unit U_DJBCKList;

interface

uses
  Windows, Messages, SysUtils, Variants, Classes, Graphics, Controls, Forms,
  Dialogs, cxStyles, cxCustomData, cxGraphics, cxFilter, cxData, cxDataStorage,
  cxEdit, DB, cxDBData, cxGridCustomTableView, cxGridTableView,
  cxGridBandedTableView, cxGridDBBandedTableView, cxGridLevel, cxClasses,
  cxControls, cxGridCustomView, cxGridDBTableView, cxGrid, StdCtrls, ComCtrls,
  ExtCtrls, ToolWin, cxGridCustomPopupMenu, cxGridPopupMenu, ADODB, DBClient,
  cxDropDownEdit, cxCheckBox, RM_Common, RM_Class, RM_e_Xls, RM_Dataset,
  RM_System, RM_GridReport, Menus, cxCalendar, cxButtonEdit, cxTextEdit, BtnEdit,
  cxPC, cxLookAndFeels, cxLookAndFeelPainters, cxNavigator;

type
  TfrmDJBCKList = class(TForm)
    ToolBar1: TToolBar;
    TBRafresh: TToolButton;
    TBFind: TToolButton;
    TBExport: TToolButton;
    TBClose: TToolButton;
    Panel1: TPanel;
    ADOQueryCmd: TADOQuery;
    ADOQueryMain: TADOQuery;
    ADOQueryTemp: TADOQuery;
    DataSource1: TDataSource;
    cxGridPopupMenu1: TcxGridPopupMenu;
    Label1: TLabel;
    Label2: TLabel;
    BegDate: TDateTimePicker;
    EndDate: TDateTimePicker;
    CDS_Main: TClientDataSet;
    RM1: TRMGridReport;
    RMDBMain: TRMDBDataSet;
    RMXLSExport1: TRMXLSExport;
    RMDBHZ: TRMDBDataSet;
    CDS_HZ: TClientDataSet;
    CDS_PRT: TClientDataSet;
    TBDel: TToolButton;
    PopupMenu1: TPopupMenu;
    N1: TMenuItem;
    N2: TMenuItem;
    TBAdd: TToolButton;
    TBEdit: TToolButton;
    Label3: TLabel;
    Label4: TLabel;
    Label5: TLabel;
    Label8: TLabel;
    SPName: TEdit;
    FactoryName: TEdit;
    SPID: TEdit;
    SPSpec: TEdit;
    Label6: TLabel;
    SPCF: TEdit;
    Label7: TLabel;
    OrderNo: TEdit;
    cxGrid2: TcxGrid;
    Tv1: TcxGridDBTableView;
    v1Column2: TcxGridDBColumn;
    v1Column4: TcxGridDBColumn;
    v1Column13: TcxGridDBColumn;
    v1Column14: TcxGridDBColumn;
    v2Column1: TcxGridDBColumn;
    v1Column8: TcxGridDBColumn;
    v1Column7: TcxGridDBColumn;
    v1Column1: TcxGridDBColumn;
    v1Column10: TcxGridDBColumn;
    v1Column11: TcxGridDBColumn;
    v1Column9: TcxGridDBColumn;
    v2Column6: TcxGridDBColumn;
    v1Column3: TcxGridDBColumn;
    v1Column16: TcxGridDBColumn;
    v1Column12: TcxGridDBColumn;
    cxGrid2Level1: TcxGridLevel;
    Label12: TLabel;
    CRType: TComboBox;
    v1Column19: TcxGridDBColumn;
    Label11: TLabel;
    RCGangNo: TEdit;
    ADOQueryPrint: TADOQuery;
    v1Column21: TcxGridDBColumn;
    v1Column22: TcxGridDBColumn;
    Label16: TLabel;
    PBFactoryName: TEdit;
    v1Column5: TcxGridDBColumn;
    v1Column15: TcxGridDBColumn;
    v1Column17: TcxGridDBColumn;
    v1Column18: TcxGridDBColumn;
    v1Column20: TcxGridDBColumn;
    v1Column23: TcxGridDBColumn;
    v1Column24: TcxGridDBColumn;
    Label9: TLabel;
    conno: TEdit;
    v1Column25: TcxGridDBColumn;
    Label10: TLabel;
    SPColor: TEdit;
    ToolButton1: TToolButton;
    ToolButton2: TToolButton;
    procedure FormClose(Sender: TObject; var Action: TCloseAction);
    procedure FormCreate(Sender: TObject);
    procedure TBRafreshClick(Sender: TObject);
    procedure ConNoMChange(Sender: TObject);
    procedure TBCloseClick(Sender: TObject);
    procedure FormShow(Sender: TObject);
    procedure TBExportClick(Sender: TObject);
    procedure TBFindClick(Sender: TObject);
    procedure N1Click(Sender: TObject);
    procedure N2Click(Sender: TObject);
    procedure TBDelClick(Sender: TObject);
    procedure TBAddClick(Sender: TObject);
    procedure TBEditClick(Sender: TObject);
    procedure SPIDKeyPress(Sender: TObject; var Key: Char);
    procedure SPIDChange(Sender: TObject);
    procedure SPSpecChange(Sender: TObject);
    procedure FactoryNameChange(Sender: TObject);
    procedure cxTabControl1Change(Sender: TObject);
    procedure ToolButton1Click(Sender: TObject);
    procedure ToolButton2Click(Sender: TObject);
  private
    procedure SetStatus();
    procedure InitGrid();
    { Private declarations }
  public
    canshu1: string;
    { Public declarations }
  end;

//var
//  frmDJBRKList: TfrmDJBRKList;

implementation

uses
  U_DataLink, U_RTFun, U_Fun, U_DJBCKInPut, U_ZDYHelp, U_ZdyAttachGYS,
  U_SMHXList;

{$R *.dfm}

procedure TfrmDJBCKList.SetStatus();
begin
  TBAdd.Visible := False;
  TBDel.Visible := False;
  TBEdit.Visible := False;
  if Trim(canshu1) = '录入' then
  begin
    TBAdd.Visible := True;
  end;
  if Trim(canshu1) = '管理' then
  begin
    TBAdd.Visible := True;
    TBDel.Visible := True;
    TBEdit.Visible := True;
  end;
end;

procedure TfrmDJBCKList.FormClose(Sender: TObject; var Action: TCloseAction);
begin
  Action := caFree;
end;

procedure TfrmDJBCKList.FormCreate(Sender: TObject);
begin
  EndDate.DateTime := SGetServerDate10(ADOQueryTemp);
  BegDate.DateTime := EndDate.DateTime;
end;

procedure TfrmDJBCKList.InitGrid();
begin

  try
    ADOQueryMain.DisableControls;
    with ADOQueryMain do
    begin
      Close;
      sql.Clear;
      sql.add('select A.* from CK_SXPB_CR A   ');
      sql.add(' where A.CKName=''待检布'' and A.CRFlag=''出库'' and A.CRType in (''扫描回修出库'',''回修出库'',''调拨出库'',''改色出库'',''报废出库'') ');
      sql.add(' and A.CRTime>=' + quotedstr(trim(FormatDateTime('yyyy-MM-dd', BegDate.DateTime))));
      sql.add(' and A.CRTime<' + quotedstr(trim(FormatDateTime('yyyy-MM-dd', enddate.DateTime + 1))));
      Open;
    end;
    SCreateCDS20(ADOQueryMain, CDS_Main);
    SInitCDSData20(ADOQueryMain, CDS_Main);
  finally
    ADOQueryMain.EnableControls;
  end;
end;

procedure TfrmDJBCKList.TBRafreshClick(Sender: TObject);
begin
  BegDate.SetFocus;
  InitGrid();
end;

procedure TfrmDJBCKList.ConNoMChange(Sender: TObject);
begin
  if ADOQueryMain.Active then
  begin
    SDofilter(ADOQueryMain, SGetFilters(Panel1, 1, 2));
  end;
end;

procedure TfrmDJBCKList.TBCloseClick(Sender: TObject);
begin
  //WriteCxGrid(trim(self.Caption), Tv1, '开卡管理');
  if Trim(DName)='ADMIN' then
  begin
    WriteCxGridAll(trim(self.Caption), Tv1,ADOQueryCmd,ADOQueryTemp);
  end;
  Close;
end;

procedure TfrmDJBCKList.FormShow(Sender: TObject);
begin
  SetStatus();
  ReadCxGridAll(trim(self.Caption), Tv1);
  InitGrid();
end;

procedure TfrmDJBCKList.TBExportClick(Sender: TObject);
begin
  if ADOQueryMain.IsEmpty then
    exit;
  TcxGridToExcel('待检布入库列表', cxGrid2);
end;

procedure TfrmDJBCKList.TBFindClick(Sender: TObject);
begin
  if ADOQueryMain.Active then
  begin
    SDofilter(ADOQueryMain, SGetFilters(Panel1, 1, 2));
    SCreateCDS20(ADOQueryMain, CDS_Main);
    SInitCDSData20(ADOQueryMain, CDS_Main);
  end;
end;

procedure TfrmDJBCKList.N1Click(Sender: TObject);
begin
  SelOKNo(CDS_Main, True);
end;

procedure TfrmDJBCKList.N2Click(Sender: TObject);
begin
  SelOKNo(CDS_Main, False);
end;

procedure TfrmDJBCKList.TBDelClick(Sender: TObject);
begin
  if CDS_Main.IsEmpty then
    Exit;
  with ADOQueryTemp do
  begin
    Close;
    sql.Clear;
    sql.Add('select * from WFB_MJJY where APID=''' + Trim(CDS_Main.fieldbyname('SPID').AsString) + '''');
    Open;
  end;
  if ADOQueryTemp.IsEmpty = False then
  begin
    Application.MessageBox('已有打卷记录，不能删除!', '提示', 0);
    Exit;
  end;
  if Trim(CDS_Main.fieldbyname('SPID').AsString) <> '' then
  begin

    if Application.MessageBox('确定要删除数据吗？', '提示', 32 + 4) <> IDYES then
      Exit;
    try
      ADOQueryCmd.Connection.BeginTrans;

      with ADOQueryCmd do
      begin
        Close;
        sql.Clear;
        sql.Add(' delete CK_SXPB_CR where SPID=''' + Trim(CDS_Main.fieldbyname('SPID').AsString) + '''');
        ExecSQL;
      end;
      ADOQueryCmd.Connection.CommitTrans;
      CDS_Main.Delete;
    except
      ADOQueryCmd.Connection.RollbackTrans;
      Application.MessageBox('删除异常!', '提示', 0);
    end;

  end
  else
  begin
    CDS_Main.Delete;
  end;
end;

procedure TfrmDJBCKList.TBAddClick(Sender: TObject);
begin
  try
    frmDJBCKInPut := TfrmDJBCKInPut.Create(Application);
    with frmDJBCKInPut do
    begin
      FBCId := '';
      if ShowModal = 1 then
      begin
        Self.InitGrid();
      end;
    end;
  finally
    frmDJBCKInPut.Free;
  end;
end;

procedure TfrmDJBCKList.TBEditClick(Sender: TObject);
begin
  if CDS_Main.IsEmpty then
    Exit;

  try
    frmDJBCKInPut := TfrmDJBCKInPut.Create(Application);
    with frmDJBCKInPut do
    begin
      FBCId := Trim(CDS_Main.fieldbyname('SPID').AsString);
      TBDel.Visible := False;
      TBAdd.Visible := False;
      if ShowModal = 1 then
      begin
        Self.InitGrid();
      end;
    end;
  finally
    frmDJBCKInPut.Free;
  end;
end;

procedure TfrmDJBCKList.SPIDKeyPress(Sender: TObject; var Key: Char);
begin
  if Key = #13 then
  begin
    {if Length(Trim(SPID.Text))<4 then Exit;
    try
      ADOQueryMain.DisableControls;
      with ADOQueryMain do
      begin
        Filtered:=False;
        Close;
        sql.Clear;
        sql.Add(' select A.* ');
        sql.Add(',ConNo=(select ConNo from Contract_Main CM where CM.MainId=A.CGMainId)');
        //sql.Add(' ,ConNo=(select ConNo from Contract_Main CM where CM.MainId=A.CGMainId )');
        sql.Add(' from CK_SXPB_CR A');
        sql.add(' where SPID like :SXID');
        Parameters.ParamByName('SXID').Value:='%'+Trim(SXID.Text)+'%';
        Open;
        //ShowMessage(SQL.Text);
      end;
      SCreateCDS20(ADOQueryMain,CDS_Main);
      SInitCDSData20(ADOQueryMain,CDS_Main);
    finally
      ADOQueryMain.EnableControls;
    end; }
  end;
end;

procedure TfrmDJBCKList.SPIDChange(Sender: TObject);
begin
  if Length(Trim(SPID.Text)) < 4 then
  begin
    if Trim(SPID.Text) <> '' then
      Exit;
  end;
  TBFind.Click;
end;

procedure TfrmDJBCKList.SPSpecChange(Sender: TObject);
begin
  TBFind.Click;
end;

procedure TfrmDJBCKList.FactoryNameChange(Sender: TObject);
begin
  TBFind.Click;
end;

procedure TfrmDJBCKList.cxTabControl1Change(Sender: TObject);
begin
  InitGrid();
end;

procedure TfrmDJBCKList.ToolButton1Click(Sender: TObject);
var
  fPrintFile: string;
  Txt, fImagePath: string;
  Moudle: THandle;
  Makebar: TMakebar;
  Mixtext: TMixtext;
begin
  if CDS_Main.IsEmpty then
    Exit;

  ExportFtErpFile('待检验布出单.rmf', ADOQueryTemp);
  fPrintFile := ExtractFilePath(Application.ExeName) + 'Report\待检验布出单.rmf';

  if FileExists(fPrintFile) then
  begin
    RMVariables['QRBARCODE'] := fImagePath;
    RM1.LoadFromFile(fPrintFile);
    RM1.DefaultCopies := 1;
    RM1.ShowReport;
  end
  else
  begin
    Application.MessageBox(PChar('没有找' + fPrintFile), '提示', 0);
    Exit;
  end;

end;

procedure TfrmDJBCKList.ToolButton2Click(Sender: TObject);
begin
  try
    frmSMHXList := TfrmSMHXList.Create(Application);
    with frmSMHXList do
    begin

      if ShowModal = 1 then
      begin
        Self.InitGrid();
      end;
    end;
  finally
    frmSMHXList.Free;
  end;
end;

end.