.caption, Tv1, '外加工仓库');
  Close;
end;

procedure TfrmDJBCKOutListSEL.FormShow(Sender: TObject);
begin

  ReadCxGrid(self.caption, Tv1, '外加工仓库');
  //InitGrid();
end;

procedure TfrmDJBCKOutListSEL.TBExportClick(Sender: TObject);
begin
  if ADOQueryMain.IsEmpty then
    exit;
  TcxGridToExcel('外加工出库列表', cxGrid2);
end;

procedure TfrmDJBCKOutListSEL.TBFindClick(Sender: TObject);
begin
  if ADOQueryMain.Active then
  begin
    SDofilter(ADOQueryMain, SGetFilters(Panel1, 1, 2));
    SCreateCDS20(ADOQueryMain, CDS_Main);
    SInitCDSData20(ADOQueryMain, CDS_Main);
  end;
end;

procedure TfrmDJBCKOutListSEL.SPNameChange(Sender: TObject);
begin
  TBFind.Click;
end;

procedure TfrmDJBCKOutListSEL.SPIDKeyPress(Sender: TObject; var Key: Char);
begin
  if Key = #13 then
  begin
    {if Length(Trim(SPID.Text))<4 then Exit;
    try
      ADOQueryMain.DisableControls;
      with ADOQueryMain do
      begin
        Filtered:=False;
        Close;
        sql.Clear;
        sql.Add(' select A.* ');
        sql.Add(' from CK_SXPB_CR A');
        sql.add(' where SPID like :SXID');
        Parameters.ParamByName('SXID').Value:='%'+Trim(SXID.Text)+'%';
        Open;
        //ShowMessage(SQL.Text);
      end;
      SCreateCDS20(ADOQueryMain,CDS_Main);
      SInitCDSData20(ADOQueryMain,CDS_Main);
    finally
      ADOQueryMain.EnableControls;
    end; }
  end;
end;

procedure TfrmDJBCKOutListSEL.N1Click(Sender: TObject);
begin
  if CDS_Main.IsEmpty then
    Exit;
  CDS_Main.DisableControls;
  with CDS_Main do
  begin
    First;
    while not eof do
    begin
      if Trim(CDS_Main.fieldbyname('CRType').AsString) = '检验出库' then
      begin
        Edit;
        FieldByName('SSel').Value := True;
        Post;
      end;
      Next;
    end;
  end;
  CDS_Main.EnableControls;
end;

procedure TfrmDJBCKOutListSEL.N2Click(Sender: TObject);
begin
  SelOKNo(CDS_Main, False);
end;

procedure TfrmDJBCKOutListSEL.ToolButton3Click(Sender: TObject);
var
  fPrintFile: string;
  Txt, fImagePath: string;
  Moudle: THandle;
  Makebar: TMakebar;
  Mixtext: TMixtext;
begin
  if CDS_Main.IsEmpty then
    Exit;
  //if Trim(CDS_Main.fieldbyname('CRType').AsString)<>'检验出库' then Exit;
  if CDS_Main.Locate('SSel', True, []) = False then
  begin
    Application.MessageBox('没有选择数据!', '提示', 0);
    Exit;
  end;
  ExportFtErpFile('检验指示单标签.rmf', ADOQueryTemp);
  fPrintFile := ExtractFilePath(Application.ExeName) + 'Report\检验指示单标签.rmf';
  CDS_Main.DisableControls;
  with CDS_Main do
  begin
    First;
    while CDS_Main.Locate('SSel', True, []) do
    begin
      with ADOQueryPrint do
      begin
        Close;
        sql.Clear;
        sql.Add(' select A.* ,B.SOrddefstr1,B.PRTColor,B.PRTHX,C.OrderNo,C.MPRTCodeName');
        sql.Add(',C.CustomerNoName,C.ConNo');
        sql.Add(',khCode=(select zdyNameZ from KH_Zdy_Attachment X where X.zdyname=C.CustomerNoName and X.Type=''KHName'') ');
        sql.Add(',khConNo=(select top 1 khConNo from JYOrderCon_Main X where X.ConNO=C.conNO) ');
        sql.Add(' from CK_SXPB_CR A');
        sql.Add(' left join JYOrder_Sub B on A.ORDSubIdCK=B.SubId');
        sql.Add(' left join JYOrder_Main C on A.ORDMainIdCK=C.MainId');

        sql.Add(' where A.SPId=''' + Trim(CDS_Main.fieldbyname('SPId').AsString) + '''');
        Open;
      end;
      SCreateCDS20(ADOQueryPrint, CDS_PRT);
      SInitCDSData20(ADOQueryPrint, CDS_PRT);

      try
        Moudle := LoadLibrary('MakeQRBarcode.dll');
        @Makebar := GetProcAddress(Moudle, 'Make');
        @Mixtext := GetProcAddress(Moudle, 'MixText');
        Txt := Trim(CDS_PRT.fieldbyname('SPID').AsString);
        fImagePath := ExtractFilePath(Application.ExeName) + 'image\temp.bmp';
        if not DirectoryExists(pchar(ExtractFilePath(Application.ExeName) + 'image')) then
          CreateDirectory(pchar(ExtractFilePath(Application.ExeName) + 'image'), nil);
        if FileExists(fImagePath) then
          DeleteFile(fImagePath);
        Makebar(pchar(Txt), Length(Txt), 3, 3, 0, PChar(fImagePath), 3);
      except
        CDS_Main.EnableControls;
        application.MessageBox('条形码生成失败！', '提示信息', MB_ICONERROR);
        exit;
      end;

      if FileExists(fPrintFile) then
      begin
        RMVariables['QRBARCODE'] := fImagePath;
        RM1.LoadFromFile(fPrintFile);
        //RM1.ShowReport;
        RM1.PrintReport;
      end
      else
      begin
        CDS_Main.EnableControls;
        Application.MessageBox(PChar('没有找' + ExtractFilePath(Application.ExeName) + 'Report\检验指示单标签.rmf'), '提示', 0);
        Exit;
      end;
      Edit;
      FieldByName('SSel').Value := False;
      Post;
    end;
  end;
  CDS_Main.EnableControls;

end;

procedure TfrmDJBCKOutListSEL.Tv1MouseDown(Sender: TObject; Button: TMouseButton; Shift: TShiftState; X, Y: Integer);
begin
//  if CDS_Main.IsEmpty then Exit;
//  if Trim(CDS_Main.fieldbyname('CRType').AsString)<>'检验出库' then
//  begin
//    Tv1.OptionsSelection.CellSelect:=False;
//  end else
//  begin
//    Tv1.OptionsSelection.CellSelect:=True;
//  end;
end;

procedure TfrmDJBCKOutListSEL.N3Click(Sender: TObject);
begin
  if CDS_Main.IsEmpty then
    Exit;
  CDS_Main.DisableControls;
  with CDS_Main do
  begin
    First;
    while not eof do
    begin
      Edit;
      FieldByName('SSel').Value := True;
      Post;
      Next;
    end;
  end;
  CDS_Main.EnableControls;
end;

procedure TfrmDJBCKOutListSEL.ToolButton1Click(Sender: TObject);
var
  fPrintFile: string;
var
  WSql: string;
begin
  if CDS_Main.IsEmpty then
    Exit;
  ModalResult := 1;
end;

end.