unit U_SXCKNewList;

interface

uses
  Windows, Messages, SysUtils, Variants, Classes, Graphics, Controls, Forms,
  Dialogs, cxStyles, cxCustomData, cxGraphics, cxFilter, cxData, cxDataStorage,
  cxEdit, DB, cxDBData, cxGridCustomTableView, cxGridTableView,
  cxGridBandedTableView, cxGridDBBandedTableView, cxGridLevel, cxClasses,
  cxControls, cxGridCustomView, cxGridDBTableView, cxGrid, StdCtrls, ComCtrls,
  ExtCtrls, ToolWin, cxGridCustomPopupMenu, cxGridPopupMenu, ADODB, DBClient,
  cxDropDownEdit, cxCheckBox, RM_Common, RM_Class, RM_e_Xls, RM_Dataset,
  RM_System, RM_GridReport, Menus, cxCalendar, cxButtonEdit, cxTextEdit,
  cxLookAndFeels, cxLookAndFeelPainters, cxNavigator;

type
  TfrmSXCKNewList = class(TForm)
    ToolBar1: TToolBar;
    TBRafresh: TToolButton;
    TBFind: TToolButton;
    TBExport: TToolButton;
    TBClose: TToolButton;
    Panel1: TPanel;
    ADOQueryCmd: TADOQuery;
    ADOQueryMain: TADOQuery;
    ADOQueryTemp: TADOQuery;
    DataSource1: TDataSource;
    cxGridPopupMenu1: TcxGridPopupMenu;
    Label1: TLabel;
    Label2: TLabel;
    BegDate: TDateTimePicker;
    EndDate: TDateTimePicker;
    CDS_Main: TClientDataSet;
    RM1: TRMGridReport;
    RMDBMain: TRMDBDataSet;
    RMXLSExport1: TRMXLSExport;
    RMDBHZ: TRMDBDataSet;
    CDS_HZ: TClientDataSet;
    CDS_PRT: TClientDataSet;
    TBDel: TToolButton;
    PopupMenu1: TPopupMenu;
    N1: TMenuItem;
    N2: TMenuItem;
    TBAdd: TToolButton;
    TBEdit: TToolButton;
    Label3: TLabel;
    Label4: TLabel;
    Label5: TLabel;
    Label8: TLabel;
    Label12: TLabel;
    SPName: TEdit;
    FactoryName: TEdit;
    SPID: TEdit;
    SPSpec: TEdit;
    CRType: TComboBox;
    Label6: TLabel;
    SPCF: TEdit;
    Label7: TLabel;
    OrderNo: TEdit;
    cxGrid2: TcxGrid;
    Tv1: TcxGridDBTableView;
    v1Column6: TcxGridDBColumn;
    v1Column2: TcxGridDBColumn;
    v1Column4: TcxGridDBColumn;
    v1Column15: TcxGridDBColumn;
    v1Column13: TcxGridDBColumn;
    v1Column14: TcxGridDBColumn;
    v2Column1: TcxGridDBColumn;
    v1Column8: TcxGridDBColumn;
    v1Column7: TcxGridDBColumn;
    v1Column1: TcxGridDBColumn;
    v1Column10: TcxGridDBColumn;
    v1Column11: TcxGridDBColumn;
    v1Column9: TcxGridDBColumn;
    v2Column6: TcxGridDBColumn;
    v1Column3: TcxGridDBColumn;
    v1Column5: TcxGridDBColumn;
    v1Column12: TcxGridDBColumn;
    cxGrid2Level1: TcxGridLevel;
    Label9: TLabel;
    SSType: TComboBox;
    v1Column16: TcxGridDBColumn;
    v1Column17: TcxGridDBColumn;
    Label10: TLabel;
    SPCode: TEdit;
    Label11: TLabel;
    ToFactoryName: TEdit;
    ToolButton1: TToolButton;
    v1SSel: TcxGridDBColumn;
    ADOQueryPrint: TADOQuery;
    Label13: TLabel;
    SPType: TComboBox;
    v1Column18: TcxGridDBColumn;
    ToolButton2: TToolButton;
    v1Column19: TcxGridDBColumn;
    v1Column20: TcxGridDBColumn;
    v1Column21: TcxGridDBColumn;
    v1Column22: TcxGridDBColumn;
    v1Column23: TcxGridDBColumn;
    v1Column24: TcxGridDBColumn;
    v1Column25: TcxGridDBColumn;
    v1Column26: TcxGridDBColumn;
    v1Column27: TcxGridDBColumn;
    v1Column28: TcxGridDBColumn;
    v1Column29: TcxGridDBColumn;
    procedure FormDestroy(Sender: TObject);
    procedure FormClose(Sender: TObject; var Action: TCloseAction);
    procedure FormCreate(Sender: TObject);
    procedure TBRafreshClick(Sender: TObject);
    procedure ConNoMChange(Sender: TObject);
    procedure TBCloseClick(Sender: TObject);
    procedure FormShow(Sender: TObject);
    procedure TBExportClick(Sender: TObject);
    procedure TBFindClick(Sender: TObject);
    procedure N1Click(Sender: TObject);
    procedure N2Click(Sender: TObject);
    procedure TBDelClick(Sender: TObject);
    procedure TBAddClick(Sender: TObject);
    procedure TBEditClick(Sender: TObject);
    procedure SPIDKeyPress(Sender: TObject; var Key: Char);
    procedure SPIDChange(Sender: TObject);
    procedure SPSpecChange(Sender: TObject);
    procedure FactoryNameChange(Sender: TObject);
    procedure ToolButton1Click(Sender: TObject);
    procedure ToolButton2Click(Sender: TObject);
  private
    canshu1, canshu2, canshu3: string;
    procedure InitGrid();
    { Private declarations }
  public
    { Public declarations }
  end;

var
  frmSXCKNewList: TfrmSXCKNewList;

implementation

uses
  U_DataLink, U_RTFun, U_SXCKInPut, U_FjList10;

{$R *.dfm}

procedure TfrmSXCKNewList.FormDestroy(Sender: TObject);
begin
  frmSXCKNewList := nil;
end;

procedure TfrmSXCKNewList.FormClose(Sender: TObject; var Action: TCloseAction);
begin
  Action := caFree;
end;

procedure TfrmSXCKNewList.FormCreate(Sender: TObject);
begin
  //cxGrid1.Align:=alClient;
  EndDate.DateTime := SGetServerDate10(ADOQueryTemp);
  BegDate.DateTime := EndDate.DateTime - 90;
  canshu1 := Trim(DParameters1);
  canshu2 := Trim(DParameters2);
  canshu3 := Trim(DParameters3);
end;

procedure TfrmSXCKNewList.InitGrid();
begin
  try
    ADOQueryMain.DisableControls;
    with ADOQueryMain do
    begin
      Filtered := False;
      Close;
      sql.Clear;
      sql.Add(' select A.* ');
      sql.Add(' ,OrderNO=(select OrderNO from JYOrder_Main JM where JM.MainId=A.ORDMainIdRK)');
      sql.Add(' ,ZMoney=cast(cast(isnull(A.PBPrice,0) as decimal(18,2))*cast(isnull(A.Qty,0) as decimal(18,2)) as decimal(18,2)) ');
      sql.Add(' from CK_SXPB_CR A');
      sql.add(' where A.CRTime>=''' + Trim(FormatDateTime('yyyy-MM-dd', BegDate.DateTime)) + '''');
      sql.Add(' and A.CRTime<=''' + Trim(FormatDateTime('yyyy-MM-dd', enddate.DateTime + 1)) + '''');
      sql.Add(' and isnull(CKName,'''')=''坯布''');
      SQL.Add(' and CRFlag=''入库''  ');
      Open;
//      ShowMessage(SQL.Text);
    end;
    SCreateCDS20(ADOQueryMain, CDS_Main);
    SInitCDSData20(ADOQueryMain, CDS_Main);
  finally
    ADOQueryMain.EnableControls;
  end;
end;

procedure TfrmSXCKNewList.TBRafreshClick(Sender: TObject);
begin
  BegDate.SetFocus;
  InitGrid();
end;

procedure TfrmSXCKNewList.ConNoMChange(Sender: TObject);
begin
  if ADOQueryMain.Active then
  begin
    SDofilter(ADOQueryMain, SGetFilters(Panel1, 1, 2));
  end;
end;

procedure TfrmSXCKNewList.TBCloseClick(Sender: TObject);
begin
  WriteCxGrid('坯布入库列表', Tv1, '坯布仓库');
  Close;
end;

procedure TfrmSXCKNewList.FormShow(Sender: TObject);
begin
  ReadCxGrid('坯布入库列表', Tv1, '坯布仓库');
  if Trim(canshu2) = '查看' then
  begin
    TBAdd.Visible := False;
    TBDel.Visible := False;
    TBEdit.Visible := False;
  end
  else
  begin
    TBAdd.Visible := True;
    TBDel.Visible := True;
    TBEdit.Visible := True;
  end;
  //InitGrid();
end;

procedure TfrmSXCKNewList.TBExportClick(Sender: TObject);
begin
  if ADOQueryMain.IsEmpty then
    exit;
  TcxGridToExcel('坯布入库列表', cxGrid2);
end;

procedure TfrmSXCKNewList.TBFindClick(Sender: TObject);
begin
  if ADOQueryMain.Active then
  begin
    SDofilter(ADOQueryMain, SGetFilters(Panel1, 1, 2));
    SCreateCDS20(ADOQueryMain, CDS_Main);
    SInitCDSData20(ADOQueryMain, CDS_Main);
  end;
end;

procedure TfrmSXCKNewList.N1Click(Sender: TObject);
begin
  SelOKNo(CDS_Main, True);
end;

procedure TfrmSXCKNewList.N2Click(Sender: TObject);
begin
  SelOKNo(CDS_Main, False);
end;

procedure TfrmSXCKNewList.TBDelClick(Sender: TObject);
begin
  if CDS_Main.IsEmpty then
    Exit;
  if Trim(CDS_Main.fieldbyname('SPID').AsString) <> '' then
  begin
    if Trim(CDS_Main.fieldbyname('CRType').AsString) = '平移入库' then
    begin
      Application.MessageBox('平移入库的数据为自动生成，不能删除!', '提示', 0);
      Exit;
    end;
    with ADOQueryTemp do
    begin
      Close;
      sql.Clear;
      sql.Add('select * from CK_SXPB_CR where FZSPID=''' + Trim(CDS_Main.fieldbyname('SPID').AsString) + '''');
      sql.Add(' and CRQtyFlag=-1');
      Open;
    end;
    if ADOQueryTemp.IsEmpty = False then
    begin
      Application.MessageBox('已有出库记录，不能删除!', '提示', 0);
      Exit;
    end;

    with ADOQueryTemp do
    begin
      Close;
      SQL.Clear;
      SQL.Add('select * from YF_Money_CR where MainId=' + QuotedStr(Trim(CDS_Main.fieldbyname('SPID').AsString)));
      SQL.Add('and CRFlag=''应付付'' and yfname<>''坯布其他费'' ');
      Open;
    end;
    if ADOQueryTemp.IsEmpty = False then
    begin
      Application.MessageBox('已生成应付款数据，不能删除!', '提示', 0);
      Exit;
    end;

    if Application.MessageBox('确定要删除数据吗？', '提示', 32 + 4) <> IDYES then
      Exit;
    try
      ADOQueryCmd.Connection.BeginTrans;

      with ADOQueryCmd do
      begin
        Close;
        sql.Clear;
        sql.Add(' delete CK_SXPB_CR where SPID=''' + Trim(CDS_Main.fieldbyname('SPID').AsString) + '''');
        {sql.Add('Update CK_SXPB_KC Set KCKGQty=(select sum(isnull(KGQty,0)*CRQtyFlag) from CK_SXPB_CR A where A.CRID=CK_SXPB_KC.CRID)');
        sql.Add(',KCPiQty=(select sum(isnull(PiQty,0)*CRQtyFlag) from CK_SXPB_CR A where A.CRID=CK_SXPB_KC.CRID)');
        sql.Add(' where CRID='+Trim(CDS_Main.fieldbyname('CRID').AsString));}
        sql.Add('delete TP_File where WBID=''' + Trim(CDS_Main.fieldbyname('SPID').AsString) + ''' ');
        ExecSQL;
      end;

      with ADOQueryCmd do
      begin
        Close;
        sql.Clear;
        sql.Add(' delete YF_Money_CR where mainid=''' + Trim(CDS_Main.fieldbyname('SPID').AsString) + '''');
        ExecSQL;
      end;

      with ADOQueryCmd do
      begin
        Close;
        sql.Clear;
        sql.Add(' delete YF_Money_LL where frommainid=''' + Trim(CDS_Main.fieldbyname('SPID').AsString) + '''');
        ExecSQL;
      end;

     { with ADOQueryTemp do
      begin
        Close;
        sql.Clear;
        sql.Add('select KCKGQty=isnull(KCKGQty,0) from CK_SXPB_KC where CRID='+Trim(CDS_Main.fieldbyname('CRID').AsString));
        Open;
      end;
      if ADOQueryTemp.IsEmpty=False then
      begin
        if ADOQueryTemp.FieldByName('KCKGQty').Value<0 then
        begin
          ADOQueryCmd.Connection.RollbackTrans;
          Application.MessageBox('入库公斤数小于出库公斤数不能删除!','提示',0);
          Exit;
        end;
      end;  }

      ADOQueryCmd.Connection.CommitTrans;
      CDS_Main.Delete;
    except
      ADOQueryCmd.Connection.RollbackTrans;
      Application.MessageBox('删除异常!', '提示', 0);
    end;

  end
  else
  begin
    CDS_Main.Delete;
  end;
end;

procedure TfrmSXCKNewList.TBAddClick(Sender: TObject);
begin
  try
    frmSXCKInPut := TfrmSXCKInPut.Create(Application);
    with frmSXCKInPut do
    begin
      FBCId := '';
      frmSXCKInPut.canshu3 := Trim(Self.canshu3);
      if ShowModal = 1 then
      begin
        Self.InitGrid();
      end;
    end;
  finally
    frmSXCKInPut.Free;
  end;
end;

procedure TfrmSXCKNewList.TBEditClick(Sender: TObject);
begin
  if CDS_Main.IsEmpty then
    Exit;
  if Trim(CDS_Main.fieldbyname('CRType').AsString) = '平移入库' then
  begin
    Application.MessageBox('平移入库的数据为自动生成，不能修改!', '提示', 0);
    Exit;
  end;
  with ADOQueryTemp do
  begin
    Close;
    SQL.Clear;
    SQL.Add('select * from YF_Money_CR where MainId=' + QuotedStr(Trim(CDS_Main.fieldbyname('SPID').AsString)));
    SQL.Add('and CRFlag=''应付付'' and YFName<>''坯布其他费'' ');
    Open;
  end;
  if ADOQueryTemp.IsEmpty = False then
  begin
    Application.MessageBox('已生成应付款数据，不能修改!', '提示', 0);
    Exit;
  end;
  try
    frmSXCKInPut := TfrmSXCKInPut.Create(Application);
    with frmSXCKInPut do
    begin
      FBCId := Trim(CDS_Main.fieldbyname('SPID').AsString);
      TBDel.Visible := False;
      TBAdd.Visible := False;
      if ShowModal = 1 then
      begin
        Self.InitGrid();
      end;
    end;
  finally
    frmSXCKInPut.Free;
  end;
end;

procedure TfrmSXCKNewList.SPIDKeyPress(Sender: TObject; var Key: Char);
begin
  if Key = #13 then
  begin
    {if Length(Trim(SPID.Text))<4 then Exit;
    try
      ADOQueryMain.DisableControls;
      with ADOQueryMain do
      begin
        Filtered:=False;
        Close;
        sql.Clear;
        sql.Add(' select A.* ');
        sql.Add(',ConNo=(select ConNo from Contract_Main CM where CM.MainId=A.CGMainId)');
        //sql.Add(' ,ConNo=(select ConNo from Contract_Main CM where CM.MainId=A.CGMainId )');
        sql.Add(' from CK_SXPB_CR A');
        sql.add(' where SPID like :SXID');
        Parameters.ParamByName('SXID').Value:='%'+Trim(SXID.Text)+'%';
        Open;
        //ShowMessage(SQL.Text);
      end;
      SCreateCDS20(ADOQueryMain,CDS_Main);
      SInitCDSData20(ADOQueryMain,CDS_Main);
    finally
      ADOQueryMain.EnableControls;
    end;  }
  end;
end;

procedure TfrmSXCKNewList.SPIDChange(Sender: TObject);
begin
  if Length(Trim(SPID.Text)) < 4 then
  begin
    if Trim(SPID.Text) <> '' then
      Exit;
  end;
  TBFind.Click;
end;

procedure TfrmSXCKNewList.SPSpecChange(Sender: TObject);
begin
  TBFind.Click;
end;

procedure TfrmSXCKNewList.FactoryNameChange(Sender: TObject);
begin
  TBFind.Click;
end;

procedure TfrmSXCKNewList.ToolButton1Click(Sender: TObject);
var
  FFacName, FSPID, FCRType, fPrintFile: string;
  i: Integer;
begin
  if CDS_Main.IsEmpty then
    Exit;
  if CDS_Main.Locate('SSel', True, []) = False then
  begin
    Application.MessageBox('没有选择数据', '提示', 0);
    Exit;
  end;

//  with ADOQueryCmd do
//  begin
//    Close;
//    sql.Clear;
//    sql.Add('SELECT * FROM TBSubID where 1=2 ');
//    open;
//  end;
  FFacName := '';
  FSPID := '';
  FCRType := '';
  CDS_Main.DisableControls;
  try
    i := 0;
    ADOQueryCmd.Connection.BeginTrans; //
    with CDS_Main do
    begin
      First;
      while not Eof do
      begin
        if FieldByName('SSel').AsBoolean then
        begin
          with ADOQueryPrint do
          begin
            Close;
            sql.Clear;
            sql.Add('select A.*, ');
            sql.Add('FromOrderNo=(select X.OrderNo from JYOrder_Main X where X.MainId=A.ORDMainIdRK)');
            sql.Add('from CK_SXPB_CR A ');
            sql.Add(' where A.SPId=''' + Trim(CDS_Main.fieldbyname('SPId').AsString) + '''');
            Open;
          end;
          if i = 0 then
            SCreateCDS20(ADOQueryPrint, CDS_PRT);
          SInitCDSData20(ADOQueryPrint, CDS_PRT);
 {
          if Trim(FSPID)='' then
          begin
            FSPID:=Trim(CDS_Main.fieldbyname('SPID').AsString);
          end else
          begin
            if Trim(CDS_Main.fieldbyname('SPID').AsString)<>FSPID then
            begin
              Application.MessageBox('不同入库单号，不能一起打印！','提示信息',0);
              ADOQueryPrint.Connection.RollbackTrans;     //
              EnableControls;
              Exit;
            end;
          end;
                }
          if Trim(FCRType) = '' then
          begin
            FCRType := Trim(CDS_Main.fieldbyname('CRType').AsString);
          end
          else
          begin
            if Trim(CDS_Main.fieldbyname('CRType').AsString) <> FCRType then
            begin
              Application.MessageBox('不同入库类型，不能一起打印！', '提示信息', 0);
              ADOQueryPrint.Connection.RollbackTrans;     //
              EnableControls;
              Exit;
            end;
          end;

          if Trim(FFacName) = '' then
          begin
            FFacName := Trim(CDS_Main.fieldbyname('FactoryName').AsString);
          end
          else
          begin
//            if Trim(CDS_Main.fieldbyname('FactoryName').AsString) <> FFacName then
//            begin
//              Application.MessageBox('不是同一个供应商，不能一起打印！', '提示信息', 0);
//              ADOQueryPrint.Connection.RollbackTrans;     //
//              EnableControls;
//              Exit;
//            end;
          end;
          i := i + 1;
        end;
        Next;
      end;
    end;
    ADOQueryCmd.Connection.CommitTrans;       //
  except
    ADOQueryCmd.Connection.RollbackTrans;    //
  end;
  CDS_Main.EnableControls;
//  SCreateCDS20(ADOQueryPrint,CDS_PRT);
//  SInitCDSData20(ADOQueryPrint,CDS_PRT);

  fPrintFile := ExtractFilePath(Application.ExeName) + 'Report\贸易坯布入库单.rmf';
  if FileExists(fPrintFile) then
  begin
    RM1.LoadFromFile(fPrintFile);
    RM1.ShowReport;
  end
  else
  begin
    Application.MessageBox(PChar('没有找' + fPrintFile), '提示', 0);
  end;
end;

procedure TfrmSXCKNewList.ToolButton2Click(Sender: TObject);
begin
  if CDS_Main.IsEmpty then
    Exit;
  try
    frmFjList10 := TfrmFjList10.Create(Application);
    with frmFjList10 do
    begin
//      PState:=1;
      fkeyNO := Trim(Self.CDS_Main.fieldbyname('SPID').AsString);
      fType := '坯布';
      if ShowModal = 1 then
      begin

      end;
    end;
  finally
    frmFjList10.Free;
  end;
end;

end.