unit U_TatPlanInPut;

interface

uses
  Windows, Messages, SysUtils, Variants, Classes, Graphics, Controls, Forms,
  Dialogs, cxStyles, cxCustomData, cxGraphics, cxFilter, cxData, cxDataStorage,
  cxEdit, DB, cxDBData, cxGridLevel, cxGridCustomTableView, cxGridTableView,
  cxGridDBTableView, cxClasses, cxControls, cxGridCustomView, cxGrid, cxMemo,
  cxRichEdit, ComCtrls, cxContainer, cxTextEdit, cxMaskEdit, cxButtonEdit,
  StdCtrls, ToolWin, DBClient, ADODB, ExtCtrls, BtnEdit, cxDropDownEdit,
  StrUtils, cxPC, ShellAPI, cxCalendar, Math, cxLookAndFeels,
  cxLookAndFeelPainters, dxBarBuiltInMenu, cxNavigator, dxDateRanges,
  U_BaseInput, System.ImageList, Vcl.ImgList, Vcl.Menus, cxCheckBox, dxCore,
  cxDateUtils, dxScrollbarAnnotations, cxGridCustomPopupMenu, cxGridPopupMenu,
  dxCoreClasses, dxHashUtils, dxSpreadSheetCore, dxSpreadSheetCoreFormulas,
  dxSpreadSheetCoreHistory, dxSpreadSheetCoreStyles, dxSpreadSheetCoreStrs,
  dxSpreadSheetConditionalFormatting, dxSpreadSheetConditionalFormattingRules,
  dxSpreadSheetClasses, dxSpreadSheetContainers, dxSpreadSheetFormulas,
  dxSpreadSheetHyperlinks, dxSpreadSheetFunctions, dxSpreadSheetStyles,
  dxSpreadSheetGraphics, dxSpreadSheetPrinting, dxSpreadSheetTypes,
  dxSpreadSheetUtils, dxSpreadSheetFormattedTextUtils, dxSpreadSheet,
  dxSkinsCore, dxSkinsDefaultPainters, cxImageList, dxSkinBasic, dxSkinBlack,
  dxSkinBlue, dxSkinBlueprint, dxSkinCaramel, dxSkinCoffee, dxSkinDarkroom,
  dxSkinDarkSide, dxSkinDevExpressDarkStyle, dxSkinDevExpressStyle, dxSkinFoggy,
  dxSkinGlassOceans, dxSkinHighContrast, dxSkiniMaginary, dxSkinLilian,
  dxSkinLiquidSky, dxSkinLondonLiquidSky, dxSkinMcSkin, dxSkinMetropolis,
  dxSkinMetropolisDark, dxSkinMoneyTwins, dxSkinOffice2007Black,
  dxSkinOffice2007Blue, dxSkinOffice2007Green, dxSkinOffice2007Pink,
  dxSkinOffice2007Silver, dxSkinOffice2010Black, dxSkinOffice2010Blue,
  dxSkinOffice2010Silver, dxSkinOffice2013DarkGray, dxSkinOffice2013LightGray,
  dxSkinOffice2013White, dxSkinOffice2016Colorful, dxSkinOffice2016Dark,
  dxSkinOffice2019Black, dxSkinOffice2019Colorful, dxSkinOffice2019DarkGray,
  dxSkinOffice2019White, dxSkinPumpkin, dxSkinSeven, dxSkinSevenClassic,
  dxSkinSharp, dxSkinSharpPlus, dxSkinSilver, dxSkinSpringtime, dxSkinStardust,
  dxSkinSummer2008, dxSkinTheAsphaltWorld, dxSkinTheBezier, dxSkinValentine,
  dxSkinVisualStudio2013Blue, dxSkinVisualStudio2013Dark,
  dxSkinVisualStudio2013Light, dxSkinVS2010, dxSkinWhiteprint, dxSkinWXI,
  dxSkinXmas2008Blue;

type
  TfrmTatPlanInPut = class(TfrmBaseInput)
    ToolBar1: TToolBar;
    TBSave: TToolButton;
    TBClose: TToolButton;
    ScrollBox1: TScrollBox;
    Label2: TLabel;
    Label3: TLabel;
    Label14: TLabel;
    ADOQueryTemp: TADOQuery;
    ADOQueryCmd: TADOQuery;
    Label5: TLabel;
    Label8: TLabel;
    Label12: TLabel;
    OrdPieceLen: TcxTextEdit;
    OrdPiece: TcxTextEdit;
    Label13: TLabel;
    OrdQty: TcxTextEdit;
    CDS_2: TClientDataSet;
    DS_1: TDataSource;
    CDS_1: TClientDataSet;
    DS_2: TDataSource;
    Label26: TLabel;
    Label31: TLabel;
    Label47: TLabel;
    C_Name: TcxTextEdit;
    Label43: TLabel;
    lbl2: TLabel;
    Saleser: TcxTextEdit;
    Label7: TLabel;
    OrderNo: TcxTextEdit;
    Label4: TLabel;
    ToolButton8: TToolButton;
    Label35: TLabel;
    ConMId: TcxTextEdit;
    ConSId: TcxTextEdit;
    cxPageControl3: TcxPageControl;
    cxTabSheet1: TcxTabSheet;
    GroupBox1: TGroupBox;
    Y_Note_PLJ: TMemo;
    cxTabSheet2: TcxTabSheet;
    GroupBox2: TGroupBox;
    Y_Note_PLW: TMemo;
    cxTabSheet3: TcxTabSheet;
    cxGrid4: TcxGrid;
    TV4: TcxGridDBTableView;
    TV4Column1: TcxGridDBColumn;
    cxGridDBColumn16: TcxGridDBColumn;
    cxGridDBColumn17: TcxGridDBColumn;
    cxGridLevel5: TcxGridLevel;
    Panel1: TPanel;
    cxPageControl2: TcxPageControl;
    Panel2: TPanel;
    cxPageControl1: TcxPageControl;
    DS_QZ: TDataSource;
    CDS_QZ: TClientDataSet;
    ThroughHealdOrder: TcxMemo;
    C_FinishLatitudeDensity: TcxTextEdit;
    C_TestGramWeight: TcxTextEdit;
    C_GramWeight: TcxTextEdit;
    C_ReedNo: TcxTextEdit;
    C_ReedWidth: TcxTextEdit;
    C_YarnQty: TcxTextEdit;
    LoomType: TcxTextEdit;
    OrdNote: TcxMemo;
    Label10: TLabel;
    Label9: TLabel;
    Label6: TLabel;
    Label11: TLabel;
    Label15: TLabel;
    Label16: TLabel;
    Label17: TLabel;
    Label55: TLabel;
    Label18: TLabel;
    OurCoName: TcxButtonEdit;
    FtyCoName: TcxButtonEdit;
    OrdType: TcxComboBox;
    DlyDate: TcxDateEdit;
    OrdDate: TcxDateEdit;
    ConNo: TcxButtonEdit;
    CustName: TcxButtonEdit;
    C_Spec: TcxMemo;
    C_Code: TcxButtonEdit;
    cxGrid1: TcxGrid;
    TV1: TcxGridDBTableView;
    TV1Column7: TcxGridDBColumn;
    cxGridDBColumn3: TcxGridDBColumn;
    cxGridDBColumn4: TcxGridDBColumn;
    cxGridDBColumn5: TcxGridDBColumn;
    cxGridDBColumn8: TcxGridDBColumn;
    TV1Column1: TcxGridDBColumn;
    TV1Column2: TcxGridDBColumn;
    TV1Column3: TcxGridDBColumn;
    TV1Column4: TcxGridDBColumn;
    TV1Column5: TcxGridDBColumn;
    TV1Column10: TcxGridDBColumn;
    TV1Column6: TcxGridDBColumn;
    TV1Column8: TcxGridDBColumn;
    TV1Column9: TcxGridDBColumn;
    cxGridLevel2: TcxGridLevel;
    cxGrid2: TcxGrid;
    Tv2: TcxGridDBTableView;
    Tv2Column7: TcxGridDBColumn;
    v2Column10: TcxGridDBColumn;
    cxGridDBColumn1: TcxGridDBColumn;
    v2Column2: TcxGridDBColumn;
    v2Column6: TcxGridDBColumn;
    Tv2Column1: TcxGridDBColumn;
    Tv2Column2: TcxGridDBColumn;
    Tv2Column3: TcxGridDBColumn;
    Tv2Column4: TcxGridDBColumn;
    Tv2Column5: TcxGridDBColumn;
    Tv2Column10: TcxGridDBColumn;
    Tv2Column6: TcxGridDBColumn;
    Tv2Column8: TcxGridDBColumn;
    Tv2Column9: TcxGridDBColumn;
    cxGridLevel1: TcxGridLevel;
    GPM_1: TcxGridPopupMenu;
    GPM_2: TcxGridPopupMenu;
    cxTabSheet4: TcxTabSheet;
    CZF: TMemo;
    cxTabSheet5: TcxTabSheet;
    CKF: TMemo;
    TV1Column11: TcxGridDBColumn;
    TV1Column12: TcxGridDBColumn;
    Tv2Column11: TcxGridDBColumn;
    Tv2Column12: TcxGridDBColumn;
    Label1: TLabel;
    PBQty: TcxTextEdit;
    Label19: TLabel;
    DDQty: TcxTextEdit;
    Label20: TLabel;
    C_Width: TcxTextEdit;
    Label21: TLabel;
    C_FinishWidth: TcxTextEdit;
    Label22: TLabel;
    BBNo: TcxTextEdit;
    Label23: TLabel;
    C_Color: TcxTextEdit;
    QZF: TMemo;
    procedure TBCloseClick(Sender: TObject);
    procedure FormShow(Sender: TObject);
    procedure TBSaveClick(Sender: TObject);
    procedure cxGridDBColumn1PropertiesButtonClick(Sender: TObject; AButtonIndex: Integer);
    procedure v2Column11PropertiesButtonClick(Sender: TObject; AButtonIndex: Integer);
    procedure OrdPieceLenChange(Sender: TObject);
    procedure OrdPieceChange(Sender: TObject);
    procedure C_CodeKeyPress(Sender: TObject; var Key: Char);
    procedure ConNoKeyPress(Sender: TObject; var Key: Char);
    procedure MCTypeBtnUpClick(Sender: TObject);
    procedure cxGridDBColumn4PropertiesButtonClick(Sender: TObject; AButtonIndex: Integer);
    procedure Edit1KeyPress(Sender: TObject; var Key: Char);
    procedure ToolButton7Click(Sender: TObject);
    procedure ToolButton9Click(Sender: TObject);
    procedure FormCreate(Sender: TObject);
    procedure OurCoNamePropertiesButtonClick(Sender: TObject; AButtonIndex: Integer);
    procedure OurCoNameDblClick(Sender: TObject);
    procedure FtyCoNamePropertiesButtonClick(Sender: TObject; AButtonIndex: Integer);
    procedure CustNamePropertiesButtonClick(Sender: TObject; AButtonIndex: Integer);
    procedure C_CodePropertiesButtonClick(Sender: TObject; AButtonIndex: Integer);
    procedure ConNoPropertiesButtonClick(Sender: TObject; AButtonIndex: Integer);
    procedure ToolButton8Click(Sender: TObject);
    procedure OrdPiecePropertiesEditValueChanged(Sender: TObject);
  private
    FXS, FGridFlag: Integer;
    procedure InitData();
    procedure Initexcel();
    procedure CALCYarnQty();
    function SaveData(): Boolean;
    procedure InitClothYarn(MC_Code: string);
    { Private declarations }
  public
    PState, FCopyInt: Integer;
    FConNo, FMainId, FSubId: string;
    { Public declarations }
  end;

var
  frmTatPlanInPut: TfrmTatPlanInPut;
  newh: hwnd;

implementation

uses
  U_DataLink, U_ZDYHelp, U_RTFun, U_TatClothInfoSel, U_CompanySel, U_YarnInfoSel,
  U_TradeSalesContractSel;

{$R *.dfm}
procedure TfrmTatPlanInPut.InitClothYarn(MC_Code: string);
begin

  with ADOQueryTemp do
  begin
    Close;
    sql.Clear;
    sql.Add('select A.* from Bs_Cloth_Info A');
    sql.Add(' where  A.C_Code=''' + Trim(MC_Code) + '''');
    Open;
  end;
  Self.C_Code.Text := ADOQueryTemp.fieldbyname('C_Code').AsString;
  Self.C_Name.Text := ADOQueryTemp.fieldbyname('C_Name').AsString;
  Self.C_Spec.Text := ADOQueryTemp.fieldbyname('C_Spec').AsString;
  Self.C_FinishLatitudeDensity.Text := ADOQueryTemp.fieldbyname('C_FinishLatitudeDensity').AsString;

  Self.C_GramWeight.Text := ADOQueryTemp.fieldbyname('C_GramWeight').AsString;
  Self.C_ReedNo.Text := ADOQueryTemp.fieldbyname('C_ReedNo').AsString;
  Self.C_YarnQty.Text := ADOQueryTemp.fieldbyname('C_YarnQty').AsString;
  Self.C_TestGramWeight.Text := ADOQueryTemp.fieldbyname('C_TestGramWeight').AsString;
  Self.LoomType.Text := ADOQueryTemp.fieldbyname('LoomType').AsString;
  Self.C_ReedWidth.Text := ADOQueryTemp.fieldbyname('C_ReedWidth').AsString;
  Self.BBNO.Text := ADOQueryTemp.fieldbyname('BBNO').AsString;
  Self.C_Color.Text := ADOQueryTemp.fieldbyname('C_Color').AsString;

  Self.QZF.Text := ADOQueryTemp.fieldbyname('QZF').AsString;
  Self.CZF.Text := ADOQueryTemp.fieldbyname('CZF').AsString;
  Self.CKF.Text := ADOQueryTemp.fieldbyname('CKF').AsString;
  Self.Y_Note_PLJ.Text := ADOQueryTemp.fieldbyname('Y_Note_PLJ').AsString;
  Self.Y_Note_PLW.Text := ADOQueryTemp.fieldbyname('Y_Note_PLW').AsString;
  with ADOQueryTemp do
  begin
    Close;
    sql.Clear;
    sql.Add('select A.*,MainId=cast('''' as varchar(30)),SubId=cast('''' as varchar(30)) from BS_Cloth_Yarn A inner join Bs_Cloth_Info B on A.BCIID=B.BCIID');
    sql.Add(' where A.YRType=''经丝'' and B.C_Code=''' + Trim(MC_Code) + '''');
    Open;
  end;
  SCreateCDS(ADOQueryTemp, CDS_1);
  SInitCDSData(ADOQueryTemp, CDS_1);
  ClearCDSColumn(CDS_1, ['YRId', 'SubId', 'MainId']);

  with ADOQueryTemp do
  begin
    Close;
    sql.Clear;
    sql.Add('select A.*,MainId=cast('''' as varchar(30)),SubId=cast('''' as varchar(30))   from BS_Cloth_Yarn A inner join Bs_Cloth_Info B on A.BCIID=B.BCIID');
    sql.Add(' where A.YRType=''纬丝'' and B.C_Code=''' + Trim(MC_Code) + '''');
    Open;
  end;
  SCreateCDS(ADOQueryTemp, CDS_2);
  SInitCDSData(ADOQueryTemp, CDS_2);
  ClearCDSColumn(CDS_2, ['YRId', 'SubId', 'MainId']);

  with ADOQueryTemp do
  begin
    Close;
    sql.Clear;
    sql.Add('select A.*,MainId=cast('''' as varchar(30)),SubId=cast('''' as varchar(30))   from BS_Cloth_QZ A inner join Bs_Cloth_Info B on A.BCIID=B.BCIID');
    sql.Add(' where B.C_Code=''' + Trim(MC_Code) + '''');
    Open;
  end;
  SCreateCDS(ADOQueryTemp, CDS_QZ);
  SInitCDSData(ADOQueryTemp, CDS_QZ);
  ClearCDSColumn(CDS_QZ, ['QZID', 'SubId', 'MainId']);

end;

procedure TfrmTatPlanInPut.CALCYarnQty();
var
  MYarnQty, MOrdQty, MWidth, MMachLatitudeDensity: Double;
begin
//  MYarnQty := STRTOFLOATDEF(C_YarnQty.Text, 0);
//  MOrdQty := STRTOFLOATDEF(OrdQty.Text, 0);
//  MWidth := STRTOFLOATDEF(StringReplace(C_Width.Text, 'CM', '', [rfReplaceAll, rfIgnoreCase]), 0);
//  MMachLatitudeDensity := STRTOFLOATDEF(C_MachLatitudeDensity.Text, 0);
//  with CDS_1 do
//  begin
//    DisableControls;
//    First;
//    while not Eof do
//    begin
//      Edit;
//      FieldByName('Y_Qty').Value := MYarnQty * MOrdQty * FieldByName('Y_Ratio').AsFloat / 100 / 9000 * FieldByName('Denier').AsFloat / 1000;
//      Next;
//    end;
//    EnableControls;
//  end;
//
//  with CDS_2 do
//  begin
//    DisableControls;
//    First;
//    while not Eof do
//    begin
//      Edit;
//      FieldByName('Y_Qty').Value := MMachLatitudeDensity * MOrdQty * MWidth * FieldByName('Y_Ratio').AsFloat / 100 / 9000 * FieldByName('Denier').AsFloat / 1000;
//      Next;
//    end;
//    EnableControls;
//  end;

end;

procedure TfrmTatPlanInPut.TBCloseClick(Sender: TObject);
begin
  ModalResult := 1;
end;

procedure TfrmTatPlanInPut.InitData();
var
  PBNO, PBFlag: string;
begin
  if PState = 1 then
  begin
    ConNo.enabled := false;
  end;

  with ADOQueryTemp do
  begin
    Close;
    SQL.Clear;
    sql.Add('select * from Tat_Plan_Main A where A.MainId=''' + Trim(FMainId) + '''');
    Open;
  end;
  SCSHData(ADOQueryTemp, ScrollBox1, 0);

//  QZF.Text := Trim(ADOQueryTemp.FieldByName('QZF').AsString);
  CZF.Text := Trim(ADOQueryTemp.FieldByName('CZF').AsString);
  CKF.Text := Trim(ADOQueryTemp.FieldByName('CKF').AsString);

  with ADOQueryTemp do
  begin
    Close;
    SQL.Clear;
    sql.Add('select * from Tat_Plan_Sub A where A.MainId=''' + Trim(FMainId) + '''');
    Open;
  end;
  SCSHData(ADOQueryTemp, ScrollBox1, 2);
  Y_Note_PLJ.Text := ADOQueryTemp.FieldByName('Y_Note_PLJ').AsString;

  Y_Note_PLW.Text := ADOQueryTemp.FieldByName('Y_Note_PLW').AsString;
  with ADOQueryTemp do
  begin
    Close;
    sql.Clear;
    sql.Add('select A.*  from Tat_Plan_Yarn A ');
    sql.Add(' where YRType=''经丝'' and A.MainId=''' + Trim(FMainId) + '''');
    Open;
  end;
  SCreateCDS(ADOQueryTemp, CDS_1);
  SInitCDSData(ADOQueryTemp, CDS_1);
  with ADOQueryTemp do
  begin
    Close;
    sql.Clear;
    sql.Add('select A.*  from Tat_Plan_Yarn A ');
    sql.Add(' where YRType=''纬丝'' and A.MainId=''' + Trim(FMainId) + '''');
    Open;
  end;
  SCreateCDS(ADOQueryTemp, CDS_2);
  SInitCDSData(ADOQueryTemp, CDS_2);

    /////////////////刷新起综工艺单信息/////////////////////////
  with ADOQueryTemp do
  begin
    Close;
    sql.Clear;
    sql.Add('select * from Tat_Plan_QZ where MainId=''' + Trim(FMainId) + '''');
    Open;
  end;
  SCreateCDS(ADOQueryTemp, CDS_QZ);
  SInitCDSData(ADOQueryTemp, CDS_QZ);
 /////////////////刷新起综工艺单信息/////////////////////////
 ///
end;

procedure TfrmTatPlanInPut.Initexcel();
var
  myStream: TMemoryStream;
begin

//  myStream := TMemoryStream.Create();
//
//  with ADOQueryTemp do
//  begin
//    close;
//    sql.Clear;
//    sql.Add(' select * from BS_Cloth_Info_Excel A INNER JOIN Bs_Cloth_Info B on A.BCIID =B.BCIID where B.C_Code=''' + Trim(C_Code.text) + '''');
//    open;
//  end;
//
//  if not ADOQueryTemp.IsEmpty then
//  begin
//
//    TBlobField(ADOQueryTemp.FieldByName('ExcelData')).SaveToStream(myStream);
//    myStream.Position := 0;
//    dxSpreadSheet1.LoadFromStream(myStream);
//  end
//  else
//  begin
////    dxSpreadSheet1.ClearAll;
//  end;
//
//  myStream.Free;
end;

procedure TfrmTatPlanInPut.FormCreate(Sender: TObject);
var
  FDate: TDateTime;
begin
  FDate := SGetServerDateTime(ADOQueryTemp);
  OrdDate.Date := FDate;
  DlyDate.Date := FDate;
end;

procedure TfrmTatPlanInPut.FormShow(Sender: TObject);
begin

  ReadCxGrid('坯布生产计划单录入1', Tv1, '坯布生产管理');
  ReadCxGrid('坯布生产计划单录入2', Tv2, '坯布生产管理');
  InitData();
//  Initexcel();
end;

procedure TfrmTatPlanInPut.FtyCoNamePropertiesButtonClick(Sender: TObject; AButtonIndex: Integer);
begin
  try
    frmCompanySel := TfrmCompanySel.Create(Application);
    with frmCompanySel do
    begin
      FCoType := '供应商';
      if ShowModal = 1 then
      begin
        FtyCoName.Properties.LookupItems.Text := Trim(CDS_1.fieldbyname('CoCode').AsString);
        FtyCoName.Text := Trim(CDS_1.fieldbyname('CoAbbrName').AsString);
      end;
    end;
  finally
    frmCompanySel.Free;
  end;
end;

function TfrmTatPlanInPut.SaveData(): Boolean;
var
  maxno, maxsubno, maxpbno, maxpzno, maxsjno, maxQZID: string;
begin
  try
    ADOQueryCmd.Connection.BeginTrans;
    if Trim(FMainId) = '' then
    begin
      if GetLSNo(ADOQueryCmd, maxno, 'SZ', 'Tat_Plan_Main', 4, 1) = False then
        raise Exception.Create('生成流水号异常！');

      OrderNo.Text := maxno;
    end
    else
    begin
      maxno := Trim(FMainId);
    end;
//////////////////////////            保存主表              //////////////////////////
    with ADOQueryCmd do
    begin
      Close;
      sql.Clear;
      SQL.Add('select * from Tat_Plan_Main where MainId=''' + Trim(FMainId) + '''');
      Open;
    end;
    with ADOQueryCmd do
    begin
      if Trim(FMainId) = '' then
      begin
        Append;
        FieldByName('Filler').Value := Trim(DName);
      end
      else
      begin
        Edit;
        FieldByName('Editer').Value := Trim(DName);
        FieldByName('EditTime').Value := SGetServerDateTime(ADOQueryTemp);
      end;
      FieldByName('MainId').Value := Trim(maxno);
//      FieldByName('QZF').Value := Trim(QZF.text);
      FieldByName('CZF').Value := Trim(CZF.text);
      FieldByName('CKF').Value := Trim(CKF.text);
      RTSetsavedata(ADOQueryCmd, 'Tat_Plan_Main', ScrollBox1, 0);
      Post;
    end;
//////////////////////////            保存主表              //////////////////////////
///
//////////////////////////            保存子表              //////////////////////////
    if Trim(FSubId) = '' then
    begin
      if GetLSNo(ADOQueryTemp, maxsubno, 'SZS', 'Tat_Plan_Sub', 4, 1) = False then
        raise Exception.Create('取子流水号失败！');

    end
    else
    begin
      maxsubno := Trim(FSubId);
    end;
    with ADOQueryCmd do
    begin
      Close;
      SQL.Clear;
      sql.Add('select * from Tat_Plan_Sub where ');
      sql.Add('  SubId=''' + Trim(maxsubno) + '''');
      Open;
    end;
    with ADOQueryCmd do
    begin
      if Trim(FSubId) = '' then
        Append
      else
        Edit;
      FieldByName('MainId').Value := Trim(maxno);
      FieldByName('SubId').Value := Trim(maxsubno);

      RTSetsavedata(ADOQueryCmd, 'Tat_Plan_Sub', ScrollBox1, 2);
      FieldByName('Y_Note_PLJ').Value := Trim(Y_Note_PLJ.Text);

      FieldByName('Y_Note_PLW').Value := Trim(Y_Note_PLW.Text);

      Post;
    end;
//////////////////////////            保存子表              //////////////////////////
//////////////////////////            保存经丝配比表              //////////////////////////
    with CDS_1 do
    begin
      First;
      while not Eof do
      begin
        if Trim(CDS_1.fieldbyname('YRId').AsString) = '' then
        begin
          if GetLSNo(ADOQueryTemp, maxpbno, 'RJ', 'Tat_Plan_Yarn', 4, 1) = False then
            raise Exception.Create('取配比子流水号失败！');

        end
        else
        begin
          maxpbno := Trim(CDS_1.fieldbyname('YRId').AsString);
        end;
        with ADOQueryCmd do
        begin
          Close;
          SQL.Clear;
          sql.Add('select * from Tat_Plan_Yarn where ');
          sql.Add('  YRId=''' + Trim(maxpbno) + '''');
          Open;
        end;
        with ADOQueryCmd do
        begin
          if Trim(CDS_1.fieldbyname('YRId').AsString) = '' then
          begin
            Append;
            FieldByName('Filler').Value := Trim(DName);
            FieldByName('FillTime').Value := SGetServerDateTime(ADOQueryTemp);
          end
          else
          begin
            Edit;
            FieldByName('Editer').Value := Trim(DName);
            FieldByName('EditTime').Value := SGetServerDateTime(ADOQueryTemp);
          end;
          FieldByName('YRType').Value := '经丝';
          FieldByName('MainId').Value := Trim(maxno);
          FieldByName('SubId').Value := Trim(maxsubno);
          FieldByName('YRId').Value := Trim(maxpbno);
          RTSetSaveDataCDS(ADOQueryCmd, Tv2, CDS_1, 'Tat_Plan_Yarn', 0);
          Post;
        end;
        CDS_1.Edit;
        CDS_1.FieldByName('SubId').Value := Trim(maxsubno);
        CDS_1.FieldByName('MainId').Value := Trim(maxno);
        CDS_1.FieldByName('YRId').Value := Trim(maxpbno);

        Next;
      end;
    end;
//////////////////////////            保存经丝配比表              //////////////////////////
//////////////////////
//////////////////////////            保存纬丝配比表              //////////////////////////
    with CDS_2 do
    begin
      First;
      while not Eof do
      begin
        if Trim(CDS_2.fieldbyname('YRId').AsString) = '' then
        begin
          if GetLSNo(ADOQueryTemp, maxpbno, 'RJ', 'Tat_Plan_Yarn', 4, 1) = False then
            raise Exception.Create('取配比子流水号失败！');

        end
        else
        begin
          maxpbno := Trim(CDS_2.fieldbyname('YRId').AsString);
        end;
        with ADOQueryCmd do
        begin
          Close;
          SQL.Clear;
          sql.Add('select * from Tat_Plan_Yarn where ');
          sql.Add('  YRId=''' + Trim(maxpbno) + '''');
          Open;
        end;
        with ADOQueryCmd do
        begin
          if Trim(CDS_2.fieldbyname('YRId').AsString) = '' then
          begin
            Append;
            FieldByName('Filler').Value := Trim(DName);
            FieldByName('FillTime').Value := SGetServerDateTime(ADOQueryTemp);
          end
          else
          begin
            Edit;
            FieldByName('Editer').Value := Trim(DName);
            FieldByName('EditTime').Value := SGetServerDateTime(ADOQueryTemp);
          end;
          FieldByName('YRType').Value := '纬丝';
          FieldByName('MainId').Value := Trim(maxno);
          FieldByName('SubId').Value := Trim(maxsubno);
          FieldByName('YRId').Value := Trim(maxpbno);
          RTSetSaveDataCDS(ADOQueryCmd, Tv2, CDS_2, 'Tat_Plan_Yarn', 0);
          Post;
        end;
        CDS_2.Edit;
        CDS_2.FieldByName('SubId').Value := Trim(maxsubno);
        CDS_2.FieldByName('MainId').Value := Trim(maxno);
        CDS_2.FieldByName('YRId').Value := Trim(maxpbno);

        Next;
      end;
    end;
//////////////////////////            保存纬丝配比表              //////////////////////////
         //////////////////////
//////////////////////////            保存起综              //////////////////////////
    with CDS_QZ do
    begin
      First;
      while not Eof do
      begin
        if Trim(CDS_QZ.fieldbyname('QZID').AsString) = '' then
        begin
          if GetLSNo(ADOQueryTemp, maxQZID, 'QZ', 'Tat_Plan_QZ', 4, 1) = False then
            raise Exception.Create('取配比子流水号失败！');

        end
        else
        begin
          maxQZID := Trim(CDS_QZ.fieldbyname('QZID').AsString);
        end;
        with ADOQueryCmd do
        begin
          Close;
          SQL.Clear;
          sql.Add('select * from Tat_Plan_QZ where ');
          sql.Add('  QZID=''' + Trim(maxQZID) + '''');
          Open;
        end;
        with ADOQueryCmd do
        begin
          if Trim(CDS_QZ.fieldbyname('QZID').AsString) = '' then
          begin
            Append;
//            FieldByName('Filler').Value := Trim(DName);
//            FieldByName('FillTime').Value := SGetServerDateTime(ADOQueryTemp);
          end
          else
          begin
            Edit;
//            FieldByName('Editer').Value := Trim(DName);
//            FieldByName('EditTime').Value := SGetServerDateTime(ADOQueryTemp);
          end;
          FieldByName('MainId').Value := Trim(maxno);
          FieldByName('SubId').Value := Trim(maxsubno);
          FieldByName('QZID').Value := Trim(maxQZID);
          RTSetSaveDataCDS(ADOQueryCmd, Tv4, CDS_QZ, 'Tat_Plan_QZ', 0);
          Post;
        end;
        CDS_QZ.Edit;
        CDS_QZ.FieldByName('SubId').Value := Trim(maxsubno);
        CDS_QZ.FieldByName('MainId').Value := Trim(maxno);
        CDS_QZ.FieldByName('QZID').Value := Trim(maxQZID);

        Next;
      end;
    end;
//////////////////////////            保存起综              //////////////////////////
    ADOQueryCmd.Connection.CommitTrans;
    FMainId := Trim(maxno);
    FSubId := Trim(maxsubno);
    Result := True;
  except
    Result := False;
    CDS_1.EnableControls;
    CDS_2.EnableControls;
    ADOQueryCmd.Connection.RollbackTrans;
    application.MessageBox(PChar(Exception(ExceptObject).Message), '提示信息', 0);

  end;
end;

procedure TfrmTatPlanInPut.TBSaveClick(Sender: TObject);
var
  FReal: Double;
  maxConNo: string;
begin
  OrdDate.SetFocus;
  CALCYarnQty();

  if Trim(CustName.Text) = '' then
  begin
    Application.MessageBox('客户不能为空!', '提示', 0);
    Exit;
  end;

  if Trim(OrdType.Text) = '' then
  begin
    Application.MessageBox('生产类型不能为空!', '提示', 0);
    Exit;
  end;

  if Trim(C_Name.Text) = '' then
  begin
    Application.MessageBox('产品名称不能为空!', '提示', 0);
    Exit;
  end;
  if Trim(C_Code.Text) = '' then
  begin
    Application.MessageBox('产品编号不能为空!', '提示', 0);
    Exit;
  end;

  if Trim(C_Width.Text) = '' then
  begin
    Application.MessageBox('上机门幅不能为空!', '提示', 0);
    Exit;
  end;

  if Trim(OrdQty.Text) = '' then
  begin
    Application.MessageBox('总数量不能为空!', '提示', 0);
    Exit;
  end;
  if Trim(OrdPieceLen.Text) = '' then
  begin
    Application.MessageBox('匹长不能为空!', '提示', 0);
    Exit;
  end;
  if Trim(OrdPiece.Text) = '' then
  begin
    Application.MessageBox('匹数不能为空!', '提示', 0);
    Exit;
  end;

  if TryStrToFloat(OrdQty.Text, FReal) = False then
  begin
    Application.MessageBox('总数量非法数字!', '提示', 0);
    Exit;
  end;
  if TryStrToFloat(OrdPiecelen.Text, FReal) = False then
  begin
    Application.MessageBox('匹长非法数字!', '提示', 0);
    Exit;
  end;
  if TryStrToFloat(OrdPiece.Text, FReal) = False then
  begin
    Application.MessageBox('匹数非法数字!', '提示', 0);
    Exit;
  end;

  if SaveData() then
  begin
    Application.MessageBox('保存成功！', '提示', 0);
    ModalResult := 1;
  end;
end;

procedure TfrmTatPlanInPut.ToolButton7Click(Sender: TObject);
var
  i, j: Integer;
begin
  for j := 0 to 5 do
  begin
    i := CDS_QZ.RecordCount;
    i := i + 1;
    with CDS_QZ do
    begin
      Append;
      FieldByName('SSEL').Value := FALSE;
      FieldByName('XuNO').Value := i;
      Post;
    end;
  end;
end;

procedure TfrmTatPlanInPut.ToolButton8Click(Sender: TObject);
begin
  WriteCxGrid('坯布生产计划单录入1', Tv1, '坯布生产管理');
  WriteCxGrid('坯布生产计划单录入2', Tv2, '坯布生产管理');
end;

procedure TfrmTatPlanInPut.ToolButton9Click(Sender: TObject);
begin
  if CDS_QZ.IsEmpty then
    exit;
  if CDS_QZ.Locate('ssel', True, []) = False then
  begin
    Application.MessageBox('没有选择数据!', '提示', 0);
    Exit;
  end;
  if Application.MessageBox('确定要作废数据吗？作废后数据不能恢复。', '提示', 32 + 4) <> IDYES then
    Exit;
  CDS_QZ.DisableControls;
  with CDS_QZ do
  begin
    First;
    while not Eof do
    begin
      if CDS_QZ.FieldByName('SSel').AsBoolean = True then
      begin
        if Trim(CDS_QZ.fieldbyname('QZID').AsString) <> '' then
          with ADOQueryCmd do
          begin
            Close;
            sql.Clear;
            sql.Add('delete PD_Plan_QZ where QZID=''' + Trim(CDS_QZ.fieldbyname('QZID').AsString) + '''');
            ExecSQL;
          end;
        CDS_QZ.Delete;
      end
      else
        Next;

    end;

  end;
  CDS_QZ.EnableControls;
end;

procedure TfrmTatPlanInPut.cxGridDBColumn1PropertiesButtonClick(Sender: TObject; AButtonIndex: Integer);
begin
  try
    frmYarnInfoSel := TfrmYarnInfoSel.Create(Application);
    with frmYarnInfoSel do
    begin
      if ShowModal = 1 then
      begin
        with self.CDS_2 do
        begin
          Edit;
          FieldByName('Brand').Value := frmYarnInfoSel.CDS_1.fieldbyname('Brand').Value;
          FieldByName('Y_Code').Value := frmYarnInfoSel.CDS_1.fieldbyname('Y_Code').Value;
          FieldByName('Y_Name').Value := frmYarnInfoSel.CDS_1.fieldbyname('Y_Name').Value;
          FieldByName('Y_Spec').Value := frmYarnInfoSel.CDS_1.fieldbyname('Y_Spec').Value;
          FieldByName('Y_Color').Value := frmYarnInfoSel.CDS_1.fieldbyname('Y_Color').Value;
          FieldByName('Denier').Value := frmYarnInfoSel.CDS_1.fieldbyname('Denier').Value;
          Post;
        end;
      end;
    end;
  finally
    frmYarnInfoSel.Free;
  end;
end;

procedure TfrmTatPlanInPut.cxGridDBColumn4PropertiesButtonClick(Sender: TObject; AButtonIndex: Integer);
begin
  try
    frmYarnInfoSel := TfrmYarnInfoSel.Create(Application);
    with frmYarnInfoSel do
    begin
      if ShowModal = 1 then
      begin
        with self.CDS_1 do
        begin
          Append;
          FieldByName('Brand').Value := frmYarnInfoSel.CDS_1.fieldbyname('Brand').Value;
          FieldByName('Y_Code').Value := frmYarnInfoSel.CDS_1.fieldbyname('Y_Code').Value;
          FieldByName('Y_Name').Value := frmYarnInfoSel.CDS_1.fieldbyname('Y_Name').Value;
          FieldByName('Y_Spec').Value := frmYarnInfoSel.CDS_1.fieldbyname('Y_Spec').Value;
          FieldByName('Y_Color').Value := frmYarnInfoSel.CDS_1.fieldbyname('Y_Color').Value;
          FieldByName('Denier').Value := frmYarnInfoSel.CDS_1.fieldbyname('Denier').Value;

          Post;
        end;
      end;
    end;
  finally
    frmYarnInfoSel.Free;
  end;
end;

procedure TfrmTatPlanInPut.v2Column11PropertiesButtonClick(Sender: TObject; AButtonIndex: Integer);
begin
  try
    frmCompanySel := TfrmCompanySel.Create(Application);
    with frmCompanySel do
    begin

      if ShowModal = 1 then
      begin
        with Self.CDS_1 do
        begin
          Edit;
          FieldByName('GYSName').Value := Trim(CDS_1.fieldbyname('CoName').AsString);
        end;
      end;
    end;
  finally
    frmCompanySel.Free;
  end;
end;

procedure TfrmTatPlanInPut.OrdPieceLenChange(Sender: TObject);
var
  FOrdQty, FOrdPieceLen: Double;
begin
  FOrdQty := StrToFloatDef(OrdQty.Text, 0);
  FOrdPieceLen := StrToFloatDef(OrdPieceLen.Text, 0);
  if FOrdPieceLen > 0 then
    OrdPiece.Text := IntToStr(Ceil(FOrdQty / FOrdPieceLen));
end;

procedure TfrmTatPlanInPut.OrdPiecePropertiesEditValueChanged(Sender: TObject);
begin
  OrdQty.text := floattostr(strtofloatdef(OrdPiece.text, 0) * strtofloatdef(OrdPieceLen.text, 0));
end;

procedure TfrmTatPlanInPut.OurCoNameDblClick(Sender: TObject);
begin
  TcxButtonEdit(Sender).Properties.LookupItems.Text := '';
  TcxButtonEdit(Sender).Text := '';
end;

procedure TfrmTatPlanInPut.OurCoNamePropertiesButtonClick(Sender: TObject; AButtonIndex: Integer);
begin
  try
    frmCompanySel := TfrmCompanySel.Create(Application);
    with frmCompanySel do
    begin
      FCoType := '我司';
      if ShowModal = 1 then
      begin
        OurCoName.Properties.LookupItems.Text := Trim(CDS_1.fieldbyname('CoCode').AsString);
        OurCoName.Text := Trim(CDS_1.fieldbyname('CoAbbrName').AsString);
        FtyCoName.Properties.LookupItems.Text := Trim(CDS_1.fieldbyname('CoCode').AsString);
        FtyCoName.Text := Trim(CDS_1.fieldbyname('CoAbbrName').AsString);
      end;
    end;
  finally
    frmCompanySel.Free;
  end;
end;

procedure TfrmTatPlanInPut.OrdPieceChange(Sender: TObject);
var
  FOrdQty, FOrdPieceLen, FOrdPiece: Double;
begin
  FOrdPieceLen := StrToFloatDef(OrdPieceLen.Text, 0);
  FOrdPiece := StrToFloatDef(OrdPiece.Text, 0);
  if FOrdPiece > 0 then
    OrdQty.Text := FloatToStr(FOrdPieceLen * FOrdPiece)
  else
    OrdQty.Text := '0';
end;

procedure TfrmTatPlanInPut.C_CodeKeyPress(Sender: TObject; var Key: Char);
begin
  if Key = #13 then
  begin
    Key := #0;
    SelectNext(ActiveControl as TWinControl, True, True);
  end;
end;

procedure TfrmTatPlanInPut.C_CodePropertiesButtonClick(Sender: TObject; AButtonIndex: Integer);
begin
  try
    frmTatClothInfoSel := TfrmTatClothInfoSel.Create(Application);
    with frmTatClothInfoSel do
    begin
      if ShowModal = 1 then
      begin
        InitClothYarn(frmTatClothInfoSel.CDS_1.fieldbyname('C_Code').AsString);
        Initexcel();
      end;
    end;
  finally
    frmTatClothInfoSel.Free;
  end;
end;

procedure TfrmTatPlanInPut.Edit1KeyPress(Sender: TObject; var Key: Char);
var
  i, j: Integer;
begin
//  if Key = #13 then
//  begin
//
//    if Edit1.Text <> '' then
//    begin
//      i := CDS_QZ.RecordCount;
//      i := i + 1;
//      with CDS_QZ do
//      begin
//        Append;
//        FieldByName('SSEL').Value := FALSE;
//        FieldByName('XuNO').Value := i;
//        FieldByName('DZZQZGL').Value := Trim(Edit1.Text);
//        Post;
//      end;
//      Edit1.Text := '';
//    end;
//
//  end;
end;

procedure TfrmTatPlanInPut.MCTypeBtnUpClick(Sender: TObject);
var
  fsj: string;
  FWZ: Integer;
begin
  fsj := Trim(TBtnEditC(Sender).Hint);

  FWZ := Pos('/', fsj);
  try
    frmZDYHelp := TfrmZDYHelp.Create(Application);
    with frmZDYHelp do
    begin
      flag := Copy(fsj, 1, FWZ - 1);
      flagname := Copy(fsj, FWZ + 1, Length(fsj) - FWZ);

      if ShowModal = 1 then
      begin
        TBtnEditC(Sender).Text := Trim(ClientDataSet1.fieldbyname('ZDYName').AsString);
      end;
    end;
  finally
    frmZDYHelp.Free;
  end;

end;

procedure TfrmTatPlanInPut.ConNoKeyPress(Sender: TObject; var Key: Char);
begin
  if Key = #13 then
  begin
    Key := #0;
    SelectNext(ActiveControl as TWinControl, True, True);
  end;
end;

procedure TfrmTatPlanInPut.ConNoPropertiesButtonClick(Sender: TObject; AButtonIndex: Integer);
var
  FConMainId, FMPRTCode: string;
begin
  try
    frmTradeSalesContractSel := TfrmTradeSalesContractSel.Create(Application);
    with frmTradeSalesContractSel do
    begin
      fconNo := self.ConNo.Text;
      fC_Code := self.C_Code.Text;
      FLX := '梭织生产单';

      if ShowModal = 1 then
      begin

        self.CustName.Properties.LookupItems.Text := Trim(frmTradeSalesContractSel.CDS_1.fieldbyname('BuyNo').AsString);
        self.CustName.Text := Trim(frmTradeSalesContractSel.CDS_1.fieldbyname('BuyName').AsString);

        self.OurCoName.Properties.LookupItems.Text := Trim(frmTradeSalesContractSel.CDS_1.fieldbyname('Sellno').AsString);
        self.OurCoName.Text := Trim(frmTradeSalesContractSel.CDS_1.fieldbyname('Sellname').AsString);

        self.FtyCoName.Properties.LookupItems.Text := Trim(frmTradeSalesContractSel.CDS_1.fieldbyname('Sellno').AsString);
        self.FtyCoName.Text := Trim(frmTradeSalesContractSel.CDS_1.fieldbyname('Sellname').AsString);

        self.ConNo.Text := Trim(frmTradeSalesContractSel.CDS_1.fieldbyname('ConNo').AsString);
        self.ConMId.Text := Trim(frmTradeSalesContractSel.CDS_1.fieldbyname('ConMId').AsString);
        self.ConSId.Text := Trim(frmTradeSalesContractSel.CDS_1.fieldbyname('ConSId').AsString);
        self.Saleser.Text := Trim(frmTradeSalesContractSel.CDS_1.fieldbyname('Saleser').AsString);
        self.C_Code.Text := Trim(frmTradeSalesContractSel.CDS_1.fieldbyname('C_Code').AsString);

        self.C_Width.Text := Trim(frmTradeSalesContractSel.CDS_1.fieldbyname('C_Width').AsString);

        self.C_GramWeight.Text := Trim(frmTradeSalesContractSel.CDS_1.fieldbyname('C_GramWeight').AsString);
        self.BBNO.Text := Trim(frmTradeSalesContractSel.CDS_1.fieldbyname('BBNO').AsString);
        self.C_Color.Text := Trim(frmTradeSalesContractSel.CDS_1.fieldbyname('C_Color').AsString);
        self.OrdQty.Text := Trim(frmTradeSalesContractSel.CDS_1.fieldbyname('ConQty').AsString);
        InitClothYarn(frmTradeSalesContractSel.CDS_1.fieldbyname('C_Code').AsString);
        Initexcel();
      end;
    end;
  finally
    frmTradeSalesContractSel.Free;
  end;
end;

procedure TfrmTatPlanInPut.CustNamePropertiesButtonClick(Sender: TObject; AButtonIndex: Integer);
begin
  try
    frmCompanySel := TfrmCompanySel.Create(Application);
    with frmCompanySel do
    begin
      FCoType := '客户';
      if ShowModal = 1 then
      begin
        CustName.Properties.LookupItems.Text := Trim(CDS_1.fieldbyname('CoCode').AsString);
        CustName.Text := Trim(CDS_1.fieldbyname('CoAbbrName').AsString);
      end;
    end;
  finally
    frmCompanySel.Free;
  end;
end;

end.