unit U_JT1;

interface

uses
  Windows, Messages, SysUtils, Variants, Classes, Graphics, Controls, Forms,
  Dialogs, cxStyles, cxCustomData, cxGraphics, cxFilter, cxData, cxDataStorage,
  cxEdit, DB, cxDBData, ToolWin, ComCtrls, cxGridCustomTableView,
  cxGridTableView, cxGridDBTableView, cxGridLevel, cxClasses, cxControls,
  cxGridCustomView, cxGrid, DBClient, ADODB, ImgList, StdCtrls, ExtCtrls,
  cxTextEdit, cxGridCustomPopupMenu, cxGridPopupMenu, cxLookAndFeels,
  cxLookAndFeelPainters, cxNavigator, cxCheckBox, dxBarBuiltInMenu, cxPC;

type
  TfrmJT1 = class(TForm)
    TV1: TcxGridDBTableView;
    cxGrid1Level1: TcxGridLevel;
    cxGrid1: TcxGrid;
    V1Code: TcxGridDBColumn;
    V1Name: TcxGridDBColumn;
    ToolBar1: TToolBar;
    ADOQueryMain: TADOQuery;
    ADOQueryTemp: TADOQuery;
    ADOQueryCmd: TADOQuery;
    DataSource1: TDataSource;
    ClientDataSet1: TClientDataSet;
    TBAdd: TToolButton;
    TBSave: TToolButton;
    TBDel: TToolButton;
    TBClose: TToolButton;
    ToolButton1: TToolButton;
    TBEdit: TToolButton;
    V1Note: TcxGridDBColumn;
    V1OrderNo: TcxGridDBColumn;
    ADOConnection1: TADOConnection;
    Panel1: TPanel;
    Label1: TLabel;
    ZDYName: TEdit;
    ThreeImgList: TImageList;
    cxGridPopupMenu1: TcxGridPopupMenu;
    V1ZdyFlag: TcxGridDBColumn;
    V1HelpType: TcxGridDBColumn;
    V1note1: TcxGridDBColumn;
    TV1Column1: TcxGridDBColumn;
    cxTabControl1: TcxTabControl;
    ToolButton2: TToolButton;
    procedure FormCreate(Sender: TObject);
    procedure FormClose(Sender: TObject; var Action: TCloseAction);
    procedure TBAddClick(Sender: TObject);
    procedure TBSaveClick(Sender: TObject);
    procedure TBDelClick(Sender: TObject);
    procedure TBCloseClick(Sender: TObject);
    procedure FormShow(Sender: TObject);
    procedure ToolButton1Click(Sender: TObject);
    procedure TBEditClick(Sender: TObject);
    procedure TV1CellDblClick(Sender: TcxCustomGridTableView; ACellViewInfo: TcxGridTableDataCellViewInfo; AButton: TMouseButton; AShift: TShiftState; var AHandled: Boolean);
    procedure ZDYNameChange(Sender: TObject);
    procedure V1NamePropertiesEditValueChanged(Sender: TObject);
    procedure V1OrderNoPropertiesEditValueChanged(Sender: TObject);
    procedure V1NotePropertiesEditValueChanged(Sender: TObject);
    procedure V1Column1PropertiesEditValueChanged(Sender: TObject);
    procedure V1HelpTypePropertiesEditValueChanged(Sender: TObject);
    procedure V1note1PropertiesEditValueChanged(Sender: TObject);
    procedure cxTabControl1Change(Sender: TObject);
    procedure ToolButton2Click(Sender: TObject);
  private
    procedure InitGrid();
    procedure SetStatus();
    { Private declarations }
  public
    flag, flagname, snote, MainType: string;
    fnote, forderno, fZdyFlag, ViewFlag, fnote1, fHelpType, FZDYStr1: Boolean;
    PPSTE: integer;
    { Public declarations }
  end;

var
  frmJT1: TfrmJT1;

implementation

uses
  U_DataLink, U_Fun10, U_ZDYHelp;

{$R *.dfm}
procedure TfrmJT1.SetStatus();
begin
//  TV1Column1.Visible := false;
  ToolButton1.Visible := false;
  TBAdd.Visible := false;
  TBDel.Visible := false;
  TBEdit.Visible := false;
  ToolButton2.Visible := false;
  TBClose.Visible := false;
  case cxTabControl1.TabIndex of
    0:
      begin
//        TV1Column1.Visible := true;
        ToolButton1.Visible := true;
        TBAdd.Visible := true;
        TBDel.Visible := true;
        TBEdit.Visible := true;
        TBClose.Visible := true;
      end;
    1:
      begin
//        TV1Column1.Visible := false;
        ToolButton2.Visible := true;
        TBClose.Visible := true;
      end;
  end;
end;

procedure TfrmJT1.FormCreate(Sender: TObject);
begin
  try
    cxGrid1.Align := alClient;
    with ADOConnection1 do
    begin
      Connected := false;
      ConnectionString := DConString;
      //ConnectionString:='';
      Connected := true;
    end;
  except
    {if Application.MessageBox('网络连接失败,是否要再次连接?','提示',32+4)=IDYES then
    begin
      try
        with ADOConnection1 do
        begin
          Connected:=false;
          ConnectionString:=DConString;
          //ConnectionString:='23242';
          Connected:=true;
        end;
      except
      end;
    end; }

    frmJT1.Free;
  end;
end;

procedure TfrmJT1.FormClose(Sender: TObject; var Action: TCloseAction);
begin
  ZDYName.SetFocus;
  Action := caFree;
end;

procedure TfrmJT1.InitGrid();
begin
  try
    ADOQueryMain.DisableControls;
    with ADOQueryMain do
    begin
      Close;
      sql.Clear;
//      sql.Add('select A.*,ZJM=dbo.getPinYin(A.ZdyName) from KH_ZDY A where A.zdyzt=''0'' and A.Type=''' + flag + '''');
      sql.Add('select A.*,ZJM=dbo.getPinYin(A.ZdyName) from KH_ZDY A where  A.Type=''' + flag + '''');
      if Trim(MainType) <> '' then
      begin
        sql.Add(' and A.MainType=''' + Trim(MainType) + '''');
      end;
      if cxTabControl1.TabIndex = 0 then
      begin
        sql.Add(' and A.zdyzt=''0'' ');
      end
      else
      begin
        sql.Add(' and A.zdyzt=''1'' ');
      end;
      Open;
    end;
    SCreateCDS20(ADOQueryMain, ClientDataSet1);
    SInitCDSData20(ADOQueryMain, ClientDataSet1);
  finally
    ADOQueryMain.EnableControls;
  end;
end;

procedure TfrmJT1.TBAddClick(Sender: TObject);
var
  i: Integer;
begin
  ZDYName.SetFocus;
  TV1.OptionsData.Editing := True;
  TV1.OptionsSelection.CellSelect := True;
  for i := 0 to 5 do
  begin
    with ClientDataSet1 do
    begin
      Append;
      ClientDataSet1.FieldByName('ssel').AsBoolean := FALSE;
      Post;
    end;
  end;

end;

procedure TfrmJT1.TBSaveClick(Sender: TObject);
var
  maxno: string;
begin
  if ClientDataSet1.IsEmpty then
    Exit;
  ZDYName.SetFocus;

  if ClientDataSet1.Locate('ZDYName', null, []) then
  begin
    Application.MessageBox('名称不能为空！', '提示', 0);
    Exit;
  end;
  if ClientDataSet1.Locate('ZDYName', '', []) then
  begin
    Application.MessageBox('名称不能为空！', '提示', 0);
    Exit;
  end;
  try
    ADOQueryCmd.Connection.BeginTrans;
    with ADOQueryTemp do
    begin
      Close;
      SQL.Clear;
      SQL.Add('select * from KH_ZDY where ZdyNo=''' + Trim(flag) + '''');
      open;
    end;
    if ADOQueryTemp.IsEmpty then
    begin
      with ADOQueryCmd do
      begin
        close;
        sql.Clear;
        sql.Add('select * from KH_ZDY where 1=2');
        open;
        ADOQueryCmd.Append;
        ADOQueryCmd.FieldByName('ZDYNo').Value := Trim(flag);
        ADOQueryCmd.FieldByName('ZDYName').Value := trim(flagname);
        ADOQueryCmd.FieldByName('Type').Value := 'Main';
        ADOQueryCmd.FieldByName('MainType').Value := Trim(MainType);
        ADOQueryCmd.Post;
       { sql.Add('insert into KH_ZDY(ZDYNo,ZDYName,Type,MainType) select :ZDYNo,:ZDYName,:Type,:MainType ');
        Parameters.ParamByName('ZDYNo').Value:=Trim(flag);
        Parameters.ParamByName('ZDYName').Value:=Trim(flagname);
        Parameters.ParamByName('Type').Value:='Main';
        Parameters.ParamByName('MainType').Value:=Trim(MainType);
        ExecSQL;  }
      end;
    end;
    with ADOQueryCmd do
    begin
      ClientDataSet1.DisableControls;
      with ClientDataSet1 do
      begin
        First;
        while not eof do
        begin
          if Trim(ClientDataSet1.FieldByName('ZDYNO').AsString) = '' then
          begin
            if GetLSNo(ADOQueryTemp, maxno, 'SY', 'KH_ZDY', 3, 1) = False then
            begin
              ADOQueryCmd.Connection.RollbackTrans;
              ClientDataSet1.EnableControls;
              Application.MessageBox('取最大编号失败！', '提示', 0);
              Exit;
            end;
          end
          else
          begin
            maxno := Trim(ClientDataSet1.fieldbyname('ZDYNo').AsString);
          end;
          with ADOQueryTemp do
          begin
            Close;
            sql.Clear;
            sql.add('select * from KH_Zdy where Type=''' + Trim(flag) + '''');
            if Trim(MainType) <> '' then
              SQL.Add(' and MainType=''' + Trim(MainType) + '''');
            sql.Add(' and ZdyName=''' + Trim(ClientDataSet1.fieldbyname('ZdyName').AsString) + '''');
            Open;
          end;
          if ADOQueryTemp.IsEmpty = False then
          begin
            if ADOQueryTemp.RecordCount > 1 then
            begin
              ADOQueryCmd.Connection.RollbackTrans;
              ClientDataSet1.EnableControls;
              Application.MessageBox('名称重复！', '提示', 0);
              Exit;
            end;
            if Trim(ClientDataSet1.fieldbyname('ZdyNo').AsString) = '' then
            begin
              ADOQueryCmd.Connection.RollbackTrans;
              ClientDataSet1.EnableControls;
              Application.MessageBox('名称重复！', '提示', 0);
              Exit;
            end
            else
            begin
              if Trim(ADOQueryTemp.fieldbyname('ZdyNo').AsString) <> Trim(ClientDataSet1.fieldbyname('ZdyNo').AsString) then
              begin
                ADOQueryCmd.Connection.RollbackTrans;
                ClientDataSet1.EnableControls;
                Application.MessageBox('名称重复！', '提示', 0);
                Exit;
              end;
            end;
          end;
          with ADOQueryCmd do
          begin
            Close;
            sql.Clear;
            SQL.Add('delete KH_ZDY where ZDYNO=''' + Trim(ClientDataSet1.fieldbyname('ZDYNO').AsString) + '''');
            ExecSQL;
          end;
          with ADOQueryCmd do
          begin
            Close;
            sql.Clear;
            sql.Add('select * from KH_ZDY where 1<>1');
            Open;
          end;
          ADOQueryCmd.Append;
          ADOQueryCmd.FieldByName('ZDYNo').Value := Trim(maxno);
          ADOQueryCmd.FieldByName('ZDYName').Value := ClientDataSet1.fieldbyname('ZDYName').Value;
          ADOQueryCmd.FieldByName('note').Value := Trim(snote);
          //ADOQueryCmd.FieldByName('orderno').Value:=ClientDataSet1.fieldbyname('Name').AsString;
          ADOQueryCmd.FieldByName('Type').Value := flag;
          ADOQueryCmd.FieldByName('valid').Value := 'Y';
          if Trim(MainType) <> '' then
            ADOQueryCmd.FieldByName('MainType').Value := Trim(MainType);
          //ADOQueryCmd.FieldByName('sel').Value:=0;
          ADOQueryCmd.Post;
          ClientDataSet1.Edit;
          ClientDataSet1.FieldByName('ZDYNo').Value := Trim(maxno);
          ClientDataSet1.Post;
          Next;
        end;
      end;
      ClientDataSet1.EnableControls;
    end;
    ADOQueryCmd.Connection.CommitTrans;
    Application.MessageBox('保存成功！', '提示', 0);
//    TV1.OptionsData.Editing := False;
//    TV1.OptionsSelection.CellSelect := False;
//    TV1.OptionsData.Editing := true;
//    TV1.OptionsSelection.CellSelect := true;
  except
    ADOQueryCmd.Connection.RollbackTrans;
    Application.MessageBox('保存失败！', '提示', 0);
  end;

end;

procedure TfrmJT1.TBDelClick(Sender: TObject);
begin
  if ClientDataSet1.IsEmpty then
    Exit;
  if (Trim(ClientDataSet1.FieldByName('ZDYNo').AsString) <> '') or (Trim(ClientDataSet1.FieldByName('ZDYname').AsString) <> '') then
  begin
    if application.MessageBox('确定要删除吗?', '提示信息', 1) = 2 then
      exit;
    with ADOQueryCmd do
    begin
      Close;
      sql.Clear;
      sql.Add('delete KH_ZDY where ZDYNo=''' + Trim(ClientDataSet1.fieldbyname('ZDYNo').AsString) + '''');
      SQL.Add(' and Type=''' + Trim(flag) + '''');
      ExecSQL;
    end;
  end;
  ClientDataSet1.Delete;
end;

procedure TfrmJT1.TBCloseClick(Sender: TObject);
begin
  ModalResult := 2;
  ZDYName.SetFocus;
  WriteCxGrid('自定义' + Trim(flag), TV1, '自定义数据');
  Close;
end;

procedure TfrmJT1.FormShow(Sender: TObject);
var
  fsj, fsj1: string;
begin
  TV1.OptionsData.Editing := True;
  TV1.OptionsSelection.CellSelect := True;
  InitGrid();
  fsj := Trim(flag) + '01';
  fsj1 := Trim(flagname) + '01';
  ReadCxGrid('自定义' + Trim(flag), TV1, '自定义数据');
  frmJT1.Caption := Trim(flagname);
  V1Note.Visible := fnote;
  V1ZdyFlag.Visible := fZdyFlag;
  V1OrderNo.Visible := forderno;
  v1note1.Visible := fnote1;
  V1HelpType.Visible := fHelpType;
  if ViewFlag = True then
  begin
    TBAdd.Visible := False;
    TBSave.Visible := False;
    TBDel.Visible := False;
    TBEdit.Visible := False;
//    Label2.Visible := False;
  end;
end;

procedure TfrmJT1.ToolButton1Click(Sender: TObject);
begin
//  ZDYName.SetFocus;
// // WriteCxGrid('自定义'+Trim(flag),TV1,'自定义数据');
//  ModalResult := 1;


  if ClientDataSet1.IsEmpty then
    exit;
  ModalResult := 1;
end;

procedure TfrmJT1.TBEditClick(Sender: TObject);
begin
  TV1.OptionsData.Editing := True;
  TV1.OptionsSelection.CellSelect := True;
end;

procedure TfrmJT1.TV1CellDblClick(Sender: TcxCustomGridTableView; ACellViewInfo: TcxGridTableDataCellViewInfo; AButton: TMouseButton; AShift: TShiftState; var AHandled: Boolean);
begin
//  if TV1.OptionsData.Editing = False then
//  begin
//    ModalResult := 1;
//  end;
end;

procedure TfrmJT1.ZDYNameChange(Sender: TObject);
var
  fsj: string;
begin
  if Trim(ZDYName.Text) <> '' then
  begin
    fsj := ' zdyname like ''' + '%' + Trim(ZDYName.Text) + '%' + '''' + ' or Note like ''' + '%' + Trim(ZDYName.Text) + '%' + '''' + ' or ZJM like ''' + '%' + Trim(ZDYName.Text) + '%' + '''';
  end;
  if ADOQueryMain.Active then
  begin
    SDofilter(ADOQueryMain, fsj);
    SCreateCDS20(ADOQueryMain, ClientDataSet1);
    SInitCDSData20(ADOQueryMain, ClientDataSet1);
  end;
end;

procedure TfrmJT1.V1NamePropertiesEditValueChanged(Sender: TObject);
var
  maxno, mvalue: string;
begin
  mvalue := TcxTextEdit(Sender).EditingText;
  if Trim(mvalue) = '' then
  begin
    //Application.MessageBox('名称不能为空！','提示',0);
    Exit;
  end;
  with ClientDataSet1 do
  begin
    Edit;
    FieldByName('ZdyName').Value := Trim(mvalue);
    //Post;
  end;
  try
    ADOQueryCmd.Connection.BeginTrans;
    with ADOQueryTemp do
    begin
      Close;
      SQL.Clear;
      SQL.Add('select * from KH_ZDY where ZdyNo=''' + Trim(flag) + '''');
      open;
    end;
    if ADOQueryTemp.IsEmpty then
    begin
      with ADOQueryCmd do
      begin
        close;
        sql.Clear;
        sql.Add('select * from KH_ZDY where 1=2');
        open;
        ADOQueryCmd.Append;
        ADOQueryCmd.FieldByName('ZDYNo').Value := Trim(flag);
        ADOQueryCmd.FieldByName('ZDYName').Value := trim(flagname);
        ADOQueryCmd.FieldByName('Type').Value := 'Main';
        ADOQueryCmd.FieldByName('MainType').Value := Trim(MainType);
        ADOQueryCmd.Post;
      end;
    end;
    with ADOQueryCmd do
    begin
      //ClientDataSet1.DisableControls;
      //with ClientDataSet1 do
      //begin
        //First;
        //while not eof do
        //begin
      if Trim(ClientDataSet1.FieldByName('ZDYNO').AsString) = '' then
      begin
        if GetLSNo(ADOQueryTemp, maxno, 'SY', 'KH_ZDY', 3, 1) = False then
        begin
          ADOQueryCmd.Connection.RollbackTrans;
              //ClientDataSet1.EnableControls;
          Application.MessageBox('取最大编号失败！', '提示', 0);
          Exit;
        end;
      end
      else
      begin
        maxno := Trim(ClientDataSet1.fieldbyname('ZDYNo').AsString);
      end;
      with ADOQueryTemp do
      begin
        Close;
        sql.Clear;
        sql.add('select * from KH_Zdy where Type=''' + Trim(flag) + '''');
        if Trim(MainType) <> '' then
          SQL.Add(' and MainType=''' + Trim(MainType) + '''');
        sql.Add(' and ZdyName=''' + Trim(ClientDataSet1.fieldbyname('ZdyName').AsString) + '''');
        sql.Add(' and note=''' + Trim(ClientDataSet1.fieldbyname('note').AsString) + '''');
        Open;
      end;
      if ADOQueryTemp.IsEmpty = False then
      begin
        if ADOQueryTemp.RecordCount > 1 then
        begin
          ADOQueryCmd.Connection.RollbackTrans;
      
              //ClientDataSet1.EnableControls;
          Application.MessageBox('名称重复！', '提示', 0);
          Exit;
        end;
        if Trim(ClientDataSet1.fieldbyname('ZdyNo').AsString) = '' then
        begin
          ADOQueryCmd.Connection.RollbackTrans;
              //ClientDataSet1.EnableControls;
          Application.MessageBox('名称重复！', '提示', 0);
          Exit;
        end
        else
        begin
          if Trim(ADOQueryTemp.fieldbyname('ZdyNo').AsString) <> Trim(ClientDataSet1.fieldbyname('ZdyNo').AsString) then
          begin
            ADOQueryCmd.Connection.RollbackTrans;
                //ClientDataSet1.EnableControls;
            Application.MessageBox('名称重复！', '提示', 0);
            Exit;
          end;
        end;
      end;
      with ADOQueryCmd do
      begin
        Close;
        sql.Clear;
        SQL.Add('delete KH_ZDY where ZDYNO=''' + Trim(ClientDataSet1.fieldbyname('ZDYNO').AsString) + '''');
        ExecSQL;
      end;
      with ADOQueryCmd do
      begin
        Close;
        sql.Clear;
        sql.Add('select * from KH_ZDY where 1<>1');
        Open;
      end;
      ADOQueryCmd.Append;
      ADOQueryCmd.FieldByName('ZDYNo').Value := Trim(maxno);
      ADOQueryCmd.FieldByName('ZDYName').Value := ClientDataSet1.fieldbyname('ZDYName').AsString;
      ADOQueryCmd.FieldByName('note').Value := Trim(snote);
      ADOQueryCmd.FieldByName('zdyzt').Value := '0';
          //ADOQueryCmd.FieldByName('orderno').Value:=ClientDataSet1.fieldbyname('Name').AsString;
      ADOQueryCmd.FieldByName('Type').Value := flag;
      ADOQueryCmd.FieldByName('valid').Value := 'Y';
      if Trim(MainType) <> '' then
        ADOQueryCmd.FieldByName('MainType').Value := Trim(MainType);
          //ADOQueryCmd.FieldByName('sel').Value:=0;
      ADOQueryCmd.Post;
      ClientDataSet1.Edit;
      ClientDataSet1.FieldByName('ZDYNo').Value := Trim(maxno);
          //ClientDataSet1.Post;
         // Next;
        //end;
      //end;
     // ClientDataSet1.EnableControls;
    end;
    ADOQueryCmd.Connection.CommitTrans;
    //Application.MessageBox('保存成功！','提示',0);
    //TV1.OptionsData.Editing:=False;
    //TV1.OptionsSelection.CellSelect:=False;
  except
    ADOQueryCmd.Connection.RollbackTrans;
    Application.MessageBox('保存失败！', '提示', 0);
  end;
end;

procedure TfrmJT1.V1OrderNoPropertiesEditValueChanged(Sender: TObject);
var
  mvalue: string;
begin
  if Trim(ClientDataSet1.fieldbyname('ZdyName').AsString) = '' then
  begin
    Application.MessageBox('名称不能为空!', '提示', 0);
    Exit;
  end;
  mvalue := TcxTextEdit(Sender).EditingText;
  if Trim(mvalue) = '' then
  begin
    mvalue := '0';
  end;
  with ClientDataSet1 do
  begin
    Edit;
    FieldByName('OrderNo').Value := mvalue;
    Post;
  end;
  with ADOQueryCmd do
  begin
    Close;
    SQL.Clear;
    sql.Add('Update KH_Zdy Set OrderNo=' + mvalue);
    sql.Add(' where ZdyNo=''' + Trim(ClientDataSet1.fieldbyname('ZdyNo').AsString) + '''');
    ExecSQL;
  end;
end;

procedure TfrmJT1.V1NotePropertiesEditValueChanged(Sender: TObject);
var
  mvalue: string;
begin
  if Trim(ClientDataSet1.fieldbyname('ZdyName').AsString) = '' then
  begin
    Application.MessageBox('名称不能为空!', '提示', 0);
    Exit;
  end;
  mvalue := TcxTextEdit(Sender).EditingText;
  if Trim(mvalue) = '' then
  begin
    mvalue := '0';
  end;
  with ClientDataSet1 do
  begin
    Edit;
    FieldByName('Note').Value := mvalue;
    Post;
  end;
  with ADOQueryCmd do
  begin
    Close;
    SQL.Clear;
    sql.Add('Update KH_Zdy Set Note=''' + Trim(mvalue) + '''');
    sql.Add(' where ZdyNo=''' + Trim(ClientDataSet1.fieldbyname('ZdyNo').AsString) + '''');
    ExecSQL;
  end;
end;

procedure TfrmJT1.V1Column1PropertiesEditValueChanged(Sender: TObject);
var
  mvalue: string;
  fieldname: string;
begin
  fieldname := Tv1.Controller.FocusedColumn.DataBinding.FilterFieldName;
  if Trim(ClientDataSet1.fieldbyname('ZdyName').AsString) = '' then
  begin
    Application.MessageBox('名称不能为空!', '提示', 0);
    Exit;
  end;
  mvalue := TcxTextEdit(Sender).EditingText;
  if Trim(mvalue) = '' then
  begin
    mvalue := '0';
  end;
  with ClientDataSet1 do
  begin
    Edit;
    FieldByName(fieldname).Value := StrToInt(mvalue);
    Post;
  end;
  with ADOQueryCmd do
  begin
    Close;
    SQL.Clear;
    sql.Add('Update KH_Zdy Set ' + fieldname + '=' + Trim(mvalue));
    sql.Add(' where ZdyNo=''' + Trim(ClientDataSet1.fieldbyname('ZdyNo').AsString) + '''');
    ExecSQL;
  end;
end;

procedure TfrmJT1.V1HelpTypePropertiesEditValueChanged(Sender: TObject);
var
  mvalue: string;
begin
  if Trim(ClientDataSet1.fieldbyname('ZdyName').AsString) = '' then
  begin
    Application.MessageBox('名称不能为空!', '提示', 0);
    Exit;
  end;
  mvalue := TcxTextEdit(Sender).EditingText;
  if Trim(mvalue) = '' then
  begin
    mvalue := '0';
  end;
  with ClientDataSet1 do
  begin
    Edit;
    FieldByName('HelpType').Value := mvalue;
    Post;
  end;
  with ADOQueryCmd do
  begin
    Close;
    SQL.Clear;
    sql.Add('Update KH_Zdy Set HelpType=''' + Trim(mvalue) + '''');
    sql.Add(' where ZdyNo=''' + Trim(ClientDataSet1.fieldbyname('ZdyNo').AsString) + '''');
    ExecSQL;
  end;
end;

procedure TfrmJT1.V1note1PropertiesEditValueChanged(Sender: TObject);
var
  mvalue: string;
  fieldname: string;
begin
  fieldname := Tv1.Controller.FocusedColumn.DataBinding.FilterFieldName;
  if Trim(ClientDataSet1.fieldbyname('ZdyName').AsString) = '' then
  begin
    Application.MessageBox('名称不能为空!', '提示', 0);
    Exit;
  end;
  mvalue := TcxTextEdit(Sender).EditingText;

  with ClientDataSet1 do
  begin
    Edit;
    FieldByName(fieldname).Value := mvalue;
    Post;
  end;
  with ADOQueryCmd do
  begin
    Close;
    SQL.Clear;
    sql.Add('Update KH_Zdy Set ' + fieldname + '=' + quotedstr(Trim(mvalue)));
    sql.Add(' where ZdyNo=''' + Trim(ClientDataSet1.fieldbyname('ZdyNo').AsString) + '''');
    ExecSQL;
  end;
end;

procedure TfrmJT1.cxTabControl1Change(Sender: TObject);
begin
  SetStatus();
  InitGrid();
end;

procedure TfrmJT1.ToolButton2Click(Sender: TObject);
begin
  try
    ClientDataSet1.DisableControls;
    ADOQueryTemp.Connection.BeginTrans;
    with ClientDataSet1 do
    begin
      First;
      while not Eof do
      begin
        if ClientDataSet1.FieldByName('SSel').AsBoolean = True then
        begin
          with ADOQueryTemp do
          begin
            Close;
            sql.Clear;
            sql.Add('Update JYOrder_Sub Set ZT=''停用'' ');
            sql.Add('where JTH=''' + Trim(ClientDataSet1.fieldbyname('ZDYName').AsString) + '''');
            sql.Add('Update KH_ZDY Set ZDYZT=''0'' ');
            sql.Add('where ZDYName=''' + Trim(ClientDataSet1.fieldbyname('ZDYName').AsString) + '''');
            ExecSQL;
          end;
//          Edit;
//          FieldByName('ZT').Value := '启用';
//          Post;
        end;
        Next;
      end;
    end;
    ADOQueryTemp.Connection.CommitTrans;
    ClientDataSet1.EnableControls;
    application.MessageBox('数据保存成功！', '提示信息');
//    Panel9.Visible := false;
//    TBRafresh.Click;
  except
    ADOQueryTemp.Connection.RollbackTrans;
    ClientDataSet1.EnableControls;
    application.MessageBox('数据保存失败！', '提示信息', 0);
  end;
end;

end.