unit U_SXCKNewList;

interface

uses
  Windows, Messages, SysUtils, Variants, Classes, Graphics, Controls, Forms,
  Dialogs, cxStyles, cxCustomData, cxGraphics, cxFilter, cxData, cxDataStorage,
  cxEdit, DB, cxDBData, cxGridCustomTableView, cxGridTableView,
  cxGridBandedTableView, cxGridDBBandedTableView, cxGridLevel, cxClasses,
  cxControls, cxGridCustomView, cxGridDBTableView, cxGrid, StdCtrls, ComCtrls,
  ExtCtrls, ToolWin, cxGridCustomPopupMenu, cxGridPopupMenu, ADODB, DBClient,
  cxDropDownEdit, cxCheckBox, RM_Common, RM_Class, RM_e_Xls, RM_Dataset,
  RM_System, RM_GridReport, Menus, cxCalendar, cxButtonEdit, cxTextEdit,
  cxLookAndFeels, cxLookAndFeelPainters, cxNavigator;

type
  TfrmSXCKNewList = class(TForm)
    ToolBar1: TToolBar;
    TBRafresh: TToolButton;
    TBFind: TToolButton;
    TBExport: TToolButton;
    TBClose: TToolButton;
    Panel1: TPanel;
    ADOQueryCmd: TADOQuery;
    ADOQueryMain: TADOQuery;
    ADOQueryTemp: TADOQuery;
    DataSource1: TDataSource;
    cxGridPopupMenu1: TcxGridPopupMenu;
    Label2: TLabel;
    BegDate: TDateTimePicker;
    EndDate: TDateTimePicker;
    CDS_Main: TClientDataSet;
    RM1: TRMGridReport;
    RMDBMain: TRMDBDataSet;
    RMXLSExport1: TRMXLSExport;
    RMDBHZ: TRMDBDataSet;
    CDS_HZ: TClientDataSet;
    CDS_PRT: TClientDataSet;
    TBDel: TToolButton;
    PopupMenu1: TPopupMenu;
    N1: TMenuItem;
    N2: TMenuItem;
    TBAdd: TToolButton;
    TBEdit: TToolButton;
    Label4: TLabel;
    Label5: TLabel;
    Label12: TLabel;
    FactoryName: TEdit;
    SPID: TEdit;
    CRType: TComboBox;
    Label7: TLabel;
    OrderNo: TEdit;
    cxGrid2: TcxGrid;
    Tv1: TcxGridDBTableView;
    v1Column6: TcxGridDBColumn;
    v1Column2: TcxGridDBColumn;
    v1Column4: TcxGridDBColumn;
    v1Column13: TcxGridDBColumn;
    v1Column14: TcxGridDBColumn;
    v1Column8: TcxGridDBColumn;
    v1Column7: TcxGridDBColumn;
    v1Column1: TcxGridDBColumn;
    v1Column11: TcxGridDBColumn;
    v1Column9: TcxGridDBColumn;
    v2Column6: TcxGridDBColumn;
    v1Column3: TcxGridDBColumn;
    v1Column12: TcxGridDBColumn;
    cxGrid2Level1: TcxGridLevel;
    v1Column16: TcxGridDBColumn;
    v1Column17: TcxGridDBColumn;
    Label10: TLabel;
    SPCode: TEdit;
    Label11: TLabel;
    pihao: TEdit;
    v1Column19: TcxGridDBColumn;
    Tv1Column1: TcxGridDBColumn;
    CheckBox1: TCheckBox;
    ToolButton1: TToolButton;
    Panel4: TPanel;
    Label1: TLabel;
    Button1: TButton;
    Button2: TButton;
    YWNOTE: TEdit;
    Tv1Column2: TcxGridDBColumn;
    Label3: TLabel;
    PBORDERNO: TEdit;
    Tv1Column3: TcxGridDBColumn;
    Label6: TLabel;
    HRNAME: TEdit;
    Tv1Column4: TcxGridDBColumn;
    Tv1Column5: TcxGridDBColumn;
    Label8: TLabel;
    YWZB: TEdit;
    Label9: TLabel;
    carxx: TEdit;
    Tv1Column6: TcxGridDBColumn;
    procedure FormDestroy(Sender: TObject);
    procedure FormClose(Sender: TObject; var Action: TCloseAction);
    procedure FormCreate(Sender: TObject);
    procedure TBRafreshClick(Sender: TObject);
    procedure ConNoMChange(Sender: TObject);
    procedure TBCloseClick(Sender: TObject);
    procedure FormShow(Sender: TObject);
    procedure TBExportClick(Sender: TObject);
    procedure TBFindClick(Sender: TObject);
    procedure N1Click(Sender: TObject);
    procedure N2Click(Sender: TObject);
    procedure TBDelClick(Sender: TObject);
    procedure TBAddClick(Sender: TObject);
    procedure TBEditClick(Sender: TObject);
    procedure SPIDKeyPress(Sender: TObject; var Key: Char);
    procedure SPIDChange(Sender: TObject);
    procedure SPSpecChange(Sender: TObject);
    procedure FactoryNameChange(Sender: TObject);
    procedure SPCodeKeyPress(Sender: TObject; var Key: Char);
    procedure CRTypeChange(Sender: TObject);
    procedure CheckBox1Click(Sender: TObject);
    procedure ToolButton1Click(Sender: TObject);
    procedure Button2Click(Sender: TObject);
    procedure Button1Click(Sender: TObject);
  private
    canshu1, canshu2, canshu3: string;
    procedure InitGrid();
    { Private declarations }
  public
    { Public declarations }
  end;

var
  frmSXCKNewList: TfrmSXCKNewList;

implementation

uses
  U_DataLink, U_RTFun, U_SXCKInPut;

{$R *.dfm}

procedure TfrmSXCKNewList.FormDestroy(Sender: TObject);
begin
  frmSXCKNewList := nil;
end;

procedure TfrmSXCKNewList.FormClose(Sender: TObject; var Action: TCloseAction);
begin
  Action := caFree;
end;

procedure TfrmSXCKNewList.FormCreate(Sender: TObject);
begin
  //cxGrid1.Align:=alClient;
  EndDate.DateTime := SGetServerDate10(ADOQueryTemp);
  BegDate.DateTime := EndDate.DateTime;
  canshu1 := Trim(DParameters1);
  canshu2 := Trim(DParameters2);
  canshu3 := Trim(DParameters3);
end;

procedure TfrmSXCKNewList.InitGrid();
var
  pwhere: string;
begin
  if SGetFilters(Panel1, 1, 2) <> '' then
    pwhere := ' and ' + SGetFilters(Panel1, 1, 2);
  try
    ADOQueryMain.DisableControls;
    with ADOQueryMain do
    begin
      Filtered := False;
      Close;
      sql.Clear;
      SQL.Add('SELECT * FROM (');
      sql.Add(' select A.* ');
      SQL.Add(',HRNAME=ISNULL((SELECT TOP 1 ISNULL(COHRNAME,CONAME) FROM COMPANY B WHERE A.FactoryName=B.CONAME AND VALID=''Y'' and cotype=''供应商''),FACTORYNAME)');
      SQL.Add(',TOHRNAME=ISNULL((SELECT TOP 1 ISNULL(COHRNAME,CONAME) FROM COMPANY B WHERE A.ToFactoryName=B.CONAME AND VALID=''Y'' and cotype=''供应商''),ToFactoryName)');

      sql.Add(' from CK_SXPB_CR A where 1=1');
      if CheckBox1.Checked = true then
      begin
        sql.add(' and A.CRTime>=''' + Trim(FormatDateTime('yyyy-MM-dd', BegDate.DateTime)) + '''');
        sql.Add(' and A.CRTime<''' + Trim(FormatDateTime('yyyy-MM-dd', enddate.DateTime + 1)) + '''');
      end;

      sql.Add(' and isnull(CKName,'''')=''坯布''');
      SQL.Add(' and CRFlag=''入库''  ');
      SQL.Add(')AA WHERE 1=1');
      sql.Add(pwhere);
      Open;
      //ShowMessage(SQL.Text);
    end;
    SCreateCDS20(ADOQueryMain, CDS_Main);
    SInitCDSData20(ADOQueryMain, CDS_Main);
  finally
    ADOQueryMain.EnableControls;
  end;
end;

procedure TfrmSXCKNewList.TBRafreshClick(Sender: TObject);
begin
  BegDate.SetFocus;
  InitGrid();
end;

procedure TfrmSXCKNewList.ConNoMChange(Sender: TObject);
begin
  if ADOQueryMain.Active then
  begin
    SDofilter(ADOQueryMain, SGetFilters(Panel1, 1, 2));
  end;
end;

procedure TfrmSXCKNewList.TBCloseClick(Sender: TObject);
begin
  WriteCxGrid('坯布入库列表', Tv1, '坯布仓库1');
  Close;
end;

procedure TfrmSXCKNewList.FormShow(Sender: TObject);
begin
  ReadCxGrid('坯布入库列表', Tv1, '坯布仓库1');
  if Trim(canshu2) = '查看' then
  begin
    TBAdd.Visible := False;
    TBDel.Visible := False;
    TBEdit.Visible := False;
  end
  else
  begin
    TBAdd.Visible := True;
    TBDel.Visible := True;
    TBEdit.Visible := True;
  end;
  //InitGrid();
end;

procedure TfrmSXCKNewList.TBExportClick(Sender: TObject);
begin
  if ADOQueryMain.IsEmpty then
    exit;
  TcxGridToExcel('坯布入库列表', cxGrid2);
end;

procedure TfrmSXCKNewList.TBFindClick(Sender: TObject);
begin
  if ADOQueryMain.Active then
  begin
    SDofilter(ADOQueryMain, SGetFilters(Panel1, 1, 2));
    SCreateCDS20(ADOQueryMain, CDS_Main);
    SInitCDSData20(ADOQueryMain, CDS_Main);
  end;
end;

procedure TfrmSXCKNewList.N1Click(Sender: TObject);
begin
  SelOKNo(CDS_Main, True);
end;

procedure TfrmSXCKNewList.N2Click(Sender: TObject);
begin
  SelOKNo(CDS_Main, False);
end;

procedure TfrmSXCKNewList.TBDelClick(Sender: TObject);
begin
  if CDS_Main.IsEmpty then
    Exit;
  if trim(CDS_Main.FieldByName('Filler').AsString) <> Trim(DName) then
  begin
    Application.MessageBox('不能操作他人数据!', '提示', 0);
    Exit;
  end;
  if Trim(CDS_Main.fieldbyname('SPID').AsString) <> '' then
  begin
    if Trim(CDS_Main.fieldbyname('CRType').AsString) = '平移入库' then
    begin
      Application.MessageBox('平移入库的数据为自动生成，不能删除!', '提示', 0);
      Exit;
    end;
    with ADOQueryTemp do
    begin
      Close;
      sql.Clear;
      sql.Add('select * from CK_SXPB_CR where FZSPID=''' + Trim(CDS_Main.fieldbyname('SPID').AsString) + '''');
      sql.Add(' and CRQtyFlag=-1');
      Open;
    end;
    if ADOQueryTemp.IsEmpty = False then
    begin
      Application.MessageBox('已有出库记录，不能删除!', '提示', 0);
      Exit;
    end;
    if Application.MessageBox('确定要删除数据吗？', '提示', 32 + 4) <> IDYES then
      Exit;
    try
      ADOQueryCmd.Connection.BeginTrans;

      with ADOQueryCmd do
      begin
        Close;
        sql.Clear;
        sql.Add(' delete CK_SXPB_CR where SPID=''' + Trim(CDS_Main.fieldbyname('SPID').AsString) + '''');
        ExecSQL;
      end;
      ADOQueryCmd.Connection.CommitTrans;
      CDS_Main.Delete;
    except
      ADOQueryCmd.Connection.RollbackTrans;
      Application.MessageBox('删除异常!', '提示', 0);
    end;

  end
  else
  begin
    CDS_Main.Delete;
  end;
end;

procedure TfrmSXCKNewList.TBAddClick(Sender: TObject);
begin
  try
    frmSXCKInPut := TfrmSXCKInPut.Create(Application);
    with frmSXCKInPut do
    begin
      FBCId := '';
      frmSXCKInPut.canshu3 := Trim(Self.canshu3);
      if ShowModal = 1 then
      begin
        Self.InitGrid();
      end;
    end;
  finally
    frmSXCKInPut.Free;
  end;
end;

procedure TfrmSXCKNewList.TBEditClick(Sender: TObject);
begin
  if CDS_Main.IsEmpty then
    Exit;
//  if trim(CDS_Main.FieldByName('Filler').AsString) <> Trim(DName) then
//  begin
//    Application.MessageBox('不能操作他人数据!', '提示', 0);
//    Exit;
//  end;
  if Trim(CDS_Main.fieldbyname('CRType').AsString) = '平移入库' then
  begin
    Application.MessageBox('平移入库的数据为自动生成，不能修改!', '提示', 0);
    Exit;
  end;
  try
    frmSXCKInPut := TfrmSXCKInPut.Create(Application);
    with frmSXCKInPut do
    begin
      if Trim(CDS_Main.fieldbyname('filler').AsString) <> Trim(DName) then
      begin
        fzdr := '1';
      end;
      FBCId := Trim(CDS_Main.fieldbyname('SPID').AsString);
      TBDel.Visible := False;
      TBAdd.Visible := False;
      if ShowModal = 1 then
      begin
        Self.InitGrid();
      end;
    end;
  finally
    frmSXCKInPut.Free;
  end;
end;

procedure TfrmSXCKNewList.SPIDKeyPress(Sender: TObject; var Key: Char);
begin
  if Key = #13 then
  begin

    InitGrid();
  end;
end;

procedure TfrmSXCKNewList.SPIDChange(Sender: TObject);
begin
  if Length(Trim(SPID.Text)) < 4 then
  begin
    if Trim(SPID.Text) <> '' then
      Exit;
  end;
  TBFind.Click;
end;

procedure TfrmSXCKNewList.SPSpecChange(Sender: TObject);
begin
  TBFind.Click;
end;

procedure TfrmSXCKNewList.FactoryNameChange(Sender: TObject);
begin
  TBFind.Click;
end;

procedure TfrmSXCKNewList.SPCodeKeyPress(Sender: TObject; var Key: Char);
begin
  if Key = #13 then
  begin
    InitGrid();
  end;
end;

procedure TfrmSXCKNewList.CRTypeChange(Sender: TObject);
begin
  InitGrid();
end;

procedure TfrmSXCKNewList.CheckBox1Click(Sender: TObject);
begin
  InitGrid();
end;

procedure TfrmSXCKNewList.ToolButton1Click(Sender: TObject);
begin
  Panel4.Visible := true;
end;

procedure TfrmSXCKNewList.Button2Click(Sender: TObject);
begin
  Panel4.Visible := False;
end;

procedure TfrmSXCKNewList.Button1Click(Sender: TObject);
begin
  if Application.MessageBox('修改编号会同时修改出库编号，确定吗？', '提示', 32 + 4) <> IDYES then
    Exit;
  if trim(YWNOTE.Text) = '' then
  begin
    Application.MessageBox('编号不能为空!', '提示', 0);
    Exit;
  end;
  try
    CDS_Main.DisableControls;
    ADOQueryCmd.Connection.BeginTrans;
    with CDS_Main do
    begin

      with ADOQueryCmd do
      begin
        Close;
        sql.Clear;

        sql.Add('Update CK_SXPB_CR Set spcode=''' + trim(YWNOTE.Text) + ''' ');
        sql.Add('where   FZSPID=''' + Trim(CDS_Main.fieldbyname('spid').AsString) + '''');
        ExecSQL;

      end;

    end;
    ADOQueryCmd.Connection.CommitTrans;
    CDS_Main.EnableControls;
    application.MessageBox('数据保存成功！', '提示信息');
    Panel4.Visible := false;
    TBRafresh.Click;
    exit;
  except
    ADOQueryCmd.Connection.RollbackTrans;
    CDS_Main.EnableControls;
    application.MessageBox('数据保存失败！', '提示信息', 0);
  end;
end;

end.