unit U_SXCKOutList;

interface

uses
  Windows, Messages, SysUtils, Variants, Classes, Graphics, Controls, Forms,
  Dialogs, cxStyles, cxCustomData, cxGraphics, cxFilter, cxData, cxDataStorage,
  cxEdit, DB, cxDBData, cxGridCustomTableView, cxGridTableView,
  cxGridBandedTableView, cxGridDBBandedTableView, cxGridLevel, cxClasses,
  cxControls, cxGridCustomView, cxGridDBTableView, cxGrid, StdCtrls, ComCtrls,
  ExtCtrls, ToolWin, cxGridCustomPopupMenu, cxGridPopupMenu, ADODB, DBClient,
  cxDropDownEdit, cxCheckBox, RM_Common, RM_Class, RM_e_Xls, RM_Dataset,
  RM_System, RM_GridReport, Menus, cxCalendar, cxButtonEdit, cxTextEdit,
  cxLookAndFeels, cxLookAndFeelPainters, cxNavigator;

type
  TfrmSXCKOutList = class(TForm)
    ToolBar1: TToolBar;
    TBRafresh: TToolButton;
    TBFind: TToolButton;
    TBExport: TToolButton;
    TBClose: TToolButton;
    Panel1: TPanel;
    ADOQueryCmd: TADOQuery;
    ADOQueryMain: TADOQuery;
    ADOQueryTemp: TADOQuery;
    DataSource1: TDataSource;
    cxGridPopupMenu1: TcxGridPopupMenu;
    Label1: TLabel;
    Label2: TLabel;
    BegDate: TDateTimePicker;
    EndDate: TDateTimePicker;
    CDS_Main: TClientDataSet;
    RM1: TRMGridReport;
    RMDBMain: TRMDBDataSet;
    RMXLSExport1: TRMXLSExport;
    RMDBHZ: TRMDBDataSet;
    CDS_HZ: TClientDataSet;
    CDS_PRT: TClientDataSet;
    TBDel: TToolButton;
    PopupMenu1: TPopupMenu;
    N1: TMenuItem;
    N2: TMenuItem;
    TBAdd: TToolButton;
    TBEdit: TToolButton;
    cxGrid2: TcxGrid;
    Tv1: TcxGridDBTableView;
    v1Column6: TcxGridDBColumn;
    v1Column2: TcxGridDBColumn;
    v1Column4: TcxGridDBColumn;
    v1Column14: TcxGridDBColumn;
    v2Column1: TcxGridDBColumn;
    v1Column8: TcxGridDBColumn;
    v1Column7: TcxGridDBColumn;
    v1Column1: TcxGridDBColumn;
    v1Column10: TcxGridDBColumn;
    v1Column16: TcxGridDBColumn;
    v1Column9: TcxGridDBColumn;
    v2Column6: TcxGridDBColumn;
    v1Column3: TcxGridDBColumn;
    v1Column11: TcxGridDBColumn;
    v1Column18: TcxGridDBColumn;
    v1Column19: TcxGridDBColumn;
    v1Column17: TcxGridDBColumn;
    v1Column12: TcxGridDBColumn;
    cxGrid2Level1: TcxGridLevel;
    Label3: TLabel;
    Label4: TLabel;
    Label5: TLabel;
    Label8: TLabel;
    Label12: TLabel;
    Label6: TLabel;
    Label7: TLabel;
    SPName: TEdit;
    FactoryName: TEdit;
    SPID: TEdit;
    SPColor: TEdit;
    CRType: TComboBox;
    SPCF: TEdit;
    QCorderNo: TEdit;
    Label10: TLabel;
    CKorderNo: TEdit;
    Label11: TLabel;
    FromFactoryName: TEdit;
    Label13: TLabel;
    ToFactoryName: TEdit;
    v1Column20: TcxGridDBColumn;
    v1Column22: TcxGridDBColumn;
    FZSPID: TEdit;
    Label15: TLabel;
    procedure FormDestroy(Sender: TObject);
    procedure FormClose(Sender: TObject; var Action: TCloseAction);
    procedure FormCreate(Sender: TObject);
    procedure TBRafreshClick(Sender: TObject);
    procedure ConNoMChange(Sender: TObject);
    procedure TBCloseClick(Sender: TObject);
    procedure FormShow(Sender: TObject);
    procedure TBExportClick(Sender: TObject);
    procedure TBFindClick(Sender: TObject);
    procedure SPNameChange(Sender: TObject);
    procedure SPIDChange(Sender: TObject);
    procedure SPIDKeyPress(Sender: TObject; var Key: Char);
    procedure N1Click(Sender: TObject);
    procedure N2Click(Sender: TObject);
    procedure TBDelClick(Sender: TObject);
    procedure TBAddClick(Sender: TObject);
    procedure TBEditClick(Sender: TObject);
    procedure SPColorChange(Sender: TObject);
  private
    canshu1, canshu2: string;
    procedure InitGrid();
    { Private declarations }
  public
    { Public declarations }
  end;

var
  frmSXCKOutList: TfrmSXCKOutList;

implementation

uses
  U_DataLink, U_RTFun, U_SXCKOutPut, U_SXCKTHPut;

{$R *.dfm}

procedure TfrmSXCKOutList.FormDestroy(Sender: TObject);
begin
  frmSXCKOutList := nil;
end;

procedure TfrmSXCKOutList.FormClose(Sender: TObject; var Action: TCloseAction);
begin
  Action := caFree;
end;

procedure TfrmSXCKOutList.FormCreate(Sender: TObject);
begin
  //cxGrid1.Align:=alClient;
  canshu1 := Trim(DParameters1);
  canshu2 := Trim(DParameters2);
  EndDate.DateTime := SGetServerDate10(ADOQueryTemp);
  BegDate.DateTime := EndDate.DateTime - 30;
end;

procedure TfrmSXCKOutList.InitGrid();
begin
  try
    ADOQueryMain.DisableControls;
    with ADOQueryMain do
    begin
      Filtered := False;
      Close;
      sql.Clear;
      sql.Add(' select A.* ,B.SOrddefstr1,B.PRTColor,B.PRTHX');
    //  sql.Add(' rkNo=(select SPID from CK_SXPB_CR X where X.));
      sql.Add(' from CK_SXPB_CR A');
      sql.Add(' left join JYOrder_Sub B on A.ORDSubIdCK=B.SubId');
      sql.Add(' where A.CRTime>=:begdate and A.CRTime<:enddate');
      SQL.Add(' and CRFlag=''出库''  ');
      SQL.Add(' and isnull(CKName,'''')=''坯布'' ');
      Parameters.ParamByName('begdate').Value := Trim(FormatDateTime('yyyy-MM-dd', BegDate.DateTime));
      Parameters.ParamByName('enddate').Value := Trim(FormatDateTime('yyyy-MM-dd', enddate.DateTime + 1));
      Open;
      //ShowMessage(SQL.Text);
    end;
    SCreateCDS20(ADOQueryMain, CDS_Main);
    SInitCDSData20(ADOQueryMain, CDS_Main);
  finally
    ADOQueryMain.EnableControls;
  end;
end;

procedure TfrmSXCKOutList.TBRafreshClick(Sender: TObject);
begin
  BegDate.SetFocus;
  InitGrid();
end;

procedure TfrmSXCKOutList.ConNoMChange(Sender: TObject);
begin
  if ADOQueryMain.Active then
  begin
    SDofilter(ADOQueryMain, SGetFilters(Panel1, 1, 2));
  end;
end;

procedure TfrmSXCKOutList.TBCloseClick(Sender: TObject);
begin
  WriteCxGrid('坯布出库列表PMD', Tv1, '坯布仓库');
  Close;
end;

procedure TfrmSXCKOutList.FormShow(Sender: TObject);
begin
  if Trim(canshu2) = '查看' then
  begin
    TBAdd.Visible := False;
    TBDel.Visible := False;
    TBEdit.Visible := False;
  end
  else
  begin
    TBAdd.Visible := True;
    TBDel.Visible := True;
    TBEdit.Visible := True;
  end;
  ReadCxGrid('坯布出库列表PMD', Tv1, '坯布仓库');
  //InitGrid();
end;

procedure TfrmSXCKOutList.TBExportClick(Sender: TObject);
begin
  if ADOQueryMain.IsEmpty then
    exit;
  TcxGridToExcel('纱线出库列表', cxGrid2);
end;

procedure TfrmSXCKOutList.TBFindClick(Sender: TObject);
begin
  if ADOQueryMain.Active then
  begin
    SDofilter(ADOQueryMain, SGetFilters(Panel1, 1, 2));
    SCreateCDS20(ADOQueryMain, CDS_Main);
    SInitCDSData20(ADOQueryMain, CDS_Main);
  end;
end;

procedure TfrmSXCKOutList.SPNameChange(Sender: TObject);
begin
  TBFind.Click;
end;

procedure TfrmSXCKOutList.SPIDChange(Sender: TObject);
begin
  if Length(Trim(SPID.Text)) < 4 then
  begin
    if Trim(SPID.Text) <> '' then
      Exit;
  end;
  TBFind.Click;
end;

procedure TfrmSXCKOutList.SPIDKeyPress(Sender: TObject; var Key: Char);
begin
  if Key = #13 then
  begin
    {if Length(Trim(SPID.Text))<4 then Exit;
    try
      ADOQueryMain.DisableControls;
      with ADOQueryMain do
      begin
        Filtered:=False;
        Close;
        sql.Clear;
        sql.Add(' select A.* ');
        sql.Add(' from CK_SXPB_CR A');
        sql.add(' where SPID like :SXID');
        Parameters.ParamByName('SXID').Value:='%'+Trim(SPID.Text)+'%';
        Open;
        //ShowMessage(SQL.Text);
      end;
      SCreateCDS20(ADOQueryMain,CDS_Main);
      SInitCDSData20(ADOQueryMain,CDS_Main);
    finally
      ADOQueryMain.EnableControls;
    end; }
  end;
end;

procedure TfrmSXCKOutList.N1Click(Sender: TObject);
begin
  SelOKNo(CDS_Main, True);
end;

procedure TfrmSXCKOutList.N2Click(Sender: TObject);
begin
  SelOKNo(CDS_Main, False);
end;

procedure TfrmSXCKOutList.TBDelClick(Sender: TObject);
begin
  if CDS_Main.IsEmpty then
    Exit;
  if Trim(CDS_Main.fieldbyname('SPID').AsString) <> '' then
  begin
    if Trim(CDS_Main.fieldbyname('CRType').AsString) = '平移出库' then
    begin
      with ADOQueryTemp do
      begin
        Close;
        sql.Clear;
        sql.Add('select * from CK_SXPB_CR where FZSPID=');
        sql.Add('(select SPID from CK_SXPB_CR where PYID=''' + Trim(CDS_Main.fieldbyname('SPID').AsString) + '''');
        sql.Add(' and isnull(CRType,'''')=''平移入库'')');
        sql.Add(' and CRQtyFlag=-1');
        Open;
      end;
      if ADOQueryTemp.IsEmpty = False then
      begin
        Application.MessageBox('已有出库记录，不能删除!', '提示', 0);
        Exit;
      end;
    end;
    with ADOQueryTemp do
    begin
      Close;
      sql.Clear;
      sql.Add('select * from YF_Money_CR ');
      sql.Add(' where MainID=''' + Trim(CDS_Main.fieldbyname('SPID').AsString) + '''');
      sql.Add(' and status>=''1'' ');
      Open;
      if not IsEmpty then
      begin
        ADOQueryCmd.Connection.RollbackTrans;
        Application.MessageBox('应收款已审核，不能删除!', '提示', 0);
        Exit;
      end;
    end;
    if Application.MessageBox('确定要删除数据吗？', '提示', 32 + 4) <> IDYES then
      Exit;
    try
      ADOQueryCmd.Connection.BeginTrans;
      with ADOQueryCmd do
      begin
        Close;
        sql.Clear;
        sql.Add(' delete CK_SXPB_CR where SPID=''' + Trim(CDS_Main.fieldbyname('SPID').AsString) + '''');
        sql.Add(' Update CK_SXPB_CR Set MXKCQty=(select sum(isnull(Qty,0)*CRQtyFlag) from CK_SXPB_CR A where A.FZSPID=CK_SXPB_CR.SPID)');
        sql.Add(',MXKCPiQty=(select sum(isnull(PiQty,0)*CRQtyFlag) from CK_SXPB_CR A where A.FZSPID=CK_SXPB_CR.SPID)');
        sql.Add(',MXKCKGQty=(select sum(isnull(kgQty,0)*CRQtyFlag) from CK_SXPB_CR A where A.FZSPID=CK_SXPB_CR.SPID)');
        sql.Add(' where SPID=''' + Trim(CDS_Main.fieldbyname('FZSPID').AsString) + '''');
        if Trim(CDS_Main.fieldbyname('CRType').AsString) = '平移出库' then
        begin
          sql.Add(' delete CK_SXPB_CR where isnull(PYID,'''')=''' + Trim(CDS_Main.fieldbyname('PYID').AsString) + '''');
        end;
        if Trim(CDS_Main.fieldbyname('CRType').AsString) = '销售出库' then
        begin
          sql.Add('delete from YF_Money_CR  where mainID=''' + Trim(CDS_Main.fieldbyname('SPID').AsString) + '''');
        end;
        ExecSQL;
      end;
      ADOQueryCmd.Connection.CommitTrans;
    except
      ADOQueryCmd.Connection.RollbackTrans;
      Application.MessageBox('删除异常!', '提示', 0);
    end;
  end;
  CDS_Main.Delete;
end;

procedure TfrmSXCKOutList.TBAddClick(Sender: TObject);
begin
  try
    frmSXCKOutPut := TfrmSXCKOutPut.Create(Application);
    with frmSXCKOutPut do
    begin
      FBCId := '';
      if ShowModal = 1 then
      begin
        Self.InitGrid();
      end;
    end;
  finally
    frmSXCKOutPut.Free;
  end;
end;

procedure TfrmSXCKOutList.TBEditClick(Sender: TObject);
begin
  if CDS_Main.IsEmpty then
    Exit;
  with ADOQueryTemp do
  begin
    Close;
    sql.Clear;
    sql.Add('select * from CK_SXPB_CR where FZSPID=');
    sql.Add('(select SPID from CK_SXPB_CR where PYID=''' + Trim(CDS_Main.fieldbyname('SPID').AsString) + '''');
    sql.Add(' and isnull(CRType,'''')=''平移入库'')');
    sql.Add(' and CRQtyFlag=-1');
    Open;
  end;
  if ADOQueryTemp.IsEmpty = False then
  begin
    Application.MessageBox('已有出库记录，不能修改!', '提示', 0);
    Exit;
  end;                                        
  with ADOQueryTemp do
  begin
    Close;
    sql.Clear;
    sql.Add('select * from YF_Money_CR ');
    sql.Add(' where MainID=''' + Trim(CDS_Main.fieldbyname('SPID').AsString) + '''');
    sql.Add(' and status>=''1'' ');
    Open;
    if not IsEmpty then
    begin
      ADOQueryCmd.Connection.RollbackTrans;
      Application.MessageBox('应收款已审核，不能修改!', '提示', 0);
      Exit;
    end;
  end;

  try
    frmSXCKOutPut := TfrmSXCKOutPut.Create(Application);
    with frmSXCKOutPut do
    begin
      FBCId := Trim(CDS_Main.fieldbyname('SPID').AsString);
      TBDel.Visible := False;
      TBAdd.Visible := False;
      if ShowModal = 1 then
      begin
        Self.InitGrid();
      end;
    end;
  finally
    frmSXCKOutPut.Free;
  end;

end;

procedure TfrmSXCKOutList.SPColorChange(Sender: TObject);
begin
  TBFind.Click;
end;

end.