unit U_MGFYBBMXGL;

interface

uses
  Windows, Messages, SysUtils, Variants, Classes, Graphics, Controls, Forms,
  Dialogs, cxStyles, cxCustomData, cxGraphics, cxFilter, cxData, cxDataStorage,
  cxEdit, DB, cxDBData, cxGridCustomTableView, cxGridTableView,
  cxGridBandedTableView, cxGridDBBandedTableView, cxGridLevel, cxClasses,
  cxControls, cxGridCustomView, cxGridDBTableView, cxGrid, StdCtrls, ComCtrls,
  ExtCtrls, ToolWin, cxGridCustomPopupMenu, cxGridPopupMenu, ADODB, DBClient,
  cxDropDownEdit, cxCheckBox, RM_Common, RM_Class, RM_e_Xls, RM_Dataset,
  RM_System, RM_GridReport, Menus, cxCalendar, cxButtonEdit, cxTextEdit, cxPC,
  BtnEdit, cxSplitter, cxLookAndFeels, cxLookAndFeelPainters, cxNavigator,
  dxBarBuiltInMenu, MovePanel, cxCalc;

type
  TfrmMGFYBBMXGL = class(TForm)
    ToolBar1: TToolBar;
    TBRafresh: TToolButton;
    TBFind: TToolButton;
    TBClose: TToolButton;
    Panel1: TPanel;
    ADOQueryCmd: TADOQuery;
    ADOQueryMain: TADOQuery;
    ADOQueryTemp: TADOQuery;
    DataSource1: TDataSource;
    cxGridPopupMenu1: TcxGridPopupMenu;
    Label1: TLabel;
    BegDate: TDateTimePicker;
    EndDate: TDateTimePicker;
    CDS_Main: TClientDataSet;
    PopupMenu1: TPopupMenu;
    N1: TMenuItem;
    N2: TMenuItem;
    ClientDataSet1: TClientDataSet;
    cxGridPopupMenu2: TcxGridPopupMenu;
    DataSource2: TDataSource;
    ClientDataSet2: TClientDataSet;
    Label5: TLabel;
    G_ZBFACTORYNAME: TEdit;
    RMXLSExport1: TRMXLSExport;
    CDS_Print: TClientDataSet;
    RM1: TRMGridReport;
    RMDBDataSet1: TRMDBDataSet;
    ADOQueryPrint: TADOQuery;
    cxGrid2: TcxGrid;
    TV1: TcxGridDBTableView;
    cxGridDBColumn2: TcxGridDBColumn;
    cxGridDBColumn7: TcxGridDBColumn;
    cxGridDBColumn9: TcxGridDBColumn;
    Tv1Column1: TcxGridDBColumn;
    cxGridLevel1: TcxGridLevel;
    tv2Column1: TcxGridDBColumn;
    tv2Column2: TcxGridDBColumn;
    tv2Column6: TcxGridDBColumn;
    TV1Column11: TcxGridDBColumn;
    TV1Column12: TcxGridDBColumn;
    TV1Column15: TcxGridDBColumn;
    ToolButton1: TToolButton;
    TV1Column2: TcxGridDBColumn;
    TV1Column3: TcxGridDBColumn;
    TV1Column4: TcxGridDBColumn;
    TV1Column6: TcxGridDBColumn;
    TV1Column7: TcxGridDBColumn;
    TV1Column8: TcxGridDBColumn;
    TV1Column5: TcxGridDBColumn;
    TV1Column9: TcxGridDBColumn;
    TV1Column10: TcxGridDBColumn;
    TV1Column13: TcxGridDBColumn;
    TV1Column14: TcxGridDBColumn;
    chkMGF: TCheckBox;
    chKXKPF: TCheckBox;
    chkFXPWWC: TCheckBox;
    chkslt: TCheckBox;
    ToolBar2: TToolBar;
    ToolButton11: TToolButton;
    ToolButton12: TToolButton;
    ToolButton13: TToolButton;
    ToolButton14: TToolButton;
    ToolButton15: TToolButton;
    ToolButton16: TToolButton;
    ToolButton17: TToolButton;
    TV1Column16: TcxGridDBColumn;
    TV1Column17: TcxGridDBColumn;
    TV1Column18: TcxGridDBColumn;
    TV1Column19: TcxGridDBColumn;
    TV1Column20: TcxGridDBColumn;
    TV1Column21: TcxGridDBColumn;
    TV1Column22: TcxGridDBColumn;
    TV1Column23: TcxGridDBColumn;
    TV1Column24: TcxGridDBColumn;
    TV1Column25: TcxGridDBColumn;
    TV1Column26: TcxGridDBColumn;
    TV1Column27: TcxGridDBColumn;
    ToolBar3: TToolBar;
    ToolButton2: TToolButton;
    ToolButton3: TToolButton;
    ToolButton4: TToolButton;
    ToolButton5: TToolButton;
    ToolButton6: TToolButton;
    ToolButton7: TToolButton;
    ToolButton8: TToolButton;
    TV1Column28: TcxGridDBColumn;
    procedure FormDestroy(Sender: TObject);
    procedure FormClose(Sender: TObject; var Action: TCloseAction);
    procedure FormCreate(Sender: TObject);
    procedure TBRafreshClick(Sender: TObject);
    procedure ConNoMChange(Sender: TObject);
    procedure TBCloseClick(Sender: TObject);
    procedure FormShow(Sender: TObject);
    procedure TBExportClick(Sender: TObject);
    procedure TBFindClick(Sender: TObject);
    procedure N1Click(Sender: TObject);
    procedure N2Click(Sender: TObject);
    procedure FactoryNameChange(Sender: TObject);
    procedure cxTabControl1Change(Sender: TObject);
    procedure CRTypeChange(Sender: TObject);
    procedure Tv1CellClick(Sender: TcxCustomGridTableView; ACellViewInfo: TcxGridTableDataCellViewInfo; AButton: TMouseButton; AShift: TShiftState; var AHandled: Boolean);
    procedure G_ZBFACTORYNAMEKeyPress(Sender: TObject; var Key: Char);
    procedure KHNameKeyPress(Sender: TObject; var Key: Char);
    procedure TBBGZLClick(Sender: TObject);
    procedure TBHTClick(Sender: TObject);
    procedure TBFPClick(Sender: TObject);
    procedure TBZXDClick(Sender: TObject);
    procedure TBBGDClick(Sender: TObject);
    procedure TBSBYSClick(Sender: TObject);
    procedure TBAllClick(Sender: TObject);
    procedure YWYChange(Sender: TObject);
    procedure Tv1FocusedRecordChanged(Sender: TcxCustomGridTableView; APrevFocusedRecord, AFocusedRecord: TcxCustomGridRecord; ANewItemRecordFocusingChanged: Boolean);
    procedure huodaiBtnClick(Sender: TObject);
    procedure B7DaoHuoGangBtnClick(Sender: TObject);
    procedure BtnEditA1BtnClick(Sender: TObject);
    procedure ToolButton1Click(Sender: TObject);
    procedure chkMGFClick(Sender: TObject);
    procedure ToolButton11Click(Sender: TObject);
    procedure ToolButton12Click(Sender: TObject);
    procedure ToolButton13Click(Sender: TObject);
    procedure ToolButton14Click(Sender: TObject);
    procedure ToolButton15Click(Sender: TObject);
    procedure ToolButton16Click(Sender: TObject);
    procedure ToolButton17Click(Sender: TObject);
    procedure ToolButton2Click(Sender: TObject);
    procedure ToolButton3Click(Sender: TObject);
    procedure ToolButton4Click(Sender: TObject);
    procedure ToolButton5Click(Sender: TObject);
    procedure ToolButton6Click(Sender: TObject);
    procedure ToolButton7Click(Sender: TObject);
    procedure ToolButton8Click(Sender: TObject);
  private
    canshu2: string;
    FDate: TDateTime;
    procedure InitGrid();
    function DelData(): Boolean;
    procedure InitSubGrid();
    procedure InitGridSql(var fsj: string);
    procedure InitPrtData();
    { Private declarations }
  public
    canshu1: string;
    { Public declarations }
  end;

var
  frmMGFYBBMXGL: TfrmMGFYBBMXGL;

implementation

uses
  U_DataLink, U_RTFun, U_ZDYHelp, U_Fun;

{$R *.dfm}

procedure TfrmMGFYBBMXGL.FormDestroy(Sender: TObject);
begin
  //frmBaoGuanList:=nil;
end;

procedure TfrmMGFYBBMXGL.FormClose(Sender: TObject; var Action: TCloseAction);
begin
  Application := MainApplication;
  Action := caFree;
end;

procedure TfrmMGFYBBMXGL.FormCreate(Sender: TObject);
begin
  //cxGrid1.Align:=alClient;
  EndDate.DateTime := SGetServerDate10(ADOQueryTemp);
  BegDate.DateTime := SGetServerDateMBeg(ADOQueryTemp);
  canshu1 := Trim(DParameters1);
  canshu2 := Trim(DParameters2);
end;

procedure TfrmMGFYBBMXGL.InitGrid();
begin
  try
    ADOQueryMain.DisableControls;
    with ADOQueryMain do
    begin
      Filtered := False;
      Close;
      sql.Clear;

      SQL.Add('SELECT *  ');
      SQL.Add(',YF_MGF1=CAST( YF_MGF AS BIT)');
      SQL.Add(',YF_DYF1=CAST( YF_DYF AS BIT)');
      SQL.Add(',YF_XPKPF1=CAST( YF_XPKPF AS BIT)');
      SQL.Add(',YF_DPKPF1=CAST( YF_DPKPF AS BIT)');
      SQL.Add(',YF_DWZPF1=CAST( YF_DWZPF AS BIT)');
      SQL.Add(',YF_MGQTF1=CAST( YF_MGQTF AS BIT)');
      SQL.Add(',YF_DYQTF1=CAST( YF_DYQTF AS BIT)');
      SQL.Add(',ismg=(case when G_YMG=1 then ''已描稿'' else ''未描稿'' end)');
      SQL.Add(',DPKPS=(SELECT COUNT(*) FROM Sketch_XMAP B WHERE A.MGID=B.MGID AND B.XMNAME=''大片'' and b.xmkp=1)');
      SQL.Add(',XPKPS=(SELECT COUNT(*) FROM Sketch_XMAP B WHERE A.MGID=B.MGID AND B.XMNAME=''小片'' and b.xmkp=1)');
      SQL.Add(',isjg=(case when G_NG=1 then ''非简稿'' else ''简稿'' end)');
      SQL.Add(',ISYP=(case when G_yyp=1 then ''有'' else ''无'' end)');
      sql.Add('FROM Sketch_main A');
      sql.Add('where A.G_ZBDATE>=''' + formatdateTime('yyyy-MM-dd', begdate.Date) + ''' ');
      sql.Add('and A.G_ZBDATE<''' + formatdateTime('yyyy-MM-dd', enddate.Date + 1) + ''' ');
      if chkMGF.Checked then
      begin
        SQL.Add('AND YF_MGF=0');
      end;
      if chKXKPF.Checked then
      begin
        SQL.Add('AND YF_XPKPF=0');
      end;
      if chkFXPWWC.Checked then
      begin
        SQL.Add('AND YF_DPKPF=0');
      end;
      if chkslt.Checked then
      begin
        SQL.Add('AND YF_MGQTF=0');
      end;

      Open;
    end;
    SCreateCDS20(ADOQueryMain, CDS_Main);
    SInitCDSData20(ADOQueryMain, CDS_Main);
  finally
    ADOQueryMain.EnableControls;
  end;
end;

procedure TfrmMGFYBBMXGL.TBRafreshClick(Sender: TObject);
begin
  ToolBar1.SetFocus;
  InitGrid();
end;

procedure TfrmMGFYBBMXGL.ConNoMChange(Sender: TObject);
begin
  if ADOQueryMain.Active then
  begin
    SDofilter(ADOQueryMain, SGetFilters(Panel1, 1, 2));
  end;
end;

procedure TfrmMGFYBBMXGL.TBCloseClick(Sender: TObject);
begin
  WriteCxGrid('报关主表' + self.Caption, Tv1, '描稿费用明细报表');
//  WriteCxGrid('报关明细' + self.Caption, Tv2, '报关管理8');
  Close;
end;

procedure TfrmMGFYBBMXGL.FormShow(Sender: TObject);
begin
  ReadCxGrid('报关主表' + self.Caption, Tv1, '描稿费用明细报表');
//  ReadCxGrid('报关明细' + self.Caption, Tv2, '报关管理8');
  canshu1 := Trim(DParameters1);
//  ShowMessage(canshu1);

  InitGrid();
  TBFind.Click();
  RM1.CanExport := true;
end;

procedure TfrmMGFYBBMXGL.TBExportClick(Sender: TObject);
begin
  if ADOQueryMain.IsEmpty then
    exit;
//  TcxGridToExcel(Trim(CDS_Main.fieldbyname('A4FPNO').AsString) + Trim(CDS_Main.fieldbyname('A5ConNO').AsString), cxGrid1);
end;

procedure TfrmMGFYBBMXGL.TBFindClick(Sender: TObject);
begin
  if ADOQueryMain.Active then
  begin
    SDofilter(ADOQueryMain, SGetFilters(Panel1, 1, 2));
    SCreateCDS20(ADOQueryMain, CDS_Main);
    SInitCDSData20(ADOQueryMain, CDS_Main);
  end;
end;

procedure TfrmMGFYBBMXGL.N1Click(Sender: TObject);
begin
  SelOKNo(CDS_Main, True);
end;

procedure TfrmMGFYBBMXGL.N2Click(Sender: TObject);
begin
  SelOKNo(CDS_Main, False);
end;

procedure TfrmMGFYBBMXGL.InitSubGrid();
begin
  if CDS_Main.IsEmpty = False then
  begin
    with ADOQueryTemp do
    begin
      Close;
      sql.Clear;
      sql.Add('select * from JYOrder_BaoGuan_Sub where BGID=''' + Trim(CDS_Main.fieldbyname('BGID').AsString) + '''');
      sql.Add(' and SValid=''Y'' ');
      Open;
    end;
  end
  else
  begin
    with ADOQueryTemp do
    begin
      Close;
      sql.Clear;
      sql.Add('select * from JYOrder_BaoGuan_Sub where 1=2');
      Open;
    end;
  end;

  SCreateCDS20(ADOQueryTemp, ClientDataSet2);
  SInitCDSData20(ADOQueryTemp, ClientDataSet2);
end;

function TfrmMGFYBBMXGL.DelData(): Boolean;
begin
  try
    Result := false;
    ADOQueryCmd.Connection.BeginTrans;
    CDS_Main.DisableControls;
    with CDS_Main do
    begin
      First;
      while CDS_Main.Locate('SSel', True, []) do
      begin
        with ADOQueryCmd do
        begin
          Close;
          sql.Clear;
          sql.Add('UPdate JYOrder_BaoGuan_Main Set Valid=''N'',C7BGMoneyHZ=Null,E1BZQtyHZ=Null, E2ChiMaQtyHZ=Null,E3MaoZHZ=Null,E4JingZHZ=Null');
          sql.Add(',Editer=''' + Trim(DName) + ''',EditTime=getdate()');
          sql.Add(' where BGId=''' + Trim(CDS_Main.fieldbyname('BGId').AsString) + '''');
          sql.Add('UPdate JYOrder_BaoGuan_Sub Set SValid=''N'',SEditer=''' + Trim(DName) + ''',SEditTime=getdate()  where BGId=''' + Trim(CDS_Main.fieldbyname('BGId').AsString) + '''');
          ExecSQL;
        end;
        CDS_Main.Delete;
      end;
    end;
    CDS_Main.EnableControls;
    ADOQueryCmd.Connection.CommitTrans;
    Result := True;
  except
    CDS_Main.EnableControls;
    ADOQueryCmd.Connection.RollbackTrans;
    Result := False;
    Application.MessageBox('数据删除异常！', '提示', 0);
  end;
end;

procedure TfrmMGFYBBMXGL.FactoryNameChange(Sender: TObject);
begin
  TBFind.Click;
end;

procedure TfrmMGFYBBMXGL.cxTabControl1Change(Sender: TObject);
begin

  InitGrid();
end;

procedure TfrmMGFYBBMXGL.CRTypeChange(Sender: TObject);
begin
  TBFind.Click;
end;

procedure TfrmMGFYBBMXGL.InitGridSql(var fsj: string);
begin
  try
    ADOQueryMain.DisableControls;
    with ADOQueryMain do
    begin
      Filtered := False;
      Close;
      sql.Clear;
      sql.Add('select A.* ');
      sql.Add(' from JYOrder_BaoGuan_Main A  ');
      sql.Add(' where 1=1 ');
      if Trim(canshu1) <> '高权限' then
      begin
        SQL.Add(' and FillerCode=''' + Trim(DCode) + '''');
      end;

      sql.Add(fsj);
      Open;
    end;
    SCreateCDS20(ADOQueryMain, CDS_Main);
    SInitCDSData20(ADOQueryMain, CDS_Main);
  finally
    ADOQueryMain.EnableControls;
  end;
end;

procedure TfrmMGFYBBMXGL.Tv1CellClick(Sender: TcxCustomGridTableView; ACellViewInfo: TcxGridTableDataCellViewInfo; AButton: TMouseButton; AShift: TShiftState; var AHandled: Boolean);
begin
  InitSubGrid();
end;

procedure TfrmMGFYBBMXGL.G_ZBFACTORYNAMEKeyPress(Sender: TObject; var Key: Char);
var
  fsj: string;
begin
//  if Key = #13 then
//  begin
//    if Trim(A6PONO.Text) = '' then
//      Exit;
//    fsj := ' and isnull(A.A6PONO,'''') like ''' + '%' + Trim(A6PONO.Text) + '%' + '''';
//    InitGridSql(fsj);
//  end;
end;

procedure TfrmMGFYBBMXGL.KHNameKeyPress(Sender: TObject; var Key: Char);
var
  fsj: string;
begin
//  if Key = #13 then
//  begin
//    if Trim(A5ConNO.Text) = '' then
//      Exit;
//    fsj := ' and isnull(A.A5ConNO,'''') like ''' + '%' + Trim(A5ConNO.Text) + '%' + '''';
//    InitGridSql(fsj);
//  end;
end;

procedure TfrmMGFYBBMXGL.InitPrtData();
begin
  with ADOQueryPrint do
  begin
    Close;
    sql.Clear;
    sql.Add(' exec P_View_BaoGuanData :BGID ');
    Parameters.ParamByName('BGID').Value := Trim(CDS_Main.fieldbyname('BGId').AsString);
    Open;
  end;
  SCreateCDS20(ADOQueryPrint, CDS_Print);
  SInitCDSData20(ADOQueryPrint, CDS_Print);
end;

procedure TfrmMGFYBBMXGL.TBBGZLClick(Sender: TObject);
var
  fPrintFile: string;
  EngMoney, BZZH, FimageFile: string;
begin
  if CDS_Main.IsEmpty then
    Exit;
  fPrintFile := ExtractFilePath(Application.ExeName) + 'Report\报关资料.rmf';
  InitPrtData();
  FimageFile := ExtractFilePath(Application.ExeName) + 'Image\' + Trim(CDS_Print.FieldByName('A1ChuKouShang').AsString) + '.jpg';
  RMXLSExport1 := TRMXLSExport.Create(RMXLSExport1);
  if FileExists(fPrintFile) then
  begin
    //RMVariables['enddate']:=enddate.DateTime;
    //RMVariables['printtime']:=Now;
    RMVariables['ImageFile'] := trim(FimageFile);
    RM1.LoadFromFile(fPrintFile);
    RM1.ShowReport;
  end
  else
  begin
    Application.MessageBox(PChar('没有找' + ExtractFilePath(Application.ExeName) + 'Report\报关资料.rmf'), '提示', 0);
  end;
end;

procedure TfrmMGFYBBMXGL.TBHTClick(Sender: TObject);
var
  fPrintFile: string;
  EngMoney, BZZH, FimageFile: string;
begin
  if CDS_Main.IsEmpty then
    Exit;
  fPrintFile := ExtractFilePath(Application.ExeName) + 'Report\报关合同.rmf';
  InitPrtData();
  FimageFile := ExtractFilePath(Application.ExeName) + 'Image\' + Trim(CDS_Print.FieldByName('A1ChuKouShang').AsString) + '.jpg';
  RMXLSExport1 := TRMXLSExport.Create(RMXLSExport1);
  if FileExists(fPrintFile) then
  begin
    //RMVariables['enddate']:=enddate.DateTime;
    //RMVariables['printtime']:=Now;
    RMVariables['ImageFile'] := trim(FimageFile);
    RM1.LoadFromFile(fPrintFile);
    RM1.ShowReport;
  end
  else
  begin
    Application.MessageBox(PChar('没有找' + ExtractFilePath(Application.ExeName) + 'Report\报关合同.rmf'), '提示', 0);
  end;
end;

procedure TfrmMGFYBBMXGL.TBFPClick(Sender: TObject);
var
  fPrintFile: string;
  EngMoney, BZZH, FimageFile: string;
begin
  if CDS_Main.IsEmpty then
    Exit;
  fPrintFile := ExtractFilePath(Application.ExeName) + 'Report\报关发票.rmf';
  InitPrtData();
  FimageFile := ExtractFilePath(Application.ExeName) + 'Image\' + Trim(CDS_Print.FieldByName('A1ChuKouShang').AsString) + '.jpg';
  RMXLSExport1 := TRMXLSExport.Create(RMXLSExport1);
  if FileExists(fPrintFile) then
  begin
    //RMVariables['enddate']:=enddate.DateTime;
    //RMVariables['printtime']:=Now;
    RMVariables['ImageFile'] := trim(FimageFile);
    RM1.LoadFromFile(fPrintFile);
    RM1.ShowReport;
  end
  else
  begin
    Application.MessageBox(PChar('没有找' + ExtractFilePath(Application.ExeName) + 'Report\报关发票.rmf'), '提示', 0);
  end;
end;

procedure TfrmMGFYBBMXGL.TBZXDClick(Sender: TObject);
var
  fPrintFile: string;
  EngMoney, BZZH, FimageFile: string;
begin
  if CDS_Main.IsEmpty then
    Exit;
  fPrintFile := ExtractFilePath(Application.ExeName) + 'Report\报关装箱单.rmf';
  InitPrtData();
  FimageFile := ExtractFilePath(Application.ExeName) + 'Image\' + Trim(CDS_Print.FieldByName('A1ChuKouShang').AsString) + '.jpg';
  RMXLSExport1 := TRMXLSExport.Create(RMXLSExport1);
  if FileExists(fPrintFile) then
  begin
    //RMVariables['enddate']:=enddate.DateTime;
    //RMVariables['printtime']:=Now;
    RMVariables['ImageFile'] := trim(FimageFile);
    RM1.LoadFromFile(fPrintFile);
    RM1.ShowReport;
  end
  else
  begin
    Application.MessageBox(PChar('没有找' + ExtractFilePath(Application.ExeName) + 'Report\报关装箱单.rmf'), '提示', 0);
  end;
end;

procedure TfrmMGFYBBMXGL.TBBGDClick(Sender: TObject);
var
  fPrintFile: string;
  EngMoney, BZZH, FimageFile: string;
begin
  if CDS_Main.IsEmpty then
    Exit;
  fPrintFile := ExtractFilePath(Application.ExeName) + 'Report\报关单.rmf';
  InitPrtData();
  FimageFile := ExtractFilePath(Application.ExeName) + 'Image\' + Trim(CDS_Print.FieldByName('A1ChuKouShang').AsString) + '.jpg';
  RMXLSExport1 := TRMXLSExport.Create(RMXLSExport1);
  if FileExists(fPrintFile) then
  begin
    //RMVariables['enddate']:=enddate.DateTime;
    //RMVariables['printtime']:=Now;
    RMVariables['ImageFile'] := trim(FimageFile);
    RM1.LoadFromFile(fPrintFile);
    RM1.ShowReport;
  end
  else
  begin
    Application.MessageBox(PChar('没有找' + ExtractFilePath(Application.ExeName) + 'Report\报关单.rmf'), '提示', 0);
  end;
end;

procedure TfrmMGFYBBMXGL.TBSBYSClick(Sender: TObject);
var
  fPrintFile: string;
  EngMoney, BZZH, FimageFile: string;
begin
  if CDS_Main.IsEmpty then
    Exit;
  fPrintFile := ExtractFilePath(Application.ExeName) + 'Report\申报要素.rmf';
  InitPrtData();
  FimageFile := ExtractFilePath(Application.ExeName) + 'Image\' + Trim(CDS_Print.FieldByName('A1ChuKouShang').AsString) + '.jpg';
  RMXLSExport1 := TRMXLSExport.Create(RMXLSExport1);
  if FileExists(fPrintFile) then
  begin
    //RMVariables['enddate']:=enddate.DateTime;
    //RMVariables['printtime']:=Now;
    RMVariables['ImageFile'] := trim(FimageFile);
    RM1.LoadFromFile(fPrintFile);
    RM1.ShowReport;
  end
  else
  begin
    Application.MessageBox(PChar('没有找' + ExtractFilePath(Application.ExeName) + 'Report\申报要素.rmf'), '提示', 0);
  end;
end;

procedure TfrmMGFYBBMXGL.TBAllClick(Sender: TObject);
var
  fPrintFile: string;
  EngMoney, BZZH, FimageFile, FZMFile: string;
begin
  if CDS_Main.IsEmpty then
    Exit;
  fPrintFile := ExtractFilePath(Application.ExeName) + 'Report\全部报关资料.rmf';
  InitPrtData();
  FimageFile := ExtractFilePath(Application.ExeName) + 'Image\' + Trim(CDS_Print.FieldByName('A1ChuKouShang').AsString) + '.jpg';
  //RMXLSExport1:= TRMXLSExport.Create(RMXLSExport1);
  if FileExists(fPrintFile) then
  begin
    if RM1.CanExport = true then
    begin
      FZMFile := 'C:\Users\Administrator\Desktop';
      if not DirectoryExists(FZMFile) then
      begin
        FZMFile := 'C:\Documents and Settings\Administrator\桌面\' + trim(CDS_Main.fieldbyname('A4FPNO').AsString) + ' ' + trim(CDS_Main.fieldbyname('A5ConNO').AsString) + '.xls';
      end
      else
      begin
        FZMFile := 'C:\Users\Administrator\Desktop\' + trim(CDS_Main.fieldbyname('A4FPNO').AsString) + ' ' + trim(CDS_Main.fieldbyname('A5ConNO').AsString) + '.XLS';
      end;
      RM1.ExportTo(RMXLSExport1, FZMFile);
    end;
    RM1.CanExport := true;
    RMVariables['ImageFile'] := trim(FimageFile);
    RM1.LoadFromFile(fPrintFile);
    RM1.ShowReport;
    RM1.CanExport := False;
  end
  else
  begin
    Application.MessageBox(PChar('没有找' + ExtractFilePath(Application.ExeName) + 'Report\全部报关资料.rmf'), '提示', 0);
  end;
end;

procedure TfrmMGFYBBMXGL.YWYChange(Sender: TObject);
begin
  SDofilter(ADOQueryTemp, SGetFilters(Panel1, 3, 1));
  SCreateCDS20(ADOQueryTemp, ClientDataSet2);
  SInitCDSData20(ADOQueryTemp, ClientDataSet2);
end;

procedure TfrmMGFYBBMXGL.Tv1FocusedRecordChanged(Sender: TcxCustomGridTableView; APrevFocusedRecord, AFocusedRecord: TcxCustomGridRecord; ANewItemRecordFocusingChanged: Boolean);
begin
  InitSubGrid();
end;

procedure TfrmMGFYBBMXGL.huodaiBtnClick(Sender: TObject);
var
  fsj: string;
  FWZ: Integer;
begin
  fsj := Trim(TEdit(Sender).Hint);
  FWZ := Pos('/', fsj);
  try
    frmZDYHelp := TfrmZDYHelp.Create(Application);
    with frmZDYHelp do
    begin
      flag := Copy(fsj, 1, FWZ - 1);
      flagname := Copy(fsj, FWZ + 1, Length(fsj) - FWZ);
      if ShowModal = 1 then
      begin
        TEdit(Sender).Text := Trim(ClientDataSet1.fieldbyname('ZDYName').AsString);
      end;
    end;
  finally
    frmZDYHelp.Free;
  end;
end;

procedure TfrmMGFYBBMXGL.B7DaoHuoGangBtnClick(Sender: TObject);
var
  fsj: string;
  FWZ: Integer;
begin
  fsj := Trim(TEdit(Sender).Hint);
  FWZ := Pos('/', fsj);
  try
    frmZDYHelp := TfrmZDYHelp.Create(Application);
    with frmZDYHelp do
    begin
      flag := Copy(fsj, 1, FWZ - 1);
      flagname := Copy(fsj, FWZ + 1, Length(fsj) - FWZ);
      if ShowModal = 1 then
      begin
        TEdit(Sender).Text := Trim(ClientDataSet1.fieldbyname('ZDYName').AsString);
      end;
    end;
  finally
    frmZDYHelp.Free;
  end;
end;

procedure TfrmMGFYBBMXGL.BtnEditA1BtnClick(Sender: TObject);
var
  fsj: string;
  FWZ: Integer;
begin
  fsj := Trim(TEdit(Sender).Hint);
  FWZ := Pos('/', fsj);
  try
    frmZDYHelp := TfrmZDYHelp.Create(Application);
    with frmZDYHelp do
    begin
      flag := Copy(fsj, 1, FWZ - 1);
      flagname := Copy(fsj, FWZ + 1, Length(fsj) - FWZ);
      if ShowModal = 1 then
      begin
        TEdit(Sender).Text := Trim(ClientDataSet1.fieldbyname('ZDYName').AsString);
      end;
    end;
  finally
    frmZDYHelp.Free;
  end;

end;

procedure TfrmMGFYBBMXGL.ToolButton1Click(Sender: TObject);
begin
  if ADOQueryMain.IsEmpty then
    exit;
//  SelExportData(Tv1, ADOQueryMain, '出货清单');

  TcxGridToExcel(self.Caption, cxGrid2);
end;

procedure TfrmMGFYBBMXGL.chkMGFClick(Sender: TObject);
begin
  InitGrid();

end;

procedure TfrmMGFYBBMXGL.ToolButton11Click(Sender: TObject);
begin
  if CDS_Main.IsEmpty then
    exit;

  if CDS_Main.Locate('ssel', true, []) = false then
  begin
    Application.MessageBox('没有选择数据!', '提示', 0);
    Exit;
  end;
  try
    ADOQueryCmd.Connection.BeginTrans;
    with CDS_Main do
    begin
      DisableControls;
      First;
      while not eof do
      begin
        if Fieldbyname('ssel').AsBoolean then
        begin
          with ADOQueryCmd do
          begin
            close;
            sql.Clear;
            sql.Add('update Sketch_Main SET YF_MGF=''1'' ');
            sql.Add('where MGID =' + quotedstr(trim(CDS_Main.fieldbyname('MGID').AsString)));
            execsql;
          end;
          edit;
          CDS_Main.fieldbyname('YF_MGF1').Value := True;
        end;
        next;
      end;
      First;
      EnableControls;
    end;
    ADOQueryCmd.Connection.CommitTrans;
    application.MessageBox('操作成功！', '提示信息', 0);
  except
    ADOQueryCmd.Connection.RollbackTrans;
    application.MessageBox('操作失败！', '提示信息', 0);
  end;
end;

procedure TfrmMGFYBBMXGL.ToolButton12Click(Sender: TObject);
begin
  if CDS_Main.IsEmpty then
    exit;

  if CDS_Main.Locate('ssel', true, []) = false then
  begin
    Application.MessageBox('没有选择数据!', '提示', 0);
    Exit;
  end;
  try
    ADOQueryCmd.Connection.BeginTrans;
    with CDS_Main do
    begin
      DisableControls;
      First;
      while not eof do
      begin
        if Fieldbyname('ssel').AsBoolean then
        begin
          with ADOQueryCmd do
          begin
            close;
            sql.Clear;
            sql.Add('update Sketch_Main SET YF_XPKPF=''1'' ');
            sql.Add('where MGID =' + quotedstr(trim(CDS_Main.fieldbyname('MGID').AsString)));
            execsql;
          end;
          edit;
          CDS_Main.fieldbyname('YF_XPKPF1').Value := True;
        end;
        next;
      end;
      First;
      EnableControls;
    end;
    ADOQueryCmd.Connection.CommitTrans;
    application.MessageBox('操作成功！', '提示信息', 0);
  except
    ADOQueryCmd.Connection.RollbackTrans;
    application.MessageBox('操作失败！', '提示信息', 0);
  end;
end;

procedure TfrmMGFYBBMXGL.ToolButton13Click(Sender: TObject);
begin
  if CDS_Main.IsEmpty then
    exit;

  if CDS_Main.Locate('ssel', true, []) = false then
  begin
    Application.MessageBox('没有选择数据!', '提示', 0);
    Exit;
  end;
  try
    ADOQueryCmd.Connection.BeginTrans;
    with CDS_Main do
    begin
      DisableControls;
      First;
      while not eof do
      begin
        if Fieldbyname('ssel').AsBoolean then
        begin
          with ADOQueryCmd do
          begin
            close;
            sql.Clear;
            sql.Add('update Sketch_Main SET YF_DYF=''1'' ');
            sql.Add('where MGID =' + quotedstr(trim(CDS_Main.fieldbyname('MGID').AsString)));
            execsql;
          end;
          edit;
          CDS_Main.fieldbyname('YF_DYF1').Value := True;
        end;
        next;
      end;
      First;
      EnableControls;
    end;
    ADOQueryCmd.Connection.CommitTrans;
    application.MessageBox('操作成功！', '提示信息', 0);
  except
    ADOQueryCmd.Connection.RollbackTrans;
    application.MessageBox('操作失败！', '提示信息', 0);
  end;
end;

procedure TfrmMGFYBBMXGL.ToolButton14Click(Sender: TObject);
begin
  if CDS_Main.IsEmpty then
    exit;

  if CDS_Main.Locate('ssel', true, []) = false then
  begin
    Application.MessageBox('没有选择数据!', '提示', 0);
    Exit;
  end;
  try
    ADOQueryCmd.Connection.BeginTrans;
    with CDS_Main do
    begin
      DisableControls;
      First;
      while not eof do
      begin
        if Fieldbyname('ssel').AsBoolean then
        begin
          with ADOQueryCmd do
          begin
            close;
            sql.Clear;
            sql.Add('update Sketch_Main SET YF_DPKPF=''1'' ');
            sql.Add('where MGID =' + quotedstr(trim(CDS_Main.fieldbyname('MGID').AsString)));
            execsql;
          end;
          edit;
          CDS_Main.fieldbyname('YF_DPKPF1').Value := True;
        end;
        next;
      end;
      First;
      EnableControls;
    end;
    ADOQueryCmd.Connection.CommitTrans;
    application.MessageBox('操作成功！', '提示信息', 0);
  except
    ADOQueryCmd.Connection.RollbackTrans;
    application.MessageBox('操作失败！', '提示信息', 0);
  end;
end;

procedure TfrmMGFYBBMXGL.ToolButton15Click(Sender: TObject);
begin
  if CDS_Main.IsEmpty then
    exit;

  if CDS_Main.Locate('ssel', true, []) = false then
  begin
    Application.MessageBox('没有选择数据!', '提示', 0);
    Exit;
  end;
  try
    ADOQueryCmd.Connection.BeginTrans;
    with CDS_Main do
    begin
      DisableControls;
      First;
      while not eof do
      begin
        if Fieldbyname('ssel').AsBoolean then
        begin
          with ADOQueryCmd do
          begin
            close;
            sql.Clear;
            sql.Add('update Sketch_Main SET YF_DWZPF=''1'' ');
            sql.Add('where MGID =' + quotedstr(trim(CDS_Main.fieldbyname('MGID').AsString)));
            execsql;
          end;
          edit;
          CDS_Main.fieldbyname('YF_DWZPF1').Value := True;
        end;
        next;
      end;
      First;
      EnableControls;
    end;
    ADOQueryCmd.Connection.CommitTrans;
    application.MessageBox('操作成功！', '提示信息', 0);
  except
    ADOQueryCmd.Connection.RollbackTrans;
    application.MessageBox('操作失败！', '提示信息', 0);
  end;
end;

procedure TfrmMGFYBBMXGL.ToolButton16Click(Sender: TObject);
begin
  if CDS_Main.IsEmpty then
    exit;

  if CDS_Main.Locate('ssel', true, []) = false then
  begin
    Application.MessageBox('没有选择数据!', '提示', 0);
    Exit;
  end;
  try
    ADOQueryCmd.Connection.BeginTrans;
    with CDS_Main do
    begin
      DisableControls;
      First;
      while not eof do
      begin
        if Fieldbyname('ssel').AsBoolean then
        begin
          with ADOQueryCmd do
          begin
            close;
            sql.Clear;
            sql.Add('update Sketch_Main SET YF_MGQTF=''1'' ');
            sql.Add('where MGID =' + quotedstr(trim(CDS_Main.fieldbyname('MGID').AsString)));
            execsql;
          end;
          edit;
          CDS_Main.fieldbyname('YF_MGQTF1').Value := True;
        end;
        next;
      end;
      First;
      EnableControls;
    end;
    ADOQueryCmd.Connection.CommitTrans;
    application.MessageBox('操作成功！', '提示信息', 0);
  except
    ADOQueryCmd.Connection.RollbackTrans;
    application.MessageBox('操作失败！', '提示信息', 0);
  end;
end;

procedure TfrmMGFYBBMXGL.ToolButton17Click(Sender: TObject);
begin
  if CDS_Main.IsEmpty then
    exit;

  if CDS_Main.Locate('ssel', true, []) = false then
  begin
    Application.MessageBox('没有选择数据!', '提示', 0);
    Exit;
  end;
  try
    ADOQueryCmd.Connection.BeginTrans;
    with CDS_Main do
    begin
      DisableControls;
      First;
      while not eof do
      begin
        if Fieldbyname('ssel').AsBoolean then
        begin
          with ADOQueryCmd do
          begin
            close;
            sql.Clear;
            sql.Add('update Sketch_Main SET YF_DYQTF=''1'' ');
            sql.Add('where MGID =' + quotedstr(trim(CDS_Main.fieldbyname('MGID').AsString)));
            execsql;
          end;
          edit;
          CDS_Main.fieldbyname('YF_DYQTF1').Value := True;
        end;
        next;
      end;
      First;
      EnableControls;
    end;
    ADOQueryCmd.Connection.CommitTrans;
    application.MessageBox('操作成功！', '提示信息', 0);
  except
    ADOQueryCmd.Connection.RollbackTrans;
    application.MessageBox('操作失败！', '提示信息', 0);
  end;
end;

procedure TfrmMGFYBBMXGL.ToolButton2Click(Sender: TObject);
begin
  if CDS_Main.IsEmpty then
    exit;

  if CDS_Main.Locate('ssel', true, []) = false then
  begin
    Application.MessageBox('没有选择数据!', '提示', 0);
    Exit;
  end;
  try
    ADOQueryCmd.Connection.BeginTrans;
    with CDS_Main do
    begin
      DisableControls;
      First;
      while not eof do
      begin
        if Fieldbyname('ssel').AsBoolean then
        begin
          with ADOQueryCmd do
          begin
            close;
            sql.Clear;
            sql.Add('update Sketch_Main SET YF_MGF=''0'' ');
            sql.Add('where MGID =' + quotedstr(trim(CDS_Main.fieldbyname('MGID').AsString)));
            execsql;
            edit;
            CDS_Main.fieldbyname('YF_MGF1').Value := False;
          end;
        end;
        next;
      end;
      First;
      EnableControls;
    end;
    ADOQueryCmd.Connection.CommitTrans;
    application.MessageBox('操作成功！', '提示信息', 0);
  except
    ADOQueryCmd.Connection.RollbackTrans;
    application.MessageBox('操作失败！', '提示信息', 0);
  end;
end;

procedure TfrmMGFYBBMXGL.ToolButton3Click(Sender: TObject);
begin
  if CDS_Main.IsEmpty then
    exit;

  if CDS_Main.Locate('ssel', true, []) = false then
  begin
    Application.MessageBox('没有选择数据!', '提示', 0);
    Exit;
  end;
  try
    ADOQueryCmd.Connection.BeginTrans;
    with CDS_Main do
    begin
      DisableControls;
      First;
      while not eof do
      begin
        if Fieldbyname('ssel').AsBoolean then
        begin
          with ADOQueryCmd do
          begin
            close;
            sql.Clear;
            sql.Add('update Sketch_Main SET YF_XPKPF=''0'' ');
            sql.Add('where MGID =' + quotedstr(trim(CDS_Main.fieldbyname('MGID').AsString)));
            execsql;
          end;
          edit;
          CDS_Main.fieldbyname('YF_XPKPF1').Value := False;
        end;
        next;
      end;
      First;
      EnableControls;
    end;
    ADOQueryCmd.Connection.CommitTrans;
    application.MessageBox('操作成功！', '提示信息', 0);
  except
    ADOQueryCmd.Connection.RollbackTrans;
    application.MessageBox('操作失败！', '提示信息', 0);
  end;
end;

procedure TfrmMGFYBBMXGL.ToolButton4Click(Sender: TObject);
begin
  if CDS_Main.IsEmpty then
    exit;

  if CDS_Main.Locate('ssel', true, []) = false then
  begin
    Application.MessageBox('没有选择数据!', '提示', 0);
    Exit;
  end;
  try
    ADOQueryCmd.Connection.BeginTrans;
    with CDS_Main do
    begin
      DisableControls;
      First;
      while not eof do
      begin
        if Fieldbyname('ssel').AsBoolean then
        begin
          with ADOQueryCmd do
          begin
            close;
            sql.Clear;
            sql.Add('update Sketch_Main SET YF_DYF=''0'' ');
            sql.Add('where MGID =' + quotedstr(trim(CDS_Main.fieldbyname('MGID').AsString)));
            execsql;
          end;
          edit;
          CDS_Main.fieldbyname('YF_DYF1').Value := False;
        end;
        next;
      end;
      First;
      EnableControls;
    end;
    ADOQueryCmd.Connection.CommitTrans;
    application.MessageBox('操作成功！', '提示信息', 0);
  except
    ADOQueryCmd.Connection.RollbackTrans;
    application.MessageBox('操作失败！', '提示信息', 0);
  end;
end;

procedure TfrmMGFYBBMXGL.ToolButton5Click(Sender: TObject);
begin
  if CDS_Main.IsEmpty then
    exit;

  if CDS_Main.Locate('ssel', true, []) = false then
  begin
    Application.MessageBox('没有选择数据!', '提示', 0);
    Exit;
  end;
  try
    ADOQueryCmd.Connection.BeginTrans;
    with CDS_Main do
    begin
      DisableControls;
      First;
      while not eof do
      begin
        if Fieldbyname('ssel').AsBoolean then
        begin
          with ADOQueryCmd do
          begin
            close;
            sql.Clear;
            sql.Add('update Sketch_Main SET YF_DPKPF=''0'' ');
            sql.Add('where MGID =' + quotedstr(trim(CDS_Main.fieldbyname('MGID').AsString)));
            execsql;
          end;
          edit;
          CDS_Main.fieldbyname('YF_DPKPF1').Value := False;
        end;
        next;
      end;
      First;
      EnableControls;
    end;
    ADOQueryCmd.Connection.CommitTrans;
    application.MessageBox('操作成功！', '提示信息', 0);
  except
    ADOQueryCmd.Connection.RollbackTrans;
    application.MessageBox('操作失败！', '提示信息', 0);
  end;
end;

procedure TfrmMGFYBBMXGL.ToolButton6Click(Sender: TObject);
begin
  if CDS_Main.IsEmpty then
    exit;

  if CDS_Main.Locate('ssel', true, []) = false then
  begin
    Application.MessageBox('没有选择数据!', '提示', 0);
    Exit;
  end;
  try
    ADOQueryCmd.Connection.BeginTrans;
    with CDS_Main do
    begin
      DisableControls;
      First;
      while not eof do
      begin
        if Fieldbyname('ssel').AsBoolean then
        begin
          with ADOQueryCmd do
          begin
            close;
            sql.Clear;
            sql.Add('update Sketch_Main SET YF_DWZPF=''0'' ');
            sql.Add('where MGID =' + quotedstr(trim(CDS_Main.fieldbyname('MGID').AsString)));
            execsql;
          end;
          edit;
          CDS_Main.fieldbyname('YF_DWZPF1').Value := False;
        end;
        next;
      end;
      First;
      EnableControls;
    end;
    ADOQueryCmd.Connection.CommitTrans;
    application.MessageBox('操作成功！', '提示信息', 0);
  except
    ADOQueryCmd.Connection.RollbackTrans;
    application.MessageBox('操作失败！', '提示信息', 0);
  end;
end;

procedure TfrmMGFYBBMXGL.ToolButton7Click(Sender: TObject);
begin
  if CDS_Main.IsEmpty then
    exit;

  if CDS_Main.Locate('ssel', true, []) = false then
  begin
    Application.MessageBox('没有选择数据!', '提示', 0);
    Exit;
  end;
  try
    ADOQueryCmd.Connection.BeginTrans;
    with CDS_Main do
    begin
      DisableControls;
      First;
      while not eof do
      begin
        if Fieldbyname('ssel').AsBoolean then
        begin
          with ADOQueryCmd do
          begin
            close;
            sql.Clear;
            sql.Add('update Sketch_Main SET YF_MGQTF=''0'' ');
            sql.Add('where MGID =' + quotedstr(trim(CDS_Main.fieldbyname('MGID').AsString)));
            execsql;
          end;
          edit;
          CDS_Main.fieldbyname('YF_MGQTF1').Value := False;
        end;
        next;
      end;
      First;
      EnableControls;
    end;
    ADOQueryCmd.Connection.CommitTrans;
    application.MessageBox('操作成功！', '提示信息', 0);
  except
    ADOQueryCmd.Connection.RollbackTrans;
    application.MessageBox('操作失败！', '提示信息', 0);
  end;
end;

procedure TfrmMGFYBBMXGL.ToolButton8Click(Sender: TObject);
begin
  if CDS_Main.IsEmpty then
    exit;

  if CDS_Main.Locate('ssel', true, []) = false then
  begin
    Application.MessageBox('没有选择数据!', '提示', 0);
    Exit;
  end;
  try
    ADOQueryCmd.Connection.BeginTrans;
    with CDS_Main do
    begin
      DisableControls;
      First;
      while not eof do
      begin
        if Fieldbyname('ssel').AsBoolean then
        begin
          with ADOQueryCmd do
          begin
            close;
            sql.Clear;
            sql.Add('update Sketch_Main SET YF_DYQTF=''0'' ');
            sql.Add('where MGID =' + quotedstr(trim(CDS_Main.fieldbyname('MGID').AsString)));
            execsql;
          end;
          edit;
          CDS_Main.fieldbyname('YF_DYQTF1').Value := False;
        end;
        next;
      end;
      First;
      EnableControls;
    end;
    ADOQueryCmd.Connection.CommitTrans;
    application.MessageBox('操作成功！', '提示信息', 0);
  except
    ADOQueryCmd.Connection.RollbackTrans;
    application.MessageBox('操作失败！', '提示信息', 0);
  end;
end;

end.