unit U_ShaOutList;

interface

uses
  Windows, Messages, SysUtils, Variants, Classes, Graphics, Controls, Forms,
  Dialogs, cxStyles, cxCustomData, cxGraphics, cxFilter, cxData,
  cxDataStorage, cxEdit, DB, cxDBData, cxGridCustomTableView,
  cxGridTableView, cxGridBandedTableView, cxGridDBBandedTableView,
  cxGridLevel, cxClasses, cxControls, cxGridCustomView, cxGridDBTableView,
  cxGrid, StdCtrls, ComCtrls, ExtCtrls, ToolWin, cxGridCustomPopupMenu,
  cxGridPopupMenu, ADODB, DBClient, cxDropDownEdit, cxCheckBox, RM_Common,
  RM_Class, RM_e_Xls, RM_Dataset, RM_System, RM_GridReport, Menus,
  cxCalendar, cxButtonEdit, cxTextEdit;

type
  TfrmShaOutList = class(TForm)
    ToolBar1: TToolBar;
    TBRafresh: TToolButton;
    TBFind: TToolButton;
    TBExport: TToolButton;
    TBClose: TToolButton;
    Panel1: TPanel;
    ADOQueryCmd: TADOQuery;
    ADOQueryMain: TADOQuery;
    ADOQueryTemp: TADOQuery;
    DataSource1: TDataSource;
    cxGridPopupMenu1: TcxGridPopupMenu;
    Label1: TLabel;
    Label2: TLabel;
    BegDate: TDateTimePicker;
    EndDate: TDateTimePicker;
    CDS_Main: TClientDataSet;
    RM1: TRMGridReport;
    RMDBMain: TRMDBDataSet;
    RMXLSExport1: TRMXLSExport;
    RMDBHZ: TRMDBDataSet;
    CDS_HZ: TClientDataSet;
    CDS_PRT: TClientDataSet;
    TBDel: TToolButton;
    PopupMenu1: TPopupMenu;
    N1: TMenuItem;
    N2: TMenuItem;
    TBAdd: TToolButton;
    TBEdit: TToolButton;
    cxGrid2: TcxGrid;
    Tv1: TcxGridDBTableView;
    v1Column6: TcxGridDBColumn;
    v1Column2: TcxGridDBColumn;
    v1Column4: TcxGridDBColumn;
    v1Column15: TcxGridDBColumn;
    v1Column13: TcxGridDBColumn;
    v1Column14: TcxGridDBColumn;
    v2Column1: TcxGridDBColumn;
    v1Column8: TcxGridDBColumn;
    v1Column7: TcxGridDBColumn;
    v1Column16: TcxGridDBColumn;
    v1Column9: TcxGridDBColumn;
    v2Column6: TcxGridDBColumn;
    v1Column3: TcxGridDBColumn;
    v1Column11: TcxGridDBColumn;
    v1Column5: TcxGridDBColumn;
    v1Column18: TcxGridDBColumn;
    v1Column19: TcxGridDBColumn;
    v1Column17: TcxGridDBColumn;
    v1Column12: TcxGridDBColumn;
    cxGrid2Level1: TcxGridLevel;
    Label3: TLabel;
    Label4: TLabel;
    Label5: TLabel;
    Label8: TLabel;
    Label12: TLabel;
    Label6: TLabel;
    Label7: TLabel;
    Label9: TLabel;
    SPName: TEdit;
    FactoryName: TEdit;
    SPID: TEdit;
    SPSpec: TEdit;
    CRType: TComboBox;
    SPCF: TEdit;
    QCorderNo: TEdit;
    SSType: TComboBox;
    Label10: TLabel;
    CKorderNo: TEdit;
    Label11: TLabel;
    FromFactoryName: TEdit;
    Label13: TLabel;
    ToFactoryName: TEdit;
    Label14: TLabel;
    SPCode: TEdit;
    v1Column20: TcxGridDBColumn;
    v1Column1: TcxGridDBColumn;
    v1Column10: TcxGridDBColumn;
    ToolButton1: TToolButton;
    ADOQueryPrint: TADOQuery;
    v1Column21: TcxGridDBColumn;
    v1Column22: TcxGridDBColumn;
    Label15: TLabel;
    SPColor: TEdit;
    ToolButton2: TToolButton;
    v1Column23: TcxGridDBColumn;
    CheckBox1: TCheckBox;
    procedure FormDestroy(Sender: TObject);
    procedure FormClose(Sender: TObject; var Action: TCloseAction);
    procedure FormCreate(Sender: TObject);
    procedure TBRafreshClick(Sender: TObject);
    procedure ConNoMChange(Sender: TObject);
    procedure TBCloseClick(Sender: TObject);
    procedure FormShow(Sender: TObject);
    procedure TBExportClick(Sender: TObject);
    procedure TBFindClick(Sender: TObject);
    procedure SPNameChange(Sender: TObject);
    procedure SPIDChange(Sender: TObject);
    procedure SPIDKeyPress(Sender: TObject; var Key: Char);
    procedure N1Click(Sender: TObject);
    procedure N2Click(Sender: TObject);
    procedure TBDelClick(Sender: TObject);
    procedure TBAddClick(Sender: TObject);
    procedure TBEditClick(Sender: TObject);
    procedure SPSpecChange(Sender: TObject);
    procedure ToolButton1Click(Sender: TObject);
    procedure ToolButton2Click(Sender: TObject);
    procedure CheckBox1Click(Sender: TObject);
  private
    canshu1,canshu2:string;
    procedure InitGrid();
    { Private declarations }
  public
    { Public declarations }
  end;

var
  frmShaOutList: TfrmShaOutList;

implementation
uses
  U_DataLink,U_RTFun,U_ShaOutPut,U_SXCKTHPut;

{$R *.dfm}

procedure TfrmShaOutList.FormDestroy(Sender: TObject);
begin
  frmShaOutList:=nil;
end;

procedure TfrmShaOutList.FormClose(Sender: TObject;
  var Action: TCloseAction);
begin
  Action:=caFree;
end;

procedure TfrmShaOutList.FormCreate(Sender: TObject);
begin
  //cxGrid1.Align:=alClient;
  canshu1:=Trim(DParameters1);
  canshu2:=Trim(DParameters2);
  EndDate.DateTime:=SGetServerDate(ADOQueryTemp);
  BegDate.DateTime:=EndDate.DateTime-90;
end;

procedure TfrmShaOutList.InitGrid();
begin
  try
    ADOQueryMain.DisableControls;
    with ADOQueryMain do
    begin
      Close;
      Filtered:=False;
      sql.Clear;
      sql.Add(' select A.* ,B.SOrddefstr1,B.PRTColor,B.PRTHX');
      sql.Add(',QCOrderNo=(select OrderNO from JYOrder_Main JM where JM.MainId=A.ORDMainIdRK)');
      sql.Add(',CKorderNo=(select OrderNO from JYOrder_Main JM where JM.MainId=A.ORDMainIdCK)');
      sql.Add(',CGconNo=(select conNo from ContractSX_Main JM where JM.MainId=A.CGMainID)');
      sql.Add(' from CK_SXPB_CR A');
      sql.Add(' left join JYOrder_Sub B on A.ORDSubIdCK=B.SubId');
      sql.add(' where A.CRTime>='''+Trim(FormatDateTime('yyyy-MM-dd',BegDate.DateTime))+'''');
      sql.Add(' and A.CRTime<='''+Trim(FormatDateTime('yyyy-MM-dd',enddate.DateTime+1))+'''');
      SQL.Add(' and CRFlag=''出库''  ');
      SQL.Add(' and isnull(CKName,'''')=''纱线'' ');
      Open;
      //ShowMessage(SQL.Text);
    end;
    SCreateCDS(ADOQueryMain,CDS_Main);
    SInitCDSData(ADOQueryMain,CDS_Main);
  finally
    ADOQueryMain.EnableControls;
  end;
end;

procedure TfrmShaOutList.TBRafreshClick(Sender: TObject);
begin
  InitGrid();
end;

procedure TfrmShaOutList.ConNoMChange(Sender: TObject);
begin
  if ADOQueryMain.Active then
  begin
    SDofilter(ADOQueryMain,SGetFilters(Panel1,1,2));
  end;
end;

procedure TfrmShaOutList.TBCloseClick(Sender: TObject);
begin
  WriteCxGrid('纱线出库列表',Tv1,'纱线仓库');
  Close;
end;

procedure TfrmShaOutList.FormShow(Sender: TObject);
begin
  if Trim(canshu2)='查看' then
  begin
    TBAdd.Visible:=False;
    TBDel.Visible:=False;
    TBEdit.Visible:=False;
  end else
  begin
    TBAdd.Visible:=True;
    TBDel.Visible:=True;
    TBEdit.Visible:=True;
  end;
  ReadCxGrid('纱线出库列表',Tv1,'纱线仓库');
  //InitGrid();
end;

procedure TfrmShaOutList.TBExportClick(Sender: TObject);
begin
  if ADOQueryMain.IsEmpty then exit;
  TcxGridToExcel('纱线出库列表',cxGrid2);
end;

procedure TfrmShaOutList.TBFindClick(Sender: TObject);
begin
  if ADOQueryMain.Active then
  begin
    SDofilter(ADOQueryMain,SGetFilters(Panel1,1,2));
    SCreateCDS(ADOQueryMain,CDS_Main);
    SInitCDSData(ADOQueryMain,CDS_Main);
  end;
end;

procedure TfrmShaOutList.SPNameChange(Sender: TObject);
begin
  TBFind.Click;
end;

procedure TfrmShaOutList.SPIDChange(Sender: TObject);
begin
  if Length(Trim(SPID.Text))<4 then
  begin
    if Trim(SPID.Text)<>'' then Exit;
  end;
  TBFind.Click;
end;

procedure TfrmShaOutList.SPIDKeyPress(Sender: TObject;
  var Key: Char);
begin
  if Key=#13 then
  begin
    {if Length(Trim(SPID.Text))<4 then Exit;
    try
      ADOQueryMain.DisableControls;
      with ADOQueryMain do
      begin
        Filtered:=False;
        Close;
        sql.Clear;
        sql.Add(' select A.* ');
        sql.Add(' from CK_SXPB_CR A');
        sql.add(' where SPID like :SXID');
        Parameters.ParamByName('SXID').Value:='%'+Trim(SPID.Text)+'%';
        Open;
        //ShowMessage(SQL.Text);
      end;
      SCreateCDS(ADOQueryMain,CDS_Main);
      SInitCDSData(ADOQueryMain,CDS_Main);
    finally
      ADOQueryMain.EnableControls;
    end; }
  end;
end;

procedure TfrmShaOutList.N1Click(Sender: TObject);
begin
  SelOKNo(CDS_Main,True);
end;

procedure TfrmShaOutList.N2Click(Sender: TObject);
begin
  SelOKNo(CDS_Main,False);
end;

procedure TfrmShaOutList.TBDelClick(Sender: TObject);
begin
  if CDS_Main.IsEmpty then Exit;
  if Trim(CDS_Main.fieldbyname('SPID').AsString)<>'' then
  begin
    if Trim(CDS_Main.fieldbyname('CRType').AsString)='平移出库' then
    begin
      with ADOQueryTemp do
      begin
        Close;
        sql.Clear;
        sql.Add('select * from CK_SXPB_CR where FZSPID=');
        sql.Add('(select SPID from CK_SXPB_CR where PYID='''+Trim(CDS_Main.fieldbyname('SPID').AsString)+'''');
        sql.Add(' and isnull(CRType,'''')=''平移入库'')');
        sql.Add(' and CRQtyFlag=-1');
        Open;
      end;
      if ADOQueryTemp.IsEmpty=False then
      begin
        Application.MessageBox('已有出库记录，不能删除!','提示',0);
        Exit;
      end;
    end;

    if Application.MessageBox('确定要删除数据吗？','提示',32+4)<>IDYES then Exit;
    try
      ADOQueryCmd.Connection.BeginTrans;
      with ADOQueryCmd do
      begin
        Close;
        sql.Clear;
        sql.Add(' delete CK_SXPB_CR where SPID='''+Trim(CDS_Main.fieldbyname('SPID').AsString)+'''');
        sql.Add(' Update CK_SXPB_CR Set MXKCQty=(select sum(isnull(Qty,0)*CRQtyFlag) from CK_SXPB_CR A where A.FZSPID=CK_SXPB_CR.SPID)');
        sql.Add(',MXKCPiQty=(select sum(isnull(PiQty,0)*CRQtyFlag) from CK_SXPB_CR A where A.FZSPID=CK_SXPB_CR.SPID)');
        sql.Add(' where SPID='''+Trim(CDS_Main.fieldbyname('FZSPID').AsString)+'''');
        if Trim(CDS_Main.fieldbyname('CRType').AsString)='平移出库' then
        begin
          sql.Add(' delete CK_SXPB_CR where PYID='''+Trim(CDS_Main.fieldbyname('SPID').AsString)+'''');
        end;
        ExecSQL;
      end;
      ADOQueryCmd.Connection.CommitTrans;
    except
      ADOQueryCmd.Connection.RollbackTrans;
      Application.MessageBox('删除异常!','提示',0);
    end;
  end;
  CDS_Main.Delete;
end;

procedure TfrmShaOutList.TBAddClick(Sender: TObject);
begin
  try
    frmShaOutPut:=TfrmShaOutPut.Create(Application);
    with frmShaOutPut do
    begin
      FBCId:='';
      frmShaOutPut.canshu1:=Trim(Self.canshu1);
      if ShowModal=1 then
      begin
        Self.InitGrid();
      end;
    end;
  finally
    frmShaOutPut.Free;
  end;
end;

procedure TfrmShaOutList.TBEditClick(Sender: TObject);
begin
  if CDS_Main.IsEmpty then Exit;
  with ADOQueryTemp do
  begin
    Close;
    sql.Clear;
    sql.Add('select * from CK_SXPB_CR where FZSPID=');
    sql.Add('(select SPID from CK_SXPB_CR where PYID='''+Trim(CDS_Main.fieldbyname('SPID').AsString)+'''');
    sql.Add(' and isnull(CRType,'''')=''平移入库'')');
    sql.Add(' and CRQtyFlag=-1');
    Open;
  end;
  if ADOQueryTemp.IsEmpty=False then
  begin
    Application.MessageBox('已有出库记录，不能修改!','提示',0);
    Exit;
  end;
  try
    frmShaOutPut:=TfrmShaOutPut.Create(Application);
    with frmShaOutPut do
    begin
      FBCId:=Trim(CDS_Main.fieldbyname('SPID').AsString);
      TBDel.Visible:=False;
      TBAdd.Visible:=False;
      if ShowModal=1 then
      begin
        Self.InitGrid();
      end;
    end;
  finally
    frmShaOutPut.Free;
  end;

end;

procedure TfrmShaOutList.SPSpecChange(Sender: TObject);
begin
  TBFind.Click;
end;

procedure TfrmShaOutList.ToolButton1Click(Sender: TObject);
var
   fPrintFile:string;
   Txt,fImagePath:string;
   Moudle: THandle;
   Makebar:TMakebar;
   Mixtext:TMixtext;

begin
  if CDS_Main.IsEmpty then Exit;
  //if Trim(CDS_Main.fieldbyname('CRType').AsString)<>'检验出库' then Exit;
  if CDS_Main.Locate('SSel',True,[])=False then
  begin
    Application.MessageBox('没有选择数据!','提示',0);
    Exit;
  end;
  fPrintFile:= ExtractFilePath(Application.ExeName) + 'Report\检验指示单标签.rmf' ;
  CDS_Main.DisableControls;
  with CDS_Main do
  begin
    First;
    while CDS_Main.Locate('SSel',True,[]) do
    begin
      with ADOQueryPrint do
      begin
        Close;
        sql.Clear;
        sql.Add(' select A.* ,B.SOrddefstr1,B.PRTColor,B.PRTHX,C.OrderNo,C.MPRTCodeName');
        sql.Add(',C.CustomerNoName,C.ConNo');
        sql.Add(',khCode=(select zdyNameZ from KH_Zdy_Attachment X where X.zdyname=C.CustomerNoName and X.Type=''KHName'') ');
        sql.Add(',khConNo=(select top 1 khConNo from JYOrderCon_Main X where X.ConNO=C.conNO) ');
        sql.Add(' from CK_SXPB_CR A');
        sql.Add(' left join JYOrder_Sub B on A.ORDSubIdCK=B.SubId');
        sql.Add(' left join JYOrder_Main C on A.ORDMainIdCK=C.MainId');
        sql.Add(' where A.SPId='''+Trim(CDS_Main.fieldbyname('SPId').AsString)+'''');
        Open;
      end;
      SCreateCDS(ADOQueryPrint,CDS_PRT);
      SInitCDSData(ADOQueryPrint,CDS_PRT);
      try
        Moudle:=LoadLibrary('MakeQRBarcode.dll');
        @Makebar:=GetProcAddress(Moudle,'Make');
        @Mixtext:=GetProcAddress(Moudle,'MixText');
        Txt:=Trim(CDS_PRT.fieldbyname('SPID').AsString);
        fImagePath:=ExtractFilePath(Application.ExeName)+'image\temp.bmp' ;
        if not DirectoryExists(pchar(ExtractFilePath(Application.ExeName)+'image')) then
            CreateDirectory(pchar(ExtractFilePath(Application.ExeName)+'image'),nil);
        if FileExists(fImagePath) then DeleteFile(fImagePath);
        Makebar(pchar(Txt),Length(Txt),3,3,0,PChar(fImagePath),3);
      except
        CDS_Main.EnableControls;
        application.MessageBox('条形码生成失败！','提示信息',MB_ICONERROR);
        exit;
      end;

      if FileExists(fPrintFile) then
      begin
        RMVariables['QRBARCODE']:=fImagePath;
        RM1.LoadFromFile(fPrintFile);
        //RM1.ShowReport;
        RM1.PrintReport;
      end else
      begin
        CDS_Main.EnableControls;
        Application.MessageBox(PChar('没有找'+ExtractFilePath(Application.ExeName)+'Report\面料检验指示单标签.rmf'),'提示',0);
        Exit;
      end;
      Edit;
      FieldByName('SSel').Value:=False;
      Post;
    end;
  end;
  CDS_Main.EnableControls;
end;

procedure TfrmShaOutList.ToolButton2Click(Sender: TObject);
var
  FFacName,fPrintFile:String;
  i:Integer;
begin
  if CDS_Main.IsEmpty then Exit;
  if CDS_Main.Locate('SSel',True,[])=False then
  begin
    Application.MessageBox('没有选择数据','提示',0);
    Exit;
  end;

  with ADOQueryCmd do
  begin
    Close;
    sql.Clear;
    sql.Add('SELECT * FROM TBSubID where 1=2 ');
    open;
  end;
  FFacName:='';
  CDS_Main.DisableControls;
  try
    i:=0;
    ADOQueryCmd.Connection.BeginTrans;
    with CDS_Main do
    begin
      First;
      while not Eof do
      begin
        if FieldByName('SSel').AsBoolean then
        begin
          with ADOQueryPrint do
          begin
            Close;
            sql.Clear;
            sql.Add(' select A.* ,B.SOrddefstr1,B.PRTColor,B.PRTHX,C.OrderNo,C.MPRTCodeName');
            sql.Add(',C.CustomerNoName,C.ConNo');
            sql.Add(',khCode=(select zdyNameZ from KH_Zdy_Attachment X where X.zdyname=C.CustomerNoName and X.Type=''KHName'') ');
            sql.Add(',khConNo=(select top 1 khConNo from JYOrderCon_Main X where X.ConNO=C.conNO) ');
            sql.Add(' from CK_SXPB_CR A');
            sql.Add(' left join JYOrder_Sub B on A.ORDSubIdCK=B.SubId');
            sql.Add(' left join JYOrder_Main C on A.ORDMainIdCK=C.MainId');
            sql.Add(' where A.SPId='''+Trim(CDS_Main.fieldbyname('SPId').AsString)+'''');
            Open;
          end;
          if i=0 then SCreateCDS(ADOQueryPrint,CDS_PRT);
          SInitCDSData(ADOQueryPrint,CDS_PRT);

          if Trim(FFacName)='' then
          begin
            FFacName:=Trim(CDS_Main.fieldbyname('ToFactoryName').AsString);
          end else
          begin
            if Trim(CDS_Main.fieldbyname('ToFactoryName').AsString)<>FFacName then
            begin
              Application.MessageBox('选择的不是同一个工厂，不能一起打印！','提示信息',0);
              ADOQueryCmd.Connection.RollbackTrans;
              EnableControls;
              Exit;
            end;
          end;
          i:=i+1;
        end;
        Next;
      end;
    end;
    ADOQueryCmd.Connection.CommitTrans;
  except
    ADOQueryCmd.Connection.RollbackTrans;
  end;
  CDS_Main.EnableControls;

  fPrintFile:= ExtractFilePath(Application.ExeName) + 'Report\辅料出库单.rmf' ;
  if FileExists(fPrintFile) then
  begin
    RM1.LoadFromFile(fPrintFile);
    RM1.ShowReport;
  end
  else
  begin
    Application.MessageBox(PChar('没有找'+fPrintFile),'提示',0);
  end;
end;

procedure TfrmShaOutList.CheckBox1Click(Sender: TObject);
begin
  SelOKNo(CDS_Main,CheckBox1.Checked);
end;

end.