unit U_DJBCKOutList;

interface

uses
  Windows, Messages, SysUtils, Variants, Classes, Graphics, Controls, Forms,
  Dialogs, cxStyles, cxCustomData, cxGraphics, cxFilter, cxData,
  cxDataStorage, cxEdit, DB, cxDBData, cxGridCustomTableView,
  cxGridTableView, cxGridBandedTableView, cxGridDBBandedTableView,
  cxGridLevel, cxClasses, cxControls, cxGridCustomView, cxGridDBTableView,
  cxGrid, StdCtrls, ComCtrls, ExtCtrls, ToolWin, cxGridCustomPopupMenu,
  cxGridPopupMenu, ADODB, DBClient, cxDropDownEdit, cxCheckBox, RM_Common,
  RM_Class, RM_e_Xls, RM_Dataset, RM_System, RM_GridReport, Menus,
  cxCalendar, cxButtonEdit, cxTextEdit, RM_BarCode;

type
  TfrmDJBCKOutList = class(TForm)
    ToolBar1: TToolBar;
    TBRafresh: TToolButton;
    TBFind: TToolButton;
    TBExport: TToolButton;
    TBClose: TToolButton;
    Panel1: TPanel;
    ADOQueryCmd: TADOQuery;
    ADOQueryMain: TADOQuery;
    ADOQueryTemp: TADOQuery;
    DataSource1: TDataSource;
    cxGridPopupMenu1: TcxGridPopupMenu;
    Label1: TLabel;
    Label2: TLabel;
    BegDate: TDateTimePicker;
    EndDate: TDateTimePicker;
    CDS_Main: TClientDataSet;
    RMDBMain: TRMDBDataSet;
    RMXLSExport1: TRMXLSExport;
    RMDBHZ: TRMDBDataSet;
    CDS_HZ: TClientDataSet;
    CDS_PRT: TClientDataSet;
    TBDel: TToolButton;
    PopupMenu1: TPopupMenu;
    N1: TMenuItem;
    N2: TMenuItem;
    TBAdd: TToolButton;
    TBEdit: TToolButton;
    cxGrid2: TcxGrid;
    Tv1: TcxGridDBTableView;
    v1Column6: TcxGridDBColumn;
    v1Column2: TcxGridDBColumn;
    v1Column4: TcxGridDBColumn;
    v1Column14: TcxGridDBColumn;
    v2Column1: TcxGridDBColumn;
    v1Column8: TcxGridDBColumn;
    v1Column7: TcxGridDBColumn;
    v1Column1: TcxGridDBColumn;
    v1Column10: TcxGridDBColumn;
    v1Column9: TcxGridDBColumn;
    v2Column6: TcxGridDBColumn;
    v1Column3: TcxGridDBColumn;
    v1Column19: TcxGridDBColumn;
    v1Column17: TcxGridDBColumn;
    v1Column12: TcxGridDBColumn;
    cxGrid2Level1: TcxGridLevel;
    Label3: TLabel;
    Label4: TLabel;
    Label5: TLabel;
    Label8: TLabel;
    Label12: TLabel;
    Label6: TLabel;
    Label7: TLabel;
    SPName: TEdit;
    FactoryName: TEdit;
    SPID: TEdit;
    SPSpec: TEdit;
    CRType: TComboBox;
    SPCF: TEdit;
    QCorderNo: TEdit;
    Label10: TLabel;
    CKorderNo: TEdit;
    Label11: TLabel;
    FromFactoryName: TEdit;
    Label13: TLabel;
    ToFactoryName: TEdit;
    Label9: TLabel;
    Label14: TLabel;
    RCGangNo: TEdit;
    GangNo: TEdit;
    v1Column15: TcxGridDBColumn;
    v1Column20: TcxGridDBColumn;
    ToolButton3: TToolButton;
    ADOQueryPrint: TADOQuery;
    v1Column21: TcxGridDBColumn;
    Label15: TLabel;
    SPColor: TEdit;
    Label16: TLabel;
    SOrddefstr1: TEdit;
    Label17: TLabel;
    SPHX: TEdit;
    RM1: TRMGridReport;
    RMBarCodeObject1: TRMBarCodeObject;
    v1Column22: TcxGridDBColumn;
    v1Column23: TcxGridDBColumn;
    Filler: TEdit;
    Label18: TLabel;
    procedure FormDestroy(Sender: TObject);
    procedure FormClose(Sender: TObject; var Action: TCloseAction);
    procedure FormCreate(Sender: TObject);
    procedure TBRafreshClick(Sender: TObject);
    procedure ConNoMChange(Sender: TObject);
    procedure TBCloseClick(Sender: TObject);
    procedure FormShow(Sender: TObject);
    procedure TBExportClick(Sender: TObject);
    procedure TBFindClick(Sender: TObject);
    procedure SPNameChange(Sender: TObject);
    procedure SPIDKeyPress(Sender: TObject; var Key: Char);
    procedure N1Click(Sender: TObject);
    procedure N2Click(Sender: TObject);
    procedure TBDelClick(Sender: TObject);
    procedure TBAddClick(Sender: TObject);
    procedure TBEditClick(Sender: TObject);
    procedure ToolButton3Click(Sender: TObject);
    procedure Tv1MouseDown(Sender: TObject; Button: TMouseButton;
      Shift: TShiftState; X, Y: Integer);
  private
    canshu1,canshu2:string;
    procedure InitGrid();
    { Private declarations }
  public
    fckName:string;
    { Public declarations }
  end;

var
  frmDJBCKOutList: TfrmDJBCKOutList;

implementation
uses
  U_DataLink,U_RTFun,U_DJBCKOutPut;

{$R *.dfm}

procedure TfrmDJBCKOutList.FormDestroy(Sender: TObject);
begin
  frmDJBCKOutList:=nil;
end;

procedure TfrmDJBCKOutList.FormClose(Sender: TObject;
  var Action: TCloseAction);
begin
  Action:=caFree;
end;

procedure TfrmDJBCKOutList.FormCreate(Sender: TObject);
begin
  //cxGrid1.Align:=alClient;
  canshu1:=Trim(DParameters1);
  canshu2:=Trim(DParameters2);
  EndDate.DateTime:=SGetServerDate10(ADOQueryTemp);
  BegDate.DateTime:=EndDate.DateTime-30;
end;

procedure TfrmDJBCKOutList.InitGrid();
begin
  try
    ADOQueryMain.DisableControls;
    with ADOQueryMain do
    begin
      Filtered:=False;
      Close;
      sql.Clear;
      sql.Add(' select A.* ');
      sql.Add(' from CK_SXPB_CR A');
      sql.add(' where A.CRTime>='''+Trim(FormatDateTime('yyyy-MM-dd',BegDate.DateTime))+'''');
      sql.Add(' and A.CRTime<'''+Trim(FormatDateTime('yyyy-MM-dd',enddate.DateTime+1))+'''');
      SQL.Add(' and A.CRFlag=''出库''  ');
      SQL.Add(' and isnull(A.CKName,'''')='''+trim(fckName)+''' ');

      Open;
      //ShowMessage(SQL.Text);
    end;
    SCreateCDS20(ADOQueryMain,CDS_Main);
    SInitCDSData20(ADOQueryMain,CDS_Main);
  finally
    ADOQueryMain.EnableControls;
  end;
end;

procedure TfrmDJBCKOutList.TBRafreshClick(Sender: TObject);
begin
  BegDate.SetFocus;
  InitGrid();
end;

procedure TfrmDJBCKOutList.ConNoMChange(Sender: TObject);
begin
  if ADOQueryMain.Active then
  begin
    SDofilter(ADOQueryMain,SGetFilters(Panel1,1,2));
  end;
end;

procedure TfrmDJBCKOutList.TBCloseClick(Sender: TObject);
begin
  WriteCxGrid('外加工出库列表PMD',Tv1,'外加工仓库');
  Close;
end;

procedure TfrmDJBCKOutList.FormShow(Sender: TObject);
begin
  if Trim(canshu2)='查看' then
  begin
    TBAdd.Visible:=False;
    TBDel.Visible:=False;
    TBEdit.Visible:=False;
  end else
  begin
    TBAdd.Visible:=True;
    TBDel.Visible:=True;
    TBEdit.Visible:=True;
  end;
  ReadCxGrid('外加工出库列表PMD',Tv1,'外加工仓库');
  //InitGrid();
end;

procedure TfrmDJBCKOutList.TBExportClick(Sender: TObject);
begin
  if ADOQueryMain.IsEmpty then exit;
  TcxGridToExcel('外加工出库列表',cxGrid2);
end;

procedure TfrmDJBCKOutList.TBFindClick(Sender: TObject);
begin
  if ADOQueryMain.Active then
  begin
    SDofilter(ADOQueryMain,SGetFilters(Panel1,1,2));
    SCreateCDS20(ADOQueryMain,CDS_Main);
    SInitCDSData20(ADOQueryMain,CDS_Main);
  end;
end;

procedure TfrmDJBCKOutList.SPNameChange(Sender: TObject);
begin
  TBFind.Click;
end;

procedure TfrmDJBCKOutList.SPIDKeyPress(Sender: TObject;
  var Key: Char);
begin
  if Key=#13 then
  begin
    {if Length(Trim(SPID.Text))<4 then Exit;
    try
      ADOQueryMain.DisableControls;
      with ADOQueryMain do
      begin
        Filtered:=False;
        Close;
        sql.Clear;
        sql.Add(' select A.* ');
        sql.Add(' from CK_SXPB_CR A');
        sql.add(' where SPID like :SXID');
        Parameters.ParamByName('SXID').Value:='%'+Trim(SXID.Text)+'%';
        Open;
        //ShowMessage(SQL.Text);
      end;
      SCreateCDS20(ADOQueryMain,CDS_Main);
      SInitCDSData20(ADOQueryMain,CDS_Main);
    finally
      ADOQueryMain.EnableControls;
    end; }
  end;
end;

procedure TfrmDJBCKOutList.N1Click(Sender: TObject);
begin
  if CDS_Main.IsEmpty then Exit;
  CDS_Main.DisableControls;
  with CDS_Main do
  begin
    First;
    while not eof do
    begin
      if Trim(CDS_Main.fieldbyname('CRType').AsString)='检验出库' then
      begin
        Edit;
        FieldByName('SSel').Value:=True;
        Post;
      end;
      Next;
    end;
  end;
  CDS_Main.EnableControls;
end;

procedure TfrmDJBCKOutList.N2Click(Sender: TObject);
begin
  SelOKNo(CDS_Main,False);
end;

procedure TfrmDJBCKOutList.TBDelClick(Sender: TObject);
begin
  if CDS_Main.IsEmpty then Exit;
  if Trim(CDS_Main.fieldbyname('SPID').AsString)<>'' then
  begin
    with ADOQueryTemp do
    begin
      Close;
      sql.Clear;
      sql.Add('select Top 1 * from WFB_MJJY where isnull(APID,'''')='''+Trim(CDS_Main.fieldbyname('SPID').AsString)+'''');
      Open;
    end;
    if ADOQueryTemp.IsEmpty=False then
    begin
      Application.MessageBox('已检验不能删除数据!','提示',0);
      Exit;
    end;
    if Trim(CDS_Main.fieldbyname('CRType').AsString)='平移出库' then
    begin
      with ADOQueryTemp do
      begin
        Close;
        sql.Clear;
        sql.Add('select * from CK_SXPB_CR where FZSPID=');
        sql.Add('(select SPID from CK_SXPB_CR where PYID='''+Trim(CDS_Main.fieldbyname('SPID').AsString)+'''');
        sql.Add(' and isnull(CRType,'''')=''平移入库'')');
        sql.Add(' and CRQtyFlag=-1');
        Open;
      end;
      if ADOQueryTemp.IsEmpty=False then
      begin
        Application.MessageBox('已有出库记录，不能删除!','提示',0);
        Exit;
      end;
    end;

    if Application.MessageBox('确定要删除数据吗？','提示',32+4)<>IDYES then Exit;
    try
      ADOQueryCmd.Connection.BeginTrans;
      with ADOQueryCmd do
      begin
        Close;
        sql.Clear;
        sql.Add(' delete CK_SXPB_CR where SPID='''+Trim(CDS_Main.fieldbyname('SPID').AsString)+'''');
        sql.Add(' Update CK_SXPB_CR Set MXKCQty=(select sum(isnull(Qty,0)*CRQtyFlag) from CK_SXPB_CR A where A.FZSPID=CK_SXPB_CR.SPID)');
        sql.Add(',MXKCPiQty=(select sum(isnull(PiQty,0)*CRQtyFlag) from CK_SXPB_CR A where A.FZSPID=CK_SXPB_CR.SPID)');
        sql.Add(' where SPID='''+Trim(CDS_Main.fieldbyname('FZSPID').AsString)+'''');
        if Trim(CDS_Main.fieldbyname('CRType').AsString)='平移出库' then
        begin
          sql.Add(' delete CK_SXPB_CR where isnull(PYID,'''')='''+Trim(CDS_Main.fieldbyname('PYID').AsString)+'''');
        end;
        ExecSQL;
      end;
      ADOQueryCmd.Connection.CommitTrans;
    except
      ADOQueryCmd.Connection.RollbackTrans;
      Application.MessageBox('删除异常!','提示',0);
    end;
  end;
  CDS_Main.Delete;
end;

procedure TfrmDJBCKOutList.TBAddClick(Sender: TObject);
begin
  try
    frmDJBCKOutPut:=TfrmDJBCKOutPut.Create(Application);
    with frmDJBCKOutPut do
    begin
      FBCId:='';
      fckName:=self.fckName;
      if ShowModal=1 then
      begin
        Self.InitGrid();
      end;
    end;
  finally
    frmDJBCKOutPut.Free;
  end;
end;

procedure TfrmDJBCKOutList.TBEditClick(Sender: TObject);
begin
  if CDS_Main.IsEmpty then Exit;
  with ADOQueryTemp do
  begin
    Close;
    sql.Clear;
    sql.Add('select * from CK_SXPB_CR where FZSPID=');
    sql.Add('(select SPID from CK_SXPB_CR where PYID='''+Trim(CDS_Main.fieldbyname('SPID').AsString)+'''');
    sql.Add(' and isnull(CRType,'''')=''平移入库'')');
    sql.Add(' and CRQtyFlag=-1');
    Open;
  end;
  if ADOQueryTemp.IsEmpty=False then
  begin
    Application.MessageBox('已有出库记录，不能修改!','提示',0);
    Exit;
  end;
  try
    frmDJBCKOutPut:=TfrmDJBCKOutPut.Create(Application);
    with frmDJBCKOutPut do
    begin
      FBCId:=Trim(CDS_Main.fieldbyname('SPID').AsString);
      TBDel.Visible:=False;
      TBAdd.Visible:=False;
      fckName:=self.fckName;
      if ShowModal=1 then
      begin
        Self.InitGrid();
      end;
    end;
  finally
    frmDJBCKOutPut.Free;
  end;

end;

procedure TfrmDJBCKOutList.ToolButton3Click(Sender: TObject);
var
   fPrintFile:string;
   Txt,fImagePath:string;
   Moudle: THandle;
   Makebar:TMakebar;
   Mixtext:TMixtext;

begin
  if CDS_Main.IsEmpty then Exit;
  //if Trim(CDS_Main.fieldbyname('CRType').AsString)<>'检验出库' then Exit;
  if CDS_Main.Locate('SSel',True,[])=False then
  begin
    Application.MessageBox('没有选择数据!','提示',0);
    Exit;
  end;
  fPrintFile:= ExtractFilePath(Application.ExeName) + 'Report\检验指示单标签.rmf' ;
  CDS_Main.DisableControls;
  with CDS_Main do
  begin
    First;
    while CDS_Main.Locate('SSel',True,[]) do
    begin
      with ADOQueryPrint do
      begin
        Close;
        sql.Clear;
        sql.Add(' select A.* ');
        sql.Add(' from CK_SXPB_CR A');
        sql.Add(' where A.SPId='''+Trim(CDS_Main.fieldbyname('SPId').AsString)+'''');
        Open;
      end;
      SCreateCDS20(ADOQueryPrint,CDS_PRT);
      SInitCDSData20(ADOQueryPrint,CDS_PRT);
      try
        Moudle:=LoadLibrary('MakeQRBarcode.dll');
        @Makebar:=GetProcAddress(Moudle,'Make');
        @Mixtext:=GetProcAddress(Moudle,'MixText');
        Txt:=Trim(CDS_PRT.fieldbyname('SPID').AsString);
        fImagePath:=ExtractFilePath(Application.ExeName)+'image\temp.bmp' ;
        if not DirectoryExists(pchar(ExtractFilePath(Application.ExeName)+'image')) then
            CreateDirectory(pchar(ExtractFilePath(Application.ExeName)+'image'),nil);
        if FileExists(fImagePath) then DeleteFile(fImagePath);
        Makebar(pchar(Txt),Length(Txt),3,3,0,PChar(fImagePath),3);
      except
        CDS_Main.EnableControls;
        application.MessageBox('条形码生成失败！','提示信息',MB_ICONERROR);
        exit;
      end;

      if FileExists(fPrintFile) then
      begin
        RMVariables['QRBARCODE']:=fImagePath;
        RM1.LoadFromFile(fPrintFile);
        //RM1.ShowReport;
        RM1.PrintReport;
      end else
      begin
        CDS_Main.EnableControls;
        Application.MessageBox(PChar('没有找'+ExtractFilePath(Application.ExeName)+'Report\检验指示单标签.rmf'),'提示',0);
        Exit;
      end;
      Edit;
      FieldByName('SSel').Value:=False;
      Post;
    end;
  end;
  CDS_Main.EnableControls;

end;

procedure TfrmDJBCKOutList.Tv1MouseDown(Sender: TObject;
  Button: TMouseButton; Shift: TShiftState; X, Y: Integer);
begin
  if CDS_Main.IsEmpty then Exit;
  if Trim(CDS_Main.fieldbyname('CRType').AsString)<>'检验出库' then
  begin
    Tv1.OptionsSelection.CellSelect:=False;
  end else
  begin
    Tv1.OptionsSelection.CellSelect:=True;
  end;
end;

end.