unit U_TradeSampleClothInImport;

interface

uses
  Windows, Messages, SysUtils, Variants, Classes, Graphics, Controls, Forms,
  Dialogs, cxStyles, cxCustomData, cxGraphics, cxFilter, cxData, cxDataStorage,
  cxEdit, DB, cxDBData, cxCalendar, cxDropDownEdit, ComCtrls, ToolWin,
  cxGridLevel, cxGridCustomTableView, cxGridTableView, cxGridDBTableView,
  cxClasses, cxControls, cxGridCustomView, cxGrid, cxGridCustomPopupMenu,
  cxGridPopupMenu, ADODB, DBClient, cxButtonEdit, cxTextEdit, StdCtrls, ExtCtrls,
  cxLookAndFeels, cxLookAndFeelPainters, cxNavigator, 
   dxDateRanges, dxBarBuiltInMenu, U_BaseInput,
  System.ImageList, Vcl.ImgList, ComObj,  dxScrollbarAnnotations,
      
     
     
     
     
    
    
    
    
    
     
     
     
    
    
    cxContainer, dxCore, cxDateUtils,
  cxMaskEdit;

type
  TfrmTradeSampleClothInImport = class(TfrmBaseInput)
    cxGrid2: TcxGrid;
    Tv1: TcxGridDBTableView;
    v1SPName: TcxGridDBColumn;
    v2Column6: TcxGridDBColumn;
    cxGrid2Level1: TcxGridLevel;
    ToolBar1: TToolBar;
    TBAdd: TToolButton;
    TBDel: TToolButton;
    TBSave: TToolButton;
    TBClose: TToolButton;
    DataSource3: TDataSource;
    CDS_Sub: TClientDataSet;
    ADOQueryCmd: TADOQuery;
    ADOQueryMain: TADOQuery;
    ADOQueryTemp: TADOQuery;
    GPM_1: TcxGridPopupMenu;
    v1Column12: TcxGridDBColumn;
    v1FactoryName: TcxGridDBColumn;
    v1SPSpec: TcxGridDBColumn;
    v1QtyUnit: TcxGridDBColumn;
    v1Column5: TcxGridDBColumn;
    v1Column1: TcxGridDBColumn;
    v1SPMF: TcxGridDBColumn;
    v1Column8: TcxGridDBColumn;
    v1Column7: TcxGridDBColumn;
    Tv1Column3: TcxGridDBColumn;
    Tv1Column1: TcxGridDBColumn;
    Tv1Column2: TcxGridDBColumn;
    Tv1Column4: TcxGridDBColumn;
    ToolButton1: TToolButton;
    Tv1Column6: TcxGridDBColumn;
    Tv1Column7: TcxGridDBColumn;
    Tv1Column8: TcxGridDBColumn;
    Tv1Column9: TcxGridDBColumn;
    Tv1Column10: TcxGridDBColumn;
    Tv1Column11: TcxGridDBColumn;
    Tv1Column5: TcxGridDBColumn;
    ToolButton2: TToolButton;
    CDS_LM: TClientDataSet;
    OpenDialog1: TOpenDialog;
    Tv1Column12: TcxGridDBColumn;
    Tv1Column13: TcxGridDBColumn;
    Tv1Column14: TcxGridDBColumn;
    Tv1Column15: TcxGridDBColumn;
    Tv1Column16: TcxGridDBColumn;
    Tv1Column17: TcxGridDBColumn;
    Tv1Column18: TcxGridDBColumn;
    Tv1Column19: TcxGridDBColumn;
    Tv1Column20: TcxGridDBColumn;
    Tv1Column21: TcxGridDBColumn;
    Tv1Column22: TcxGridDBColumn;
    Tv1Column23: TcxGridDBColumn;
    Tv1Column24: TcxGridDBColumn;
    Tv1Column25: TcxGridDBColumn;
    procedure FormClose(Sender: TObject; var Action: TCloseAction);
    procedure TBCloseClick(Sender: TObject);
    procedure FormShow(Sender: TObject);
    procedure TBDelClick(Sender: TObject);
    procedure TBSaveClick(Sender: TObject);
    procedure v1Column14PropertiesButtonClick(Sender: TObject; AButtonIndex: Integer);
    procedure v2Column1PropertiesButtonClick(Sender: TObject; AButtonIndex: Integer);
    procedure v1Column5PropertiesButtonClick(Sender: TObject; AButtonIndex: Integer);
    procedure v1Column8PropertiesButtonClick(Sender: TObject; AButtonIndex: Integer);
    procedure Tv1Column1PropertiesButtonClick(Sender: TObject; AButtonIndex: Integer);
    procedure Tv1Column4PropertiesButtonClick(Sender: TObject; AButtonIndex: Integer);
    procedure ToolButton1Click(Sender: TObject);
    procedure Tv1Column8PropertiesButtonClick(Sender: TObject; AButtonIndex: Integer);
    procedure ToolButton2Click(Sender: TObject);
    procedure Tv1Column16PropertiesButtonClick(Sender: TObject; AButtonIndex: Integer);
  private
    { Private declarations }
    function SaveCKData(): Boolean;
  public
    { Public declarations }
    FBCId, canshu3, FSTKName, FKHName: string;
  end;

var
  frmTradeSampleClothInImport: TfrmTradeSampleClothInImport;

implementation

uses
  U_DataLink, U_RTFun, U_ZDYHelp, U_CompanySel, U_TradePlanSel, U_ClothInfoSel;

{$R *.dfm}

procedure TfrmTradeSampleClothInImport.FormClose(Sender: TObject; var Action: TCloseAction);
begin
  inherited;
  Action := caFree;
end;

function TfrmTradeSampleClothInImport.SaveCKData(): Boolean;
var
  Maxno, MBCIOID: string;
begin
  try
    ADOQueryCmd.Connection.BeginTrans;
    CDS_Sub.DisableControls;
    with CDS_Sub do
    begin
      First;
      while not eof do
      begin
        with ADOQueryTemp do
        begin
          Close;
          sql.Clear;
          sql.Add('select * from BS_Cloth_IO where BCIOID=''' + Trim(CDS_Sub.fieldbyname('BCIOID').AsString) + '''');
          open;
        end;
        MBCIOID := Trim(ADOQueryTemp.fieldbyname('BCIOID').AsString);
        if Trim(MBCIOID) = '' then
        begin
          if not GetLSNo(ADOQueryCmd, Maxno, 'MR', 'BS_Cloth_IO', 4, 1) then
            raise Exception.Create('取染色坯布入库编号失败！');
        end
        else
        begin
          Maxno := Trim(MBCIOID);
        end;
        with ADOQueryCmd do
        begin
          Close;
          sql.Clear;
          sql.Add('select * from BS_Cloth_IO where BCIOID=''' + Trim(Maxno) + '''');
          Open;
        end;
        with ADOQueryCmd do
        begin
          if Trim(MBCIOID) = '' then
          begin
            Append;
            FieldByName('Fillid').Value := Trim(Dcode);
            FieldByName('Filler').Value := Trim(DName);
          end
          else
          begin
            Edit;
            FieldByName('Editid').Value := Trim(Dcode);
            FieldByName('Editer').Value := Trim(DName);
            FieldByName('EditTime').Value := SGetServerDate(ADOQueryTemp);
          end;
          RTSetSaveDataCDS(ADOQueryCmd, Tv1, CDS_Sub, 'BS_Cloth_IO', 0);

          FieldByName('CustNo').Value := CDS_Sub.fieldbyname('CustNo').Value;
          FieldByName('FromCoNo').Value := CDS_Sub.fieldbyname('FromCoNo').Value;
          FieldByName('StkCoNo').Value := CDS_Sub.fieldbyname('StkCoNo').Value;

          FieldByName('FromMainId').Value := CDS_Sub.fieldbyname('FromMainId').Value;
          FieldByName('FromSubId').Value := CDS_Sub.fieldbyname('FromSubId').Value;

          FieldByName('BCIOID').Value := Trim(Maxno);
          FieldByName('STKID').Value := Trim(Maxno);
          FieldByName('STKName').Value := FSTKName;
          FieldByName('IOFlag').Value := '入库';
          FieldByName('IOQtyFlag').Value := 1;
          Post;
        end;
        with ADOQueryCmd do
        begin
          Close;
          sql.Clear;
          sql.Add('Update BS_Cloth_IO Set StkPiece=(select Sum(isnull(Piece,0)*IOQtyFlag) from BS_Cloth_IO A where A.STKID=BS_Cloth_IO.BCIOID )');
          sql.Add(',StkQty=(select Sum(isnull(Qty,0)*IOQtyFlag) from BS_Cloth_IO A where A.STKID=BS_Cloth_IO.BCIOID )');
          sql.Add(' where BCIOID=''' + Trim(Maxno) + '''');
          ExecSQL;
        end;
        with ADOQueryTemp do
        begin
          Close;
          sql.Clear;
          sql.Add('select stkQty,StkPiece from BS_Cloth_IO where BCIOID=''' + Trim(Maxno) + '''');
          Open;
        end;
        if ADOQueryTemp.FieldByName('stkQty').Value < 0 then
          raise Exception.Create('入库数量小于出库数量不能保存!');
        if ADOQueryTemp.FieldByName('StkPiece').Value < 0 then
          raise Exception.Create('入库匹数小于出库匹数不能保存!');
        with ADOQueryCmd do
        begin
          Close;
          sql.Clear;
          sql.Add('insert into Finance_Need_Up(UType,UDataId,UOperation,UOperator,UModule,UDetails)       ');
          sql.Add('values(''贸易样布入库''    ');
          sql.Add(',' + quotedstr(Maxno));
          sql.Add(',''保存''   ');
          sql.Add(',' + quotedstr(DName));
          sql.Add(',' + quotedstr(trim(self.Caption)));
          sql.Add(',' + quotedstr(Maxno));
          sql.Add(')  ');
          ExecSQL;
        end;
        Edit;
        FieldByName('BCIOID').Value := Trim(Maxno);
        Post;
        Next;
      end;
    end;

    CDS_Sub.EnableControls;
    ADOQueryCmd.Connection.CommitTrans;

    Result := True;
  except
    Result := False;
    ADOQueryCmd.Connection.RollbackTrans;
    application.MessageBox(PChar(Exception(ExceptObject).Message), '提示信息', 0);
  end;

end;

procedure TfrmTradeSampleClothInImport.TBCloseClick(Sender: TObject);
begin

  Close;
end;

procedure TfrmTradeSampleClothInImport.FormShow(Sender: TObject);
begin
  inherited;
  ReadCxGrid(FSTKName + '入库登记', Tv1, '贸易汇总仓库');
  with CDS_LM do
  begin
    FieldDefs.Clear;
    FieldDefs.Add('LXH', ftInteger, 0);
    FieldDefs.Add('lCode', ftString, 40);
    FieldDefs.Add('LName', ftString, 40);
    close;
    CreateDataSet;
  end;

  with ADOQueryTemp do
  begin
    Close;
    sql.Clear;
    sql.Add(' select A.* ');
    sql.Add(' from BS_Cloth_IO A');
    sql.Add(' where BCIOID=''' + Trim(FBCId) + '''');
    Open;
  end;
  SCreateCDS(ADOQueryTemp, CDS_Sub);
  SInitCDSData(ADOQueryTemp, CDS_Sub);
end;

procedure TfrmTradeSampleClothInImport.TBDelClick(Sender: TObject);
begin
  if CDS_Sub.IsEmpty then
    Exit;
  if Trim(CDS_Sub.fieldbyname('BCIOID').AsString) <> '' then
  begin
    if Application.MessageBox('确定要删除数据吗？', '提示', 32 + 4) <> IDYES then
      Exit;
    with ADOQueryTemp do
    begin
      Close;
      sql.Clear;
      sql.Add('exec P_Fin_Flow_Judge ');
      Sql.Add(' @FFIDS=' + quotedstr(Trim(CDS_Sub.fieldbyname('BCIOID').AsString)));
      Sql.Add(',@DCode=' + quotedstr(Trim(DCode)));
      Sql.Add(',@DName=' + quotedstr(Trim(DName)));
      Open;
    end;
    if ADOQueryTemp.FieldByName('intReturn').AsInteger = -1 then
    begin
      Application.MessageBox(PChar(ADOQueryTemp.fieldbyname('ShowMsg').AsString), '提示', 0);
      exit;
    end;
    try
      ADOQueryCmd.Connection.BeginTrans;
      with ADOQueryCmd do
      begin
        Close;
        Sql.Clear;
        sql.Add('insert into Finance_Need_Up(UType,UDataId,UOperation,UOperator,UModule,UDetails)       ');
        sql.Add('values(''贸易样布入库''    ');
        sql.Add(',' + quotedstr(Trim(CDS_Sub.fieldbyname('BCIOID').AsString)));
        sql.Add(',''删除''   ');
        sql.Add(',' + quotedstr(DName));
        sql.Add(',' + quotedstr(trim(self.Caption)));
        sql.Add(',' + quotedstr(Trim(CDS_Sub.fieldbyname('BCIOID').AsString)));
        sql.Add(')  ');

        Sql.Add('exec P_BS_Cloth_In_Del ');
        Sql.Add(' @BCIOIDS=' + quotedstr(Trim(CDS_Sub.fieldbyname('BCIOID').AsString)));
        Sql.Add(',@DCode=' + quotedstr(Trim(DCode)));
        Sql.Add(',@DName=' + quotedstr(Trim(DName)));
        Open;
      end;
      if ADOQueryCmd.FieldByName('intReturn').AsInteger = -1 then
        raise Exception.Create(pchar(trim(ADOQueryCmd.FieldByName('ShowMsg').AsString)));
      ADOQueryCmd.Connection.CommitTrans;
      CDS_Sub.Delete;
    except
      ADOQueryCmd.Connection.RollbackTrans;
      application.MessageBox(PChar(Exception(ExceptObject).Message), '提示信息', 0);
    end;
  end
  else
  begin
    CDS_Sub.Delete;
  end;

end;

procedure TfrmTradeSampleClothInImport.TBSaveClick(Sender: TObject);
begin
  if CDS_Sub.IsEmpty then
    Exit;
  if CDS_Sub.Locate('IOTime', null, []) = True then
  begin
    Application.MessageBox('入库时间不能为空!', '提示', 0);
    Exit;
  end;
  if CDS_Sub.Locate('IOType', null, []) = True then
  begin
    Application.MessageBox('入库类型不能为空!', '提示', 0);
    Exit;
  end;
  if CDS_Sub.Locate('C_Pack', null, []) = True then
  begin
    Application.MessageBox('类型不能为空!', '提示', 0);
    Exit;
  end;

  if CDS_Sub.Locate('C_Name', null, []) = True then
  begin
    Application.MessageBox('品名不能为空!', '提示', 0);
    Exit;
  end;

  if CDS_Sub.Locate('Qty', null, []) = True then
  begin
    Application.MessageBox('数量不能为空!', '提示', 0);
    Exit;
  end;
  if CDS_Sub.Locate('QtyUnit', null, []) = True then
  begin
    Application.MessageBox('数量单位不能为空!', '提示', 0);
    Exit;
  end;

  if SaveCKData() then
  begin
    Application.MessageBox('保存成功!', '提示', 0);
    //ModalResult:=1;
    Exit;
  end;
end;

procedure TfrmTradeSampleClothInImport.ToolButton1Click(Sender: TObject);
begin
  WriteCxGrid(FSTKName + '入库登记', Tv1, '贸易汇总仓库');
end;

procedure TfrmTradeSampleClothInImport.ToolButton2Click(Sender: TObject);
var
  excelApp, WorkBook: Variant;
  i, j, k, LX, ExcelRowCount: integer;
  maxId, FCPID, FCPName, t1, t2, t3, FFID: string;
begin

  try
    excelApp := CreateOleObject('Excel.Application');
    openDialog1.Filter := '*.CSV;*.xls';
    if opendialog1.Execute then
    begin
      WorkBook := excelApp.WorkBooks.Open(OpenDialog1.FileName);
    end
    else
      exit;
    excelApp.Visible := false;
    ExcelRowCount := WorkBook.WorkSheets[1].UsedRange.Rows.Count;
  except
    application.MessageBox('加载EXCEL错误！', '错误信息', MB_ICONERROR);
    exit;
  end;

  CDS_LM.EmptyDataSet;

  for j := 0 to Tv1.ColumnCount - 1 do
  begin
    with CDS_LM do
    begin
      Append;
      FieldByName('LCode').Value := trim(Tv1.Columns[j].DataBinding.FieldName);
      FieldByName('LName').Value := trim(Tv1.Columns[j].Caption);
      Post;
    end;
  end;

  try
    for i := 1 to 50 do
    begin
      if trim(WorkBook.WorkSheets[1].Cells[1, i].value) = '' then
        continue;
      if CDS_LM.Locate('LName', trim(WorkBook.WorkSheets[1].Cells[1, i].value), []) then
      begin
        with CDS_LM do
        begin
          Edit;
          FieldByName('LXH').Value := i;
          Post;
        end;
      end;
    end;
  except
    application.MessageBox('加载数组错误！', '错误信息', MB_ICONERROR);
    exit;
  end;

  try
    for i := 2 to ExcelRowCount do
    begin
      with CDS_Sub do
      begin
        Append;
        CDS_LM.First;
        while not CDS_LM.Eof do
        begin
          if CDS_LM.FieldByName('LXH').AsInteger > 0 then
            CDS_Sub.fieldbyname(CDS_LM.FieldByName('LCode').AsString).Value := WorkBook.WorkSheets[1].Cells[i, CDS_LM.FieldByName('LXH').AsInteger].Value;
          CDS_LM.Next;
        end;
        Post;
      end;
    end;
    WorkBook.Close;
    excelApp.Quit;
    excelApp := Unassigned;
    WorkBook := Unassigned;
  except
    WorkBook.Close;
    excelApp.Quit;
    excelApp := Unassigned;
    WorkBook := Unassigned;
    exit;
  end;

end;

procedure TfrmTradeSampleClothInImport.Tv1Column16PropertiesButtonClick(Sender: TObject; AButtonIndex: Integer);
begin
  try
    frmCompanySel := TfrmCompanySel.Create(Application);
    with frmCompanySel do
    begin
      FCoType := '客户';
      if ShowModal = 1 then
      begin
        with Self.CDS_Sub do
        begin
          Edit;
          FieldByName('CustNo').Value := Trim(CDS_1.fieldbyname('CoCode').AsString);
          FieldByName('CustName').Value := Trim(CDS_1.fieldbyname('CoAbbrName').AsString);
        end;
      end;
    end;
  finally
    frmCompanySel.Free;
  end;
end;

procedure TfrmTradeSampleClothInImport.Tv1Column1PropertiesButtonClick(Sender: TObject; AButtonIndex: Integer);
begin
  try
    frmCompanySel := TfrmCompanySel.Create(Application);
    with frmCompanySel do
    begin
      FCoType := '供应商';
      if ShowModal = 1 then
      begin
        with Self.CDS_Sub do
        begin
          Edit;
          FieldByName('StkCoNo').Value := Trim(CDS_1.fieldbyname('CoCode').AsString);
          FieldByName('StkCoName').Value := Trim(CDS_1.fieldbyname('CoAbbrName').AsString);
        end;
      end;
    end;
  finally
    frmCompanySel.Free;
  end;

end;

procedure TfrmTradeSampleClothInImport.Tv1Column4PropertiesButtonClick(Sender: TObject; AButtonIndex: Integer);
begin
  try
    frmTradePlanSel := TfrmTradePlanSel.Create(Application);
    with frmTradePlanSel do
    begin
      if ShowModal = 1 then
      begin
        with Self.CDS_Sub do
        begin
          Edit;
          FieldByName('FromCoNo').Value := Trim(frmTradePlanSel.CDS_1.fieldbyname('FtyNo').AsString);
          FieldByName('FromCoName').Value := Trim(frmTradePlanSel.CDS_1.fieldbyname('FtyName').AsString);
          FieldByName('FromOrdNo').Value := Trim(frmTradePlanSel.CDS_1.fieldbyname('OrderNo').AsString);
          FieldByName('FromMainId').Value := Trim(frmTradePlanSel.CDS_1.fieldbyname('MainId').AsString);
          FieldByName('FromSubId').Value := Trim(frmTradePlanSel.CDS_1.fieldbyname('SubId').AsString);
          FieldByName('C_Code').Value := Trim(frmTradePlanSel.CDS_1.fieldbyname('C_Code').AsString);
          FieldByName('C_Name').Value := Trim(frmTradePlanSel.CDS_1.fieldbyname('C_Name').AsString);
          FieldByName('C_Spec').Value := Trim(frmTradePlanSel.CDS_1.fieldbyname('C_Spec').AsString);
          FieldByName('C_Composition').Value := Trim(frmTradePlanSel.CDS_1.fieldbyname('C_Composition').AsString);
          FieldByName('C_Width').Value := Trim(frmTradePlanSel.CDS_1.fieldbyname('C_Width').AsString);
          FieldByName('C_GramWeight').Value := Trim(frmTradePlanSel.CDS_1.fieldbyname('C_GramWeight').AsString);
          FieldByName('C_Color').Value := Trim(frmTradePlanSel.CDS_1.fieldbyname('C_Color').AsString);
          FieldByName('C_ColorNo').Value := Trim(frmTradePlanSel.CDS_1.fieldbyname('C_ColorNo').AsString);
          FieldByName('C_Pattern').Value := Trim(frmTradePlanSel.CDS_1.fieldbyname('C_Pattern').AsString);
        end;
      end;
    end;
  finally
    frmTradePlanSel.Free;
  end;

end;

procedure TfrmTradeSampleClothInImport.Tv1Column8PropertiesButtonClick(Sender: TObject; AButtonIndex: Integer);
begin
  try
    frmClothInfoSel := TfrmClothInfoSel.Create(Application);
    with frmClothInfoSel do
    begin
      if ShowModal = 1 then
      begin
        with Self.CDS_Sub do
        begin
          edit;
          FieldByName('C_Code').Value := trim(frmClothInfoSel.CDS_1.Fieldbyname('C_Code').AsString);
          FieldByName('C_Name').Value := trim(frmClothInfoSel.CDS_1.Fieldbyname('C_Name').AsString);
          FieldByName('C_Spec').Value := trim(frmClothInfoSel.CDS_1.Fieldbyname('C_Spec').AsString);
          FieldByName('C_Composition').Value := trim(frmClothInfoSel.CDS_1.Fieldbyname('C_Composition').AsString);
          FieldByName('C_Width').Value := trim(frmClothInfoSel.CDS_1.Fieldbyname('C_Width').AsString);
          FieldByName('C_GramWeight').Value := trim(frmClothInfoSel.CDS_1.Fieldbyname('C_GramWeight').AsString);

          Fieldbyname('C_ColorNo').value := trim(frmClothInfoSel.CDS_1.Fieldbyname('C_ColorNo').AsString);
          Fieldbyname('C_Color').value := trim(frmClothInfoSel.CDS_1.Fieldbyname('C_Color').AsString);
          Fieldbyname('C_Pattern').value := trim(frmClothInfoSel.CDS_1.Fieldbyname('C_Pattern').AsString);
          Fieldbyname('GC_Name').value := trim(frmClothInfoSel.CDS_1.Fieldbyname('GC_Name').AsString);
          Fieldbyname('CraftCode').value := trim(frmClothInfoSel.CDS_1.Fieldbyname('CraftCode').AsString);
        end;

      end;
    end;
  finally
    frmClothInfoSel.Free;
  end;

end;

procedure TfrmTradeSampleClothInImport.v1Column14PropertiesButtonClick(Sender: TObject; AButtonIndex: Integer);
begin

  try
    frmCompanySel := TfrmCompanySel.Create(Application);
    with frmCompanySel do
    begin
      FCoType := '供应商';
      if ShowModal = 1 then
      begin
        with Self.CDS_Sub do
        begin
          Edit;
          FieldByName('FromCoNo').Value := Trim(CDS_1.fieldbyname('CoCode').AsString);
          FieldByName('FromCoName').Value := Trim(CDS_1.fieldbyname('CoAbbrName').AsString);

          FieldByName('SalesER').Value := Trim(CDS_1.fieldbyname('SalesER').AsString);
        end;
      end;
    end;
  finally
    frmCompanySel.Free;
  end;

end;

procedure TfrmTradeSampleClothInImport.v2Column1PropertiesButtonClick(Sender: TObject; AButtonIndex: Integer);
begin
  try
    frmZDYHelp := TfrmZDYHelp.Create(Application);
    with frmZDYHelp do
    begin
      flag := 'JWLYCLName';
      flagname := '品名';
      MainType := FSTKName;
      if ShowModal = 1 then
      begin
        with Self.CDS_Sub do
        begin
          Edit;
          FieldByName('C_Name').Value := Trim(frmZDYHelp.ClientDataSet1.fieldbyname('ZdyName').AsString);
        end;
      end;
    end;
  finally
    frmZDYHelp.Free;
  end;

end;

procedure TfrmTradeSampleClothInImport.v1Column5PropertiesButtonClick(Sender: TObject; AButtonIndex: Integer);
begin
  try
    frmZDYHelp := TfrmZDYHelp.Create(Application);
    with frmZDYHelp do
    begin
      flag := 'StkPosition';
      flagname := '库位';
      MainType := FSTKName;
      if ShowModal = 1 then
      begin
        with Self.CDS_Sub do
        begin
          Edit;
          FieldByName('StkPosition').Value := Trim(frmZDYHelp.ClientDataSet1.fieldbyname('ZdyName').AsString);
        end;
      end;
    end;
  finally
    frmZDYHelp.Free;
  end;
end;

procedure TfrmTradeSampleClothInImport.v1Column8PropertiesButtonClick(Sender: TObject; AButtonIndex: Integer);
begin
  try
    frmZDYHelp := TfrmZDYHelp.Create(Application);
    with frmZDYHelp do
    begin
      flag := 'C_Spec';
      flagname := '规格';
      MainType := FSTKName;
      if ShowModal = 1 then
      begin
        with Self.CDS_Sub do
        begin
          Edit;
          FieldByName('C_Spec').Value := Trim(frmZDYHelp.ClientDataSet1.fieldbyname('ZdyName').AsString);
        end;
      end;
    end;
  finally
    frmZDYHelp.Free;
  end;
end;

end.