unit U_SXCKNewList;

interface

uses
  Windows, Messages, SysUtils, Variants, Classes, Graphics, Controls, Forms,
  Dialogs, cxStyles, cxCustomData, cxGraphics, cxFilter, cxData, cxDataStorage,
  cxEdit, DB, cxDBData, cxGridCustomTableView, cxGridTableView,
  cxGridBandedTableView, cxGridDBBandedTableView, cxGridLevel, cxClasses,
  cxControls, cxGridCustomView, cxGridDBTableView, cxGrid, StdCtrls, ComCtrls,
  ExtCtrls, ToolWin, cxGridCustomPopupMenu, cxGridPopupMenu, ADODB, DBClient,
  cxDropDownEdit, cxCheckBox, RM_Common, RM_Class, RM_e_Xls, RM_Dataset,
  RM_System, RM_GridReport, Menus, cxCalendar, cxButtonEdit, cxTextEdit,
  cxLookAndFeels, cxLookAndFeelPainters, cxNavigator, U_BaseList, dxSkinsCore,
  dxSkinsDefaultPainters, dxDateRanges, dxBarBuiltInMenu;

type
  TfrmSXCKNewList = class(TfrmBaseList)
    ToolBar1: TToolBar;
    TBRafresh: TToolButton;
    TBFind: TToolButton;
    TBExport: TToolButton;
    TBClose: TToolButton;
    Panel1: TPanel;
    ADOQueryCmd: TADOQuery;
    ADOQueryMain: TADOQuery;
    ADOQueryTemp: TADOQuery;
    DataSource1: TDataSource;
    cxGridPopupMenu1: TcxGridPopupMenu;
    Label1: TLabel;
    Label2: TLabel;
    BegDate: TDateTimePicker;
    EndDate: TDateTimePicker;
    CDS_Main: TClientDataSet;
    RM1: TRMGridReport;
    RMDBMain: TRMDBDataSet;
    RMXLSExport1: TRMXLSExport;
    RMDBHZ: TRMDBDataSet;
    CDS_HZ: TClientDataSet;
    CDS_PRT: TClientDataSet;
    TBDel: TToolButton;
    PopupMenu1: TPopupMenu;
    N1: TMenuItem;
    N2: TMenuItem;
    TBAdd: TToolButton;
    TBEdit: TToolButton;
    Label3: TLabel;
    Label4: TLabel;
    Label5: TLabel;
    Label8: TLabel;
    Label12: TLabel;
    SPName: TEdit;
    FactoryName: TEdit;
    SPID: TEdit;
    SPSpec: TEdit;
    CRType: TComboBox;
    Label6: TLabel;
    SPCF: TEdit;
    Label7: TLabel;
    OrderNo: TEdit;
    cxGrid2: TcxGrid;
    Tv1: TcxGridDBTableView;
    v1Column6: TcxGridDBColumn;
    v1Column2: TcxGridDBColumn;
    v1Column4: TcxGridDBColumn;
    v1Column15: TcxGridDBColumn;
    v1Column13: TcxGridDBColumn;
    v1Column14: TcxGridDBColumn;
    v2Column1: TcxGridDBColumn;
    v1Column8: TcxGridDBColumn;
    v1Column7: TcxGridDBColumn;
    v1Column1: TcxGridDBColumn;
    v1Column10: TcxGridDBColumn;
    v1Column11: TcxGridDBColumn;
    v1Column9: TcxGridDBColumn;
    v2Column6: TcxGridDBColumn;
    v1Column3: TcxGridDBColumn;
    v1Column5: TcxGridDBColumn;
    v1Column12: TcxGridDBColumn;
    cxGrid2Level1: TcxGridLevel;
    Label9: TLabel;
    SSType: TComboBox;
    v1Column16: TcxGridDBColumn;
    v1Column17: TcxGridDBColumn;
    Label10: TLabel;
    SPCode: TEdit;
    Label11: TLabel;
    ToFactoryName: TEdit;
    v1Column18: TcxGridDBColumn;
    v1Column19: TcxGridDBColumn;
    v1Column21: TcxGridDBColumn;
    v1Column22: TcxGridDBColumn;
    v1Column20: TcxGridDBColumn;
    Tv1Column1: TcxGridDBColumn;
    procedure FormDestroy(Sender: TObject);
    procedure FormClose(Sender: TObject; var Action: TCloseAction);
    procedure FormCreate(Sender: TObject);
    procedure TBRafreshClick(Sender: TObject);
    procedure ConNoMChange(Sender: TObject);
    procedure TBCloseClick(Sender: TObject);
    procedure FormShow(Sender: TObject);
    procedure TBExportClick(Sender: TObject);
    procedure TBFindClick(Sender: TObject);
    procedure N1Click(Sender: TObject);
    procedure N2Click(Sender: TObject);
    procedure TBDelClick(Sender: TObject);
    procedure TBAddClick(Sender: TObject);
    procedure TBEditClick(Sender: TObject);
    procedure SPIDKeyPress(Sender: TObject; var Key: Char);
    procedure SPIDChange(Sender: TObject);
    procedure SPSpecChange(Sender: TObject);
    procedure FactoryNameChange(Sender: TObject);
  private
    canshu1, canshu2, canshu3: string;
    procedure InitGrid();
    { Private declarations }
  public
    { Public declarations }
  end;

var
  frmSXCKNewList: TfrmSXCKNewList;

implementation

uses
  U_DataLink, U_RTFun, U_SXCKInPut;

{$R *.dfm}

procedure TfrmSXCKNewList.FormDestroy(Sender: TObject);
begin
  inherited;
  frmSXCKNewList := nil;
end;

procedure TfrmSXCKNewList.FormClose(Sender: TObject; var Action: TCloseAction);
begin
  inherited;
  Action := caFree;
end;

procedure TfrmSXCKNewList.FormCreate(Sender: TObject);
begin
  inherited;
  //cxGrid1.Align:=alClient;
  EndDate.DateTime := SGetServerDate(ADOQueryTemp);
  BegDate.DateTime := EndDate.DateTime;
  canshu1 := Trim(DParameters1);
  canshu2 := Trim(DParameters2);
  canshu3 := Trim(DParameters3);
end;

procedure TfrmSXCKNewList.InitGrid();
begin
  try
    ADOQueryMain.DisableControls;
    with ADOQueryMain do
    begin
      Filtered := False;
      Close;
      sql.Clear;
      sql.Add(' select A.* ');
      sql.Add(',SPEName=(select Note from KH_ZDY X where X.Type=''PBName'' and X.ZDYName=A.SPName )');
      sql.Add(',OrderNO=(select OrderNO from JYOrder_Main JM where JM.MainId=A.ORDMainIdRK)');
      sql.Add(',ZdyNameZ=(select max(COHRNAME) from Company X where X.coname=A.FactoryName)');
      sql.Add(',GJ=(case when QtyUnit=''Kg'' then Qty else 0 end)');
      sql.Add(',MS=(case when QtyUnit=''M'' then Qty else (case when QtyUnit=''Y'' then Qty*0.9144 else 0 end) end)');
      sql.Add(' from CK_SXPB_CR A');
      sql.add(' where A.CRTime>=''' + Trim(FormatDateTime('yyyy-MM-dd', BegDate.DateTime)) + '''');
      sql.Add(' and A.CRTime<=''' + Trim(FormatDateTime('yyyy-MM-dd', enddate.DateTime + 1)) + '''');
      sql.Add(' and isnull(CKName,'''')=''坯布''');
      SQL.Add(' and CRFlag=''入库''  ');
      Open;
      //ShowMessage(SQL.Text);
    end;
    SCreateCDS(ADOQueryMain, CDS_Main);
    SInitCDSData(ADOQueryMain, CDS_Main);
  finally
    ADOQueryMain.EnableControls;
  end;
end;

procedure TfrmSXCKNewList.TBRafreshClick(Sender: TObject);
begin
  BegDate.SetFocus;
  InitGrid();
end;

procedure TfrmSXCKNewList.ConNoMChange(Sender: TObject);
begin
  if ADOQueryMain.Active then
  begin
    SDofilter(ADOQueryMain, SGetFilters(Panel1, 1, 2));
  end;
end;

procedure TfrmSXCKNewList.TBCloseClick(Sender: TObject);
begin
  WriteCxGrid('坯布入库列表', Tv1, '坯布仓库');
  Close;
end;

procedure TfrmSXCKNewList.FormShow(Sender: TObject);
begin
  inherited;
  ReadCxGrid('坯布入库列表', Tv1, '坯布仓库');
  if Trim(canshu2) = '查看' then
  begin
    TBAdd.Visible := False;
    TBDel.Visible := False;
    TBEdit.Visible := False;
  end
  else
  begin
    TBAdd.Visible := True;
    TBDel.Visible := True;
    TBEdit.Visible := True;
  end;
  //InitGrid();
end;

procedure TfrmSXCKNewList.TBExportClick(Sender: TObject);
begin
  if ADOQueryMain.IsEmpty then
    exit;
  TcxGridToExcel('坯布入库列表', cxGrid2);
end;

procedure TfrmSXCKNewList.TBFindClick(Sender: TObject);
begin
  if ADOQueryMain.Active then
  begin
    SDofilter(ADOQueryMain, SGetFilters(Panel1, 1, 2));
    SCreateCDS(ADOQueryMain, CDS_Main);
    SInitCDSData(ADOQueryMain, CDS_Main);
  end;
end;

procedure TfrmSXCKNewList.N1Click(Sender: TObject);
begin
  SelOKNo(CDS_Main, True);
end;

procedure TfrmSXCKNewList.N2Click(Sender: TObject);
begin
  SelOKNo(CDS_Main, False);
end;

procedure TfrmSXCKNewList.TBDelClick(Sender: TObject);
begin
  if CDS_Main.IsEmpty then
    Exit;
  if trim(CDS_Main.FieldByName('Filler').AsString) <> Trim(DName) then
  begin
    Application.MessageBox('不能操作他人数据!', '提示', 0);
    Exit;
  end;
  if Trim(CDS_Main.fieldbyname('SPID').AsString) <> '' then
  begin
    with ADOQueryTemp do
    begin
      Close;
      sql.Clear;
      sql.Add('exec P_CW_Judge_All @DataID=' + quotedstr(Trim(CDS_Main.fieldbyname('SPID').AsString)));
      Open;
    end;
    if ADOQueryTemp.FieldByName('intReturn').AsInteger = -1 then
    begin
      Application.MessageBox(PChar(ADOQueryTemp.fieldbyname('ShowMsg').AsString), '提示', 0);
      exit;
    end;

    if Trim(CDS_Main.fieldbyname('CRType').AsString) = '平移入库' then
    begin
      Application.MessageBox('平移入库的数据为自动生成，不能删除!', '提示', 0);
      ADOQueryCmd.Connection.RollbackTrans;
      Exit;
    end;

 

    with ADOQueryTemp do
    begin
      Close;
      sql.Clear;
      sql.Add('select * from CK_SXPB_CR where FZSPID=''' + Trim(CDS_Main.fieldbyname('SPID').AsString) + '''');
      sql.Add(' and CRQtyFlag=-1');
      Open;
    end;
    if ADOQueryTemp.IsEmpty = False then
    begin
      Application.MessageBox('已有出库记录，不能删除!', '提示', 0);
      Exit;
    end;

    if Application.MessageBox('确定要删除数据吗？', '提示', 32 + 4) <> IDYES then
      Exit;
    try
      ADOQueryCmd.Connection.BeginTrans;

      with ADOQueryCmd do
      begin
        Close;
        sql.Clear;
        sql.Add(' delete CK_SXPB_CR where SPID=''' + Trim(CDS_Main.fieldbyname('SPID').AsString) + '''');
        sql.Add(' exec P_CW_SXPB ''' + Trim(CDS_Main.fieldbyname('SPID').AsString) + '''');
        ExecSQL;
      end;
      ADOQueryCmd.Connection.CommitTrans;
      CDS_Main.Delete;
    except
      ADOQueryCmd.Connection.RollbackTrans;
      Application.MessageBox('删除异常!', '提示', 0);
    end;

  end
  else
  begin
    CDS_Main.Delete;
  end;
end;

procedure TfrmSXCKNewList.TBAddClick(Sender: TObject);
begin
  try
    frmSXCKInPut := TfrmSXCKInPut.Create(Application);
    with frmSXCKInPut do
    begin
      FBCId := '';
      frmSXCKInPut.canshu3 := Trim(Self.canshu3);
      if ShowModal = 1 then
      begin
        Self.InitGrid();
      end;
    end;
  finally
    frmSXCKInPut.Free;
  end;
end;

procedure TfrmSXCKNewList.TBEditClick(Sender: TObject);
begin
  if CDS_Main.IsEmpty then
    Exit;
  if trim(CDS_Main.FieldByName('Filler').AsString) <> Trim(DName) then
  begin
    Application.MessageBox('不能操作他人数据!', '提示', 0);
    Exit;
  end;
  if Trim(CDS_Main.fieldbyname('CRType').AsString) = '平移入库' then
  begin
    Application.MessageBox('平移入库的数据为自动生成，不能修改!', '提示', 0);
    Exit;
  end;

  with ADOQueryTemp do
  begin
    Close;
    sql.Clear;
    sql.Add('exec P_CW_Judge_All @DataID=' + quotedstr(Trim(CDS_Main.fieldbyname('SPID').AsString)));
    Open;
  end;
  if ADOQueryTemp.FieldByName('intReturn').AsInteger = -1 then
  begin
    Application.MessageBox(PChar(ADOQueryTemp.fieldbyname('ShowMsg').AsString), '提示', 0);
    exit;
  end;



  try
    frmSXCKInPut := TfrmSXCKInPut.Create(Application);
    with frmSXCKInPut do
    begin
      FBCId := Trim(CDS_Main.fieldbyname('SPID').AsString);
      TBDel.Visible := False;
      TBAdd.Visible := False;
      if ShowModal = 1 then
      begin
        Self.InitGrid();
      end;
    end;
  finally
    frmSXCKInPut.Free;
  end;
end;

procedure TfrmSXCKNewList.SPIDKeyPress(Sender: TObject; var Key: Char);
begin
  if Key = #13 then
  begin
    {if Length(Trim(SPID.Text))<4 then Exit;
    try
      ADOQueryMain.DisableControls;
      with ADOQueryMain do
      begin
        Filtered:=False;
        Close;
        sql.Clear;
        sql.Add(' select A.* ');
        sql.Add(',ConNo=(select ConNo from Contract_Main CM where CM.MainId=A.CGMainId)');
        //sql.Add(' ,ConNo=(select ConNo from Contract_Main CM where CM.MainId=A.CGMainId )');
        sql.Add(' from CK_SXPB_CR A');
        sql.add(' where SPID like :SXID');
        Parameters.ParamByName('SXID').Value:='%'+Trim(SXID.Text)+'%';
        Open;
        //ShowMessage(SQL.Text);
      end;
      SCreateCDS(ADOQueryMain,CDS_Main);
      SInitCDSData(ADOQueryMain,CDS_Main);
    finally
      ADOQueryMain.EnableControls;
    end;  }
  end;
end;

procedure TfrmSXCKNewList.SPIDChange(Sender: TObject);
begin
  if Length(Trim(SPID.Text)) < 4 then
  begin
    if Trim(SPID.Text) <> '' then
      Exit;
  end;
  TBFind.Click;
end;

procedure TfrmSXCKNewList.SPSpecChange(Sender: TObject);
begin
  TBFind.Click;
end;

procedure TfrmSXCKNewList.FactoryNameChange(Sender: TObject);
begin
  TBFind.Click;
end;

end.